What is the Low-Pressure 4-Port Switching Valve? Learn how to use valve models V-100D, V-100L, and V-100T in your fluidic system.
Full story

What is the Low-Pressure 4-Port Switching Valve? Learn how to use the following valve models: V-101D, V-101L, V-101T and find instructions for bulkhead monitoring.
Full story

In this resource guide, find recommended fittings for 25 μm ID Tubing and instructions to install the correct fitting to the 25 μm ID Tubing.
Full story

Learn how to connect an ultra-low volume back pressure regulator to your fluidic system. Included in this resource is a back pressure adjustment chart to consider during initial installation.
Full story

Learn how to add an Inline Check Valve to the holder and onto a piece of tubing.
Full story

Learn how to use the FlushNut™ Wrench to tighten or loosen a fitting to tubing.
Full story

Learn how to use the Bottom-of-the-Bottle™ Solvent Filter in your fluidic flow path.
Full story

Learn how to insert Super Flangeless Ferrules with PEEK locking ring into tubing.
Full story

The Quick-Stop Luer Check Valve is designed to work in conjunction with the IDEX Health & Science 1/4-28 Female to Male Quick Connect Luer Adapter. Review this instruction guide for more detail.
Full story

Learn how to use the Biocompatible Inlet / Outlet 1/4-28 to 10-32 Inline Check Valve from IDEX Health & Science in your fluidic flow path.
Full story

Learn how to use the Biocompatible Inlet / Outlet 1/4-28 to 10-32 Inline Check Valve in your fluidic flow path.
Full story

Learn how to use the IDEX Health & Science Bulkhead Quick-Stop Luer Check Valve in conjunction with the 1/4-28 Female to Male Quick Connect Luer Adapter.
Full story

Learn best practices to use the IDEX Health & Science Micro-Volume Inline Check Valve.
Full story

Instructions how to use IDEX Health & Science's A-330 Semi-Prep Filter
Full story

Learn how to install the 10-32 check valve into any 10-32 threaded coned female port.
Full story

Learn how to properly assemble a VacuTight™ Ferrule and VacuTight™ nut onto a piece of tubing.
Full story

Learn how to add the IDEX Health & Science high pressure biocompatible inline filter to your fluidic pathway.
Full story

Learn how to add the IDEX Health & Science High Pressure Semi-Prep Biocompatible Inline Filter to your fluidic pathway.
Full story

The IDEX Health & Science Polymeric Tubing Cutter is designed to work on all types of polymeric tubing, including Teflon® and Tefzel®. It is (OD) tubing, to ensure a flat, even tubing cut. Learn how to properly use this cutter for your fluidic instrument set up.
Full story

Learn how to use the PEEK™ Bottom-of-the-Bottle™ Solvent Filter by IDEX Health & Science to filter solvents such as water or methanol.
Full story