Inline Check Valve

by IDEX Health & Science

inline check valve diagram

The IDEX Health & Science Inline Check Valve is designed to limit fluid or gas transfer to only one direction.

Instructions For Use

  1. Open the Check Valve Holder using the wrenches provided. Place the cartridge in the holder.
  2. Assemble the holder. Tighten the holder finger tight. Then, using the wrenches, tighten the holder an additional 1/8 of a turn.
  3. Connect your tubing to the Inline Check Valve Assembly using the fittings provided.

Please Note: For applications above 1,000 psi, we recommend using our high pressure stainless steel holder with the check valve cartridge.