High Pressure Semi-Prep Biocompatible Inline Filter

Instructions For Use

1. This filter is totally assembled and ready for use.
2. Use Fingertight fittings to connect tubing to both ends of this unit.
3. When replacing the frit in this unit, simply disconnect the tubing, unscrew one filter end fitting, remove the old frit, and place a new frit into the cavity of this end fitting.
4. Retighten the filter end fitting with a wrench, 1/4 turn past finger tight and then reconnect the tubing.

Please note: These units are designed to be used with plastic fittings only.