Tubing Sleeves
Because most capillary tubing connections are made into coned receiving ports, where the port is not designed to be used with capillary tubing directly, special care must be used to ensure a good connection. While custom ferrules can help make these connections, they only offer a fixed-length nose — and because most tubing pockets will vary slightly in length, this can lead to leaking or dead volume. Our Sleeves allow a capillary tubing connection is standard sized ports.
To help save overall expense while maintaining a concentric...
More Information >
Because most capillary tubing connections are made into coned receiving ports, where the port is...
More Information >
total selected
Clear selection
- Natural NanoTight FEP sleeve
- For use with 480-520µm OD tubing
- 0.021" / 535µm ID
- Compatible with F-333N fittings
- 1 piece per pack
- Red NanoTight FEP sleeve
- For use with 555-595µm OD tubing
- 0.024" / 610µm ID
- Compatible with F-333N fittings
- 1 piece per pack
- Yellow NanoTight FEP sleeve
- For use with 630-670µm OD tubing
- 0.027" / 685µm ID
- Compatible with F-333N fittings
- 1 piece per pack
- Green NanoTight FEP sleeve
- For use with 785-825µm OD tubing
- 0.033" / 840µm ID
- Compatible with F-333N fittings
- 1 piece per pack
1/16" OD NanoTight™ Sleeve - 1mm ID
F-252 / -
- Purple NanoTight FEP sleeve
- For use with 1mm OD tubing
- 0.0042" / 1.07mm ID
- Compatible with F-333N fittings
- 1 piece per pack
- Red PEEK tubing sleeves
- For use with 70-110µm OD tubing
- 0.005" / 125µm ID
- Compatible with F-140 and U-400 fittings
- 1 piece per pack
- Yellow PEEK tubing sleeves
- For use with 125-165µm OD tubing
- 0.007" / 180µm ID
- Compatible with F-140 and U-400 fittings
- 1 piece per pack
- Yellow PEEK tubing sleeves
- For use with 175-215µm OD tubing
- 0.009" / 230µm ID
- Compatible with F-140 and U-400 fittings
- 1 piece per pack
- Blue PEEK tubing sleeves
- For use with 225-265µm OD tubing
- 0.011" / 250µm ID
- Compatible with F-140 and U-400 fittings
- 1 piece per pack
- Natural PEEK tubing sleeves
- For use with 275-315µm OD tubing
- 0.013" / 330µm ID
- Compatible with F-140 and U-400 fittings
- 1 piece per pack
Tubing Sleeves
Because most capillary tubing connections are made into coned receiving ports, where the port is not designed to be used with capillary tubing directly, special care must be used to ensure a good connection. While custom ferrules can help make these connections, they only offer a fixed-length nose — and because most tubing pockets will vary slightly in length, this can lead to leaking or dead volume. Our Sleeves allow a capillary tubing connection is standard sized ports.
To help save overall expense while maintaining a concentric connection with minimal dead volume, IDEX Health & Science recommends the use of sleeves.