Tubing Sleeves
Because most capillary tubing connections are made into coned receiving ports, where the port is not designed to be used with capillary tubing directly, special care must be used to ensure a good connection. While custom ferrules can help make these connections, they only offer a fixed-length nose — and because most tubing pockets will vary slightly in length, this can lead to leaking or dead volume. Our Sleeves allow a capillary tubing connection is standard sized ports.
To help save overall expense while maintaining a concentric...
More Information >
Because most capillary tubing connections are made into coned receiving ports, where the port is...
More Information >
total selected
Clear selection
Kit Contains:
- 10-pack of each MicroTight Tubing Sleeve (F-180, F-181, F-182, F-183, F-184, F-185, F-186, and F-187)
- Qty 2 of P-770 MicroTight Adapters
- Qty 2 of MicroTight P-720 Unions
MicroTight® PEEK Sleeve Kit
1328 / -
MicroTight Tubing Sleeve Kit contains (6) each of the sleeve sizes
(Part Number/ ID/ For Tubing OD/ Color)
- F-180 125 μm (0.005”) 70–110 μm Red
- F-181 180 μm (0.007”) 125–165 μm Yellow
- F-182 230 μm (0.009”) 175–215 μm Natural
- F-183 280 μm (0.011”) 225–265 μm Blue
- F-184 330 μm (0.013”) 275–315 μm Orange
- F-185 395 μm (0.0155”) 340–380 μm Green
- F-186 455 μm (0.018”) 400–440 μm Black
- F-187 535 μm (0.021”) 480–520 μm Natural
- F-188 152 μm (0.006”) 95–135 μm Purple
- Yellow NanoTight FEP sleeve
- For use with 125-165µm OD tubing
- 0.007" / 180µm ID
- Compatible with F-333N fittings
- 1 piece per pack
- Natural NanoTight FEP sleeve
- For use with 160-200µm OD tubing
- 0.0085" / 215µm ID
- Compatible with F-333N fittings
- 1 piece per pack
- Blue NanoTight FEP sleeves
- For use with 225-265µm OD tubing
- 0.011" / 280µm ID
- Compatible with F-333N fittings
- 1 piece per pack
- Orange NanoTight FEP sleeve
- For use with 275-315µm OD tubing
- 0.013" / 330µm ID
- Compatible with F-333N fittings
- 1 piece per pack
1/16" OD NanoTight™ Sleeve - 330µm ID
F-241N / -
- Natural NanoTight FEP sleeve
- For use with 275-315µm OD tubing
- 0.013" / 330µm ID
- Compatible with F-333N fittings
- 1 piece per pack
- Green NanoTight FEP sleeve
- For use with 340-380µm OD tubing
- 0.0155" / 395µm ID
- Compatible with F-333N fittings
- 1 piece per pack
- Green NanoTight FEP sleeve
- For use with 340-380µm OD tubing
- 0.0155" / 395µm ID
- Compatible with F-333N fittings
- 10 pieces per pack
- Black NanoTight FEP sleeve
- For use with 400-440µm OD tubing
- 0.018" / 455µm ID
- Compatible with F-333N fittings
- 1 piece per pack
Tubing Sleeves
Because most capillary tubing connections are made into coned receiving ports, where the port is not designed to be used with capillary tubing directly, special care must be used to ensure a good connection. While custom ferrules can help make these connections, they only offer a fixed-length nose — and because most tubing pockets will vary slightly in length, this can lead to leaking or dead volume. Our Sleeves allow a capillary tubing connection is standard sized ports.
To help save overall expense while maintaining a concentric connection with minimal dead volume, IDEX Health & Science recommends the use of sleeves.