Tubing Sleeves
Because most capillary tubing connections are made into coned receiving ports, where the port is not designed to be used with capillary tubing directly, special care must be used to ensure a good connection. While custom ferrules can help make these connections, they only offer a fixed-length nose — and because most tubing pockets will vary slightly in length, this can lead to leaking or dead volume. Our Sleeves allow a capillary tubing connection is standard sized ports.
To help save overall expense while maintaining a concentric...
More Information >
Because most capillary tubing connections are made into coned receiving ports, where the port is...
More Information >
total selected
Clear selection
- Red NanoTight FEP sleeve
- For use with 70-110µm OD tubing
- 0.005" / 125µm ID
- Compatible with F-333N fittings
- 1 piece per pack
125μm MicroTight® Sleeve- Red
F-180 / -
- 125 μm (0.005”) OD sleeve
- For use with 70-110 μm tubing
- Red color PEEK
- 1 per pack
180μm MicroTight® Sleeve - Yellow
F-181 / -
- 180 μm (0.007”) OD sleeve
- For use with 125–165 μm tubing
- Yellow color PEEK
- 1 per pack
230μm MicroTight® Sleeve - Natural
F-182 / -
- 230μm (0.009”) OD sleeve
- For use with 175–215 μm tubing
- Natual color PEEK
- 1 per pack
280μm MicroTight® Sleeve - Blue
F-183 / -
- 280μm (0.011”) OD sleeve
- For use with 225–265 μm tubing
- Blue color PEEK
- 1 per pack
330μm MicroTight® Sleeve- Orange
F-184 / -
- 330 μm (0.013”) OD sleeve
- For use with 275 - 315 μm tubing
- Orange color PEEK
- 1 per pack
395μm MicroTight® Sleeve - Green
F-185 / -
- 395 μm (0.0155”) OD sleeve
- For use with 340 - 380 μm tubing
- Green color PEEK
- 1 per pack
- 395 μm (0.0155”) OD sleeve
- For use with 340 - 380 μm tubing
- Green color PEEK
- 10 per pack
455μm MicroTight® Sleeve- Black
F-186 / -
- 455 μm (0.018”) OD sleeve
- For use with 400–440 μm tubing
- Black color PEEK
- 1 per pack
535μm MicroTight® Sleeve - Natural
F-187 / -
- 535 μm (0.021”) OD sleeve
- For use with 480 - 520 μm tubing
- Natual color PEEK
- 1 per pack
Tubing Sleeves
Because most capillary tubing connections are made into coned receiving ports, where the port is not designed to be used with capillary tubing directly, special care must be used to ensure a good connection. While custom ferrules can help make these connections, they only offer a fixed-length nose — and because most tubing pockets will vary slightly in length, this can lead to leaking or dead volume. Our Sleeves allow a capillary tubing connection is standard sized ports.
To help save overall expense while maintaining a concentric connection with minimal dead volume, IDEX Health & Science recommends the use of sleeves.