LiteTouch Fittings
Our LiteTouch Fittings are specifically designed to effectively grip tubing at two compression points, holding to high pressures with Fingertight convenience. It also prevents polymer tubing from twisting, a potential problem when using standard Fingertight fittings. LiteTouch Fittings are available for use with 1/32”, 1/16”, or 1/8” OD tubing sizes, and for 10-32 or 1/4-28 coned ports.
To avoid collapsing the ID of your tubing, the LiteTouch system can be used on hard tubing only, such as stainless steel and PEEK polymer tubing. The...
More Information >
Our LiteTouch Fittings are specifically designed to effectively grip tubing at two compression...
More Information >
total selected
Clear selection
1/16" OD LiteTouch® SST FlushNut™
F-354 / -
- 10-32 coned port
- Compatible with 1/16" OD tubing
- Headless flush nut for low clearance applications
- Stainless steel
- 1 per pack
1/8" OD LiteTouch® SST FlushNut™
F-364 / -
- 1/4-28 coned port
- Compatible with 1/8" OD tubing
- Headless flush nut for low clearance applications
- Stainless steel
- 1 per pack
1/16" OD LiteTouch® Ferrule (1/pk)
LT-100 / -
- 10-32 Coned
- Grips tubing at two compression points to hold higher pressures than standard fingertight fittings
- For use only on hard wall tubing (SST or PEEK)
- Not recommended for repeat use in polymer ports
- Compatible with LT-110x or F-354 nuts
- 1 per pack
1/16" OD LiteTouch® Ferrule (10/pk)
LT-100X / -
- 10-32 Coned
- Grips tubing at two compression points to hold higher pressures than standard fingertight fittings
- For use only on hard wall tubing (SST or PEEK)
- Not recommended for repeat use in polymer ports
- Compatible with LT-110x or F-354 nuts
- 10 per pack
1/16" OD LiteTouch® PEEK Nut (1/pk)
LT-110 / -
- 10-32 coned
- Compatible with 1/16" or 1/32" OD tubing
- Standard Knurl head style
- PEEK material
- Compatible with LT-100, LT-132, and LT-135 ferrules
- 1 per pack
1/16" OD LiteTouch® PEEK Nut (10/pk)
LT-110X / -
- 10-32 coned
- Compatible with 1/16" or 1/32" OD tubing
- Standard Knurl head style
- PEEK material
- Compatible with LT-100, LT-132, and LT-135 ferrules
- 10 per pack
1/32" OD LiteTouch® Micro Ferrule
LT-132 / -
- 10-32 Coned
- Grips tubing at two compression points to hold higher pressures than standard fingertight fittings
- For use only on hard wall tubing (SST or PEEK)
- Not recommended for repeat use in polymer ports
- Compatible with LT-110x or F-354 nuts
- 1 per pack
1/16" OD LiteTouch® SealTight™ Ferrule
LT-135 / -
- 10-32 Coned
- Grips tubing at two compression points to hold pressure up to 10,000 psi (689 bar) with a SST 10-32 nut
- For use only on hard wall tubing (SST or PEEK)
- Not recommended for repeat use in polymer ports
- Compatible with LT-110x, F-354 nuts and U-400 for high pressure
- 1 per pack
1/8" OD LiteTouch® Ferrule
LT-200 / -
- 1/4-28 Coned
- Grips tubing at two compression points to hold higher pressures than standard fingertight fittings
- For use only on hard wall tubing (SST or PEEK)
- Not recommended for repeat use in polymer ports
- Compatible with LT-210 or LT-215 nuts
- 1 per pack
1/8" OD LiteTouch® Short Nut, Natural
LT-215 / -
- 1/4-28 coned port
- Compatible with 1/8" OD tubing
- Shorter length for tight spaces
- Standard Knurl head
- Use with LT-200 ferrule
- Natural PEEK color
- 1 per pack
LiteTouch Fittings
Our LiteTouch Fittings are specifically designed to effectively grip tubing at two compression points, holding to high pressures with Fingertight convenience. It also prevents polymer tubing from twisting, a potential problem when using standard Fingertight fittings. LiteTouch Fittings are available for use with 1/32”, 1/16”, or 1/8” OD tubing sizes, and for 10-32 or 1/4-28 coned ports.
To avoid collapsing the ID of your tubing, the LiteTouch system can be used on hard tubing only, such as stainless steel and PEEK polymer tubing. The LiteTouch Ferrule System is not recommended for repeated use in plastic ports.