Coned Fittings
Our Coned Fittings offer enhanced pressure holding abilities for demanding fluidic applications such as HPLC. Most of our Coned Fittings have been engineered to work in the high pressure zone of chromatography systems – the region between the outlet of the pump and the inlet of the column – where the physical stresses on the hplc fittings are generally high, with inline pressures reaching 6,000 psi or higher and in UHPLC applications pressures can reach up to 20000psi or higher.
Our Coned Fittings offer enhanced pressure holding abilities for demanding fluidic applications...
More Information >
total selected
Clear selection
1/8" OD LiteTouch® Ferrule
LT-200 / -
- 1/4-28 Coned
- Grips tubing at two compression points to hold higher pressures than standard fingertight fittings
- For use only on hard wall tubing (SST or PEEK)
- Not recommended for repeat use in polymer ports
- Compatible with LT-210 or LT-215 nuts
- 1 per pack
1/16" OD Fingertight Fitting Long
F-130 / -
- For 1/16" OD tubing mating with a 10-32 Coned Port
- One piece natural PEEK fitting
- Longer length fitting for easy accessibility
- Recommended for pressures up 5000 psi (345 bar)
- Can be used with extender tools
- 1 piece per pack
- Male Nut, 1/4" Hex head
- 316 Stainless Steel
- For use with 1/16" OD tubing
- 20,000 psi (1380 bar) pressure rating
- Compatible with U-401 ferrule
- 1 nut per pack
1/16"OD Fingertight Ferrule ETFE (1/pk)
F-142N / -
- 10-32 Coned
- For 1/16" OD tubing
- ETFE Material
- For use with two piece fingertight fittings
- 1 per pack
- 6-32 Coned
- For 1/32" OD tubing
- Red PEEK standard micro knurl fingertight fitting
- 10 per pack
- For 1/16" OD tubing mating with a 10-32 Coned Port
- One piece natural PEEK fitting
- Longer length fitting for easy accessibility
- Recommended for pressures up 5000 psi (345 bar)
- Can be used with extender tools
- 10 pieces per pack
1/16" OD MicroTight® Ferrule
F-132 / -
- 5/16-24 Coned MicroFerrule
- Specifically made for 1/16” OD tubing
- Compatible with P-416 nut
- 1 per pack
- Male Nut, 1/4" Hex head
- 316 Stainless Steel
- For use with 1/16" OD tubing
- 20,000 psi (1380 bar) pressure rating
- Compatible with U-401x ferrules
- 10 nuts per pack
1/16"OD Fingertight Ferrule ETFE (10/pk)
F-142NX / -
- 10-32 Coned
- For 1/16" OD tubing
- ETFE Material
- For use with two piece fingertight fittings
- 10 per pack
1/8" OD LiteTouch® Short Nut, Natural
LT-215 / -
- 1/4-28 coned port
- Compatible with 1/8" OD tubing
- Shorter length for tight spaces
- Standard Knurl head
- Use with LT-200 ferrule
- Natural PEEK color
- 1 per pack
Coned Fittings
Our Coned Fittings offer enhanced pressure holding abilities for demanding fluidic applications such as HPLC. Most of our Coned Fittings have been engineered to work in the high pressure zone of chromatography systems – the region between the outlet of the pump and the inlet of the column – where the physical stresses on the hplc fittings are generally high, with inline pressures reaching 6,000 psi or higher and in UHPLC applications pressures can reach up to 20000psi or higher.