Coned Fittings
Our Coned Fittings offer enhanced pressure holding abilities for demanding fluidic applications such as HPLC. Most of our Coned Fittings have been engineered to work in the high pressure zone of chromatography systems – the region between the outlet of the pump and the inlet of the column – where the physical stresses on the hplc fittings are generally high, with inline pressures reaching 6,000 psi or higher and in UHPLC applications pressures can reach up to 20000psi or higher.
Our Coned Fittings offer enhanced pressure holding abilities for demanding fluidic applications...
More Information >
total selected
Clear selection
1/32" OD LiteTouch® Micro Ferrule
LT-132 / -
- 10-32 Coned
- Grips tubing at two compression points to hold higher pressures than standard fingertight fittings
- For use only on hard wall tubing (SST or PEEK)
- Not recommended for repeat use in polymer ports
- Compatible with LT-110x or F-354 nuts
- 1 per pack
1/16" OD Fingertight Ferrule PEEK
F-142 / -
- 10-32 coned
- For 1/16" OD tubing
- Natural PEEK
- For use with two piece fingertight fittings
- Compatible wtih F-200, F-300, F-330, F-331, F-140 nuts
- 1 per pack
1/16" OD Fingertight Fitting (10/pk)
F-120X / -
- For 1/16" OD tubing mating with a 10-32 Coned Port
- One piece natural PEEK fitting
- Recommended for pressures up 5000 psi (345 bar)
- Can be used with extender tools
- 10 pieces per pack
1/16" OD LiteTouch® SealTight™ Ferrule
LT-135 / -
- 10-32 Coned
- Grips tubing at two compression points to hold pressure up to 10,000 psi (689 bar) with a SST 10-32 nut
- For use only on hard wall tubing (SST or PEEK)
- Not recommended for repeat use in polymer ports
- Compatible with LT-110x, F-354 nuts and U-400 for high pressure
- 1 per pack
- 10-32 Coned
- 316 Stainless Steel
- For use with 1/16" OD tubing
- Compatible with U-320X nuts
- 10 ferrules per pack
- 6-32 Coned
- For 1/32" OD tubing
- Red PEEK Headless Fingertight fitting for use in space restricted ports
- 1 per pack
- 10-32 coned
- For 1/16" OD tubing
- Natural PEEK
- For use with two piece fingertight fittings
- Compatible wtih F-200, F-300, F-330, F-331, F-140 nuts
- 10 per pack
1/16" OD Fingertight Fittings
F-120Y / -
- For 1/16" OD tubing mating with a 10-32 Coned Port
- One piece yellow PEEK fitting
- Recommended for pressures up 5000 psi (345 bar)
- Can be used with extender tools
- 1 piece per pack
- Male Nut, 5/16" Hex head, 10-32 coned
- 316 Stainless Steel
- For use with 1/16" OD tubing
- 20,000 psi (1380 bar) pressure rating
- Compatible with U-351 ferrules
- 1 nut per pack
- 6-32 Coned
- For 1/32" OD tubing
- Red PEEK standard micro knurl fingertight fitting
- 1 per pack
Coned Fittings
Our Coned Fittings offer enhanced pressure holding abilities for demanding fluidic applications such as HPLC. Most of our Coned Fittings have been engineered to work in the high pressure zone of chromatography systems – the region between the outlet of the pump and the inlet of the column – where the physical stresses on the hplc fittings are generally high, with inline pressures reaching 6,000 psi or higher and in UHPLC applications pressures can reach up to 20000psi or higher.