Coned Fittings
Our Coned Fittings offer enhanced pressure holding abilities for demanding fluidic applications such as HPLC. Most of our Coned Fittings have been engineered to work in the high pressure zone of chromatography systems – the region between the outlet of the pump and the inlet of the column – where the physical stresses on the hplc fittings are generally high, with inline pressures reaching 6,000 psi or higher and in UHPLC applications pressures can reach up to 20000psi or higher.
Our Coned Fittings offer enhanced pressure holding abilities for demanding fluidic applications...
More Information >
total selected
Clear selection
1/16" OD LiteTouch Nut, VHP
PK-110X / -
- Compatible with 1/16" or smaller OD tubing mating with a 10-32 threaded port
- PK material
- Recommended for pressures up to 16500 psi (1140 bar)
- Can be used with standard knurl head extender tools
- 10 pieces per pack
1/16" OD LiteTouch® SST FlushNut™
F-354 / -
- 10-32 coned port
- Compatible with 1/16" OD tubing
- Headless flush nut for low clearance applications
- Stainless steel
- 1 per pack
1/16" OD SealTight™ Ferrule
F-192 / -
- 10-32 Coned
- Dual cone design for optimal sealing performance
- Use with hard wall tubing
- For use with F-193, F-195, F-196 nuts
- 1 piece per pack
1/32" OD Fitting, VHP
VHP-900 / -
- For 1/32" OD tubing mating with an M4 coned port
- Stainless steel nut and ferrule
- Recommended for pressures up to 30,000 psi (2070 bar)
- 4mm Hex Head
- 1 per pack
1/32" OD MicroFerrule
F-112 / -
- 5/16-24 Coned MicroFerrule
- Specifically made for 1/32” OD tubing
- Can be used with MicroTight Tubing Sleeves
- Compatible with P-416 nut
- 1 per pack
1/32" OD MicroTight fitting, VHP
PK-126H / -
- For 1/32" OD tubing mating with a 6-32 coned port
- PK Material
- Recommended for pressures up to 15000 psi (1035 bar)
- Compatible with headless micro knurl extender tools
- 1 piece per pack
1/32" OD MicroTight fitting, VHP
PK-126 / -
- For 1/32" OD tubing mating with a 6-32 coned port
- PK Material
- Recommended for pressures up to 15000 psi (1035 bar)
- Compatible with standard micro knurl extender tools
- 1 piece per pack
1/32" OD PK LiteTouch Ferrule, VHP
PK-132 / -
- For use with 1/32" OD tubing in a 10-32 Coned port
- Grips tubing at two compression points to hold higher pressures
- For use on hard wall tubing (SST or PEEK)
- Recommended for pressures up to 16500 psi (1140 bar)
- 1 per pack
1/32" OD PK MicroFerrule
PK-112 / -
- 5/16-24 Coned MicroFerrule
- For 0.031" (1/32") OD tubing
- Black PEEK ferrule
- Compatible with P-416 series female nut
- 1 per pack
1/8" OD SST Nut (1/pk)
C-235 / -
- 1/4-28 Coned, 5/16" hex head
- 316 Stainless Steel
- For use with 1/8" OD tubing
- 20,000 psi (1380 bar) pressure rating
- Compatible with U-236 nuts
- 1 nut per pack
Coned Fittings
Our Coned Fittings offer enhanced pressure holding abilities for demanding fluidic applications such as HPLC. Most of our Coned Fittings have been engineered to work in the high pressure zone of chromatography systems – the region between the outlet of the pump and the inlet of the column – where the physical stresses on the hplc fittings are generally high, with inline pressures reaching 6,000 psi or higher and in UHPLC applications pressures can reach up to 20000psi or higher.