Coned Fittings
Our Coned Fittings offer enhanced pressure holding abilities for demanding fluidic applications such as HPLC. Most of our Coned Fittings have been engineered to work in the high pressure zone of chromatography systems – the region between the outlet of the pump and the inlet of the column – where the physical stresses on the hplc fittings are generally high, with inline pressures reaching 6,000 psi or higher and in UHPLC applications pressures can reach up to 20000psi or higher.
Our Coned Fittings offer enhanced pressure holding abilities for demanding fluidic applications...
More Information >
total selected
Clear selection
1/16" OD Fingertight fitting, VHP
PK-120BLKX / -
- For 1/16" OD tubing mating with a 10-32 coned port
- PK Material
- Recommended for pressures up to 12000 psi (827 bar)
- Compatible with standard knurl extender tools
- 10 pieces per pack
1/16" OD Fingertight fitting, VHP
PK-120BLK / -
- For 1/16" OD tubing mating with a 10-32 coned port
- PK Material
- Recommended for pressures up to 12000 psi (827 bar)
- Compatible with standard knurl extender tools
- 1 piece per pack
1/16" OD Fitting, VHP
VHP-326 / -
- For 1/16" OD tubing mating with a 10-32 coned port
- Reusable and long length for accessibility
- Stainless steel fitting with black PEEK ferrule
- Recommended for pressures up to 25000 psi (1720 bar)
- 8mm hex head
- 1 piece per pack
1/16" OD Fitting, VHP
VHP-321 / -
- For 1/16" OD tubing mating with a 10-32 coned port
- 8mm hex head
- Stainless steel nut with Black PEEK ferrule
- Recommended for pressures up to 25,000 psi (1725 bar)
- 1 piece per pack
1/16" OD Fitting, VHP
VHP-320 / -
- For 1/16" OD tubing mating with a 10-32 coned port
- Reusable
- Stainless steel nut with a black PEEK ferrule
- Recommended for pressures up to 25000 psi (1725 bar)
- 1/4" hex head
- 1 piece per pack
1/16" OD Fitting, VHP
VHP-200 / -
- For 1/16" OD tubing mating with a 10-32 coned port
- Stainless Steel
- Recommended for pressures up to 30000 psi (2070 bar)
- 1/4" Hex Head
- 1 piece per pack
1/16" OD Fitting, VHP
VHP-325 / -
- For 1/16" OD tubing mating with a 10-32 coned port
- Long length for accessability
- Stainless steel fitting with black PEEK ferrule
- Recommended for pressures up to 25000 psi (1720 bar)
- 5/16" hex head
- 1 piece per pack
1/16" OD Fitting, VHP
VHP-205 / -
- For 1/16" OD tubing mating with a 10-32 coned port
- Long length for accessibility
- Stainless Steel
- Recommended for pressures up to 30000 psi (2070 bar)
- 1/4" Hex Head
- 1 piece per pack
1/16" OD Fitting, VHP Fingertight
VHP-3200 / -
- For 1/16" OD tubing mating with a 10-32 coned port
- 0.50" knurled head for ease of use
- Stainless steel nut with black PEEK ferrule
- pressures up to 11,000 psi hand tight
- pressures up to 25,000 psi when wrench tight
- 1 per pack
1/16" OD LiteTouch Ferrule, VHP
PK-100X / -
- For 1/16" OD tubing mating to a 10-32 coned port
- PK Material
- Grips tubing at two compression points to hold higher pressures
- Recommended for pressures up to 16500 psi (1140 bar)
- For use with 10-32 threaded fittings
- 10 per pack
Coned Fittings
Our Coned Fittings offer enhanced pressure holding abilities for demanding fluidic applications such as HPLC. Most of our Coned Fittings have been engineered to work in the high pressure zone of chromatography systems – the region between the outlet of the pump and the inlet of the column – where the physical stresses on the hplc fittings are generally high, with inline pressures reaching 6,000 psi or higher and in UHPLC applications pressures can reach up to 20000psi or higher.