Bottom-of-the-bottle Filters
Our uniquely designed Bottom-of-the-Bottle Filters effectively protect your system by filtering out particulate matter that my otherwise damage expensive hardware.
Our durable stainless steel specifically designed to allow solvents to be drawn from within 1/8” of the bottom of your bottle.
Our UHMWPE version allows tubing to pass through to the bottom of the filter cup, enabling the filter to draw solvent from within 0.10” (2.5 mm) of the bottom of your solvent bottle. This widely known and durable polymer is an economical choice.
Our...
More Information >
Our uniquely designed Bottom-of-the-Bottle Filters effectively protect your system by filtering out...
More Information >
total selected
Clear selection
Filter Cup, Bottom-of-the-Bottle
A-427 / -
- Natural UHMWPE biocompatible material
- 10µm filtration rating
- Replacement solvent filter cups
- 5 per pack
Inlet Filter, Bottom-of-the Bottle
A-309 / -
- Stainless steel filter material
- 10µm filtration rating
- Stainless steel filter cap
- For use with 1/16" ID soft walled tubing
- Internal stem draws from bottom of filter
Inlet Filter, Bottom-of-the Bottle
A-437 / -
- PEEK filter material
- 2µm filtration rating
- All PEEK construction
- For use with 1/8" OD tubing
- Fits GL-38 and GL-45 bottles
Inlet Filter, Bottom-of-the Bottle
A-438 / -
- PEEK filter material
- 10µm filtration rating
- All PEEK construction
- For use with 1/8" OD tubing
- Fits GL-38 and GL-45 bottles
Inlet Filter, Bottom-of-the-Bottle
A-445 / -
- Natural UHMWPE filter material
- 10µm filtration rating
- Natural ETFE cap
- 1/4-28 flat-bottom port for 1/16" OD tubing
- Includes P-245 and P-200 flangeless fittings
- Ø.076 thru hole allows tube to pass to bottom of filter
Inlet Filter, Bottom-of-the-Bottle
A-446 / -
- Natural UHMWPE filter material
- 10µm filtration rating
- Natural ETFE cap
- 1/4-28 flat-bottom port for 1/8" OD tubing
- Includes P-345 and P-300 flangeless fittings
Inlet Filter, Bottom-of-the-Bottle
A-550 / -
- Stainless steel filter material
- 10µm filtration rating
- Natural PEEK cap
- 5/16-24 flat-bottom port for 1/8" OD tubing
- Includes P-130 and P-300 flangeless fittings
Inlet Filter, Bottom-of-the-Bottle
A-551 / -
- Stainless steel filter material
- 2µm filtration rating
- Natural PEEK cap
- 5/16-24 flat-bottom port for 1/8" OD tubing
- Includes P-130 and P-300 flangeless fittings
1 of 1
Bottom-of-the-bottle Filters
Our uniquely designed Bottom-of-the-Bottle Filters effectively protect your system by filtering out particulate matter that my otherwise damage expensive hardware.
Our durable stainless steel specifically designed to allow solvents to be drawn from within 1/8” of the bottom of your bottle.
Our UHMWPE version allows tubing to pass through to the bottom of the filter cup, enabling the filter to draw solvent from within 0.10” (2.5 mm) of the bottom of your solvent bottle. This widely known and durable polymer is an economical choice.
Our PEEK version is biocompatible and includes two built-in PEEK frits. Our PEEK frit (2 μm or 10 μm) will draw solvents from within 0.080” (2.0 mm) of the bottom of the solvent bottle. The 2μm frit on the side may be used for a 1/8” OD helium sparging line.