Filters
Our Filters offer an optimal way to filter your solvents, preventing pump cavitation and system damage. We offer different style filters for specific system specifications. Our filters protect your system from particulate matter from the solvent that may otherwise damage expensive hardware. It is good practice to filter your solvents to prevent pump damage Filters provide that protection. Because filters should be changed periodically, we make it easy to replace them without tools. For those filters using a plastic fitting, the tubing can be...
More Information >
Our Filters offer an optimal way to filter your solvents, preventing pump cavitation and system...
More Information >
total selected
Clear selection
Filter Assembly End Fitting
A-429X / -
- PEEK filter and body material
- 2µm filtration rating
- 10-32 coned port for 1/16" OD tubing
- Rated for up to 6000-psi
- For use in the A-430 filter assembly
- 10 per pack
Filter Assembly End Fitting
A-428X / -
- PEEK filter and body material
- 0.5µm filtration rating
- 10-32 coned port for 1/16" OD tubing
- Rated for up to 6000-psi
- For use in the A-431 filter assembly
- 10 per pack
- PEEK filter material
- 10µm filtration rating
- PEEK body material
- 10-32 coned port for 1/16" OD tubing
- Rated for up to 6000-psi
- PEEK filter material
- 2µm filtration rating
- PEEK body material
- 10-32 coned port for 1/16" OD tubing
- Rated for up to 6000-psi
Filter Assembly, Inline
A-313 / -
- Stainless Steel filter material
- 20µm filtration rating
- Stainless Steel body material
- 10-32 coned port for 1/16" OD tubing
- Rated for up to 6000-psi
Filter Assembly, Inline
A-416 / -
- Stainless Steel filter material
- 2µm filtration rating
- Polypropylene body
- 1/4-28 flat-bottom port for 1/8" OD tubing
- Includes P-320 and P-300 flangeless fittings
Filter Assembly, Inline
A-431 / -
- PEEK filter material
- 0.5µm filtration rating
- All PEEK wetted path
- 10-32 coned port for use with 1/8" OD tubing
- Rated for up to 6000-psi
Filter Assembly, Inline
A-415 / -
- Stainless Steel filter material
- 2µm filtration rating
- Polypropylene body
- 1/4-28 flat-bottom port for 1/16" OD tubing
- Includes P-220 and P-200 flangeless fittings
Filter Assembly, Inline
A-430 / -
- PEEK filter material
- 2µm filtration rating
- All PEEK wetted path
- 10-32 coned port for use with 1/8" OD tubing
- Rated for up to 6000-psi
Filter Assembly, Precolumn
A-356 / -
- PEEK filter material
- 0.5µm filtration rating
- All PEEK wetted path
- 10-32 coned port for use with 1/16" OD tubing
- Rated for up to 6000-psi
Filters
Our Filters offer an optimal way to filter your solvents, preventing pump cavitation and system damage. We offer different style filters for specific system specifications. Our filters protect your system from particulate matter from the solvent that may otherwise damage expensive hardware. It is good practice to filter your solvents to prevent pump damage Filters provide that protection. Because filters should be changed periodically, we make it easy to replace them without tools. For those filters using a plastic fitting, the tubing can be reconnected by finger tightening the fitting into the new filter. The filters with stems allow easy insertion into the inlet tubing.