1535/3 nm single-band bandpass filter

Semrock Part Number: NIR01-1535/3-25

IDEX Part Number: FL-007692 /

Optical Specifications	Value
Transmission Band 1	Tabs > 90% 1533.5 – 1536.5 nm
Blocking Band 1	ODavg > 5 850 – 1519.6 nm
Blocking Band 2	ODavg > 6 1412.1 – 1511.9 nm
Blocking Band 3	ODavg > 6 1558 – 1688.5 nm
Blocking Band 4	ODavg > 5 1550.4 – 1750 nm
Center Wavelength 1	1535 nm
Guaranteed Minimum Bandwidth 1	3 nm
FWHM Bandwidth 1 (nominal)	8.6 nm
General Filter Specifications	Value
Angle of Incidence	0 ± 2 degrees
Optical Damage Rating	1 J/cm². at 1570 nm (10 ns pulse width)
Physical Filter Specifications	Value
Transverse Dimensions (Diameter)	25 mm
Transverse Tolerance (mounted)	+ 0.0 / – 0.1 mm
Filter Thickness (Mounted)	3.5 mm
Filter Thickness Tolerance (Mounted)	± 0.1 mm
Clear Aperture	≥ 22 mm
Scratch-Dig	60-40
Substrate Thickness (unmounted)	2.0 mm
Substrate Thickness Tolerance (unmounted)	± 0.1 mm
Orientation	Arrow on ring indicates preferred direction of propagation of light

Available on

BLP01-1550R-25

FL-008532 / 0

1 of 1

Page Size

Topic	Description
Cleaning Optical Filters	Instructions for cleaning hard coated optical filters
Filter Reliability	Compares the performance and reliability of hard coated filters to traditional soft-coated filters and provides information about the testing standards for Semrock filters
Working with Optical Density	Tables to describe the relationship between OD and transmission with tips for quickly calculating OD

Optical Specifications: Value
Transmission Band 1: Tabs > 90% 1533.5 – 1536.5 nm
Blocking Band 1: ODavg > 5 850 – 1519.6 nm
Blocking Band 2: ODavg > 6 1412.1 – 1511.9 nm
Blocking Band 3: ODavg > 6 1558 – 1688.5 nm
Blocking Band 4: ODavg > 5 1550.4 – 1750 nm
Center Wavelength 1: 1535 nm
Guaranteed Minimum Bandwidth 1: 3 nm
FWHM Bandwidth 1 (nominal): 8.6 nm
General Filter Specifications: Value
Angle of Incidence: 0 ± 2 degrees
Optical Damage Rating: 1 J/cm². at 1570 nm (10 ns pulse width)
Physical Filter Specifications: Value
Transverse Dimensions (Diameter): 25 mm
Transverse Tolerance (mounted): + 0.0 / – 0.1 mm
Filter Thickness (Mounted): 3.5 mm
Filter Thickness Tolerance (Mounted): ± 0.1 mm
Clear Aperture: ≥ 22 mm
Scratch-Dig: 60-40
Substrate Thickness (unmounted): 2.0 mm
Substrate Thickness Tolerance (unmounted): ± 0.1 mm
Orientation: Arrow on ring indicates preferred direction of propagation of light

Topic	Description
Cleaning Optical Filters	Instructions for cleaning hard coated optical filters
Filter Reliability	Compares the performance and reliability of hard coated filters to traditional soft-coated filters and provides information about the testing standards for Semrock filters
Working with Optical Density	Tables to describe the relationship between OD and transmission with tips for quickly calculating OD