1040 nm StopLine® notch laser dichroic beamsplitter for CARS & SRS

Semrock Part Number: NFD01-1040-25x36

IDEX Part Number: FL-009359  /

Semrock
Each dichroic beamsplitter reflects a standard laser line incident at 45° while efficiently passing the shorter & longer wavelengths. This laser dichroic beamsplitter is optimized for reflecting laser beams up to 2.5 mm in diameter while minimizing RWE.
Optimized to reflect 1040 nm secondary laser on Coherent® Chameleon Discovery and 1041 nm secondary laser Spectra-Physics InSight® DS+™ Ti-Sapphire lasers.
  • Price Not Available.
  • Each
  • Price Not Available.
  • 765.00 USD Each
  • 0.00
    0.00
  • Notify me when available
Optical Specifications Value
Transmission Band 1 Tavg > 90% 350 – 992 nm
Transmission Band 2 Tavg > 90% 1114 – 1600 nm
Reflection Band 1 Rabs > 98% 1040 nm
Laser Wavelength 1 1040 nm
Notch Bandwidth 1 118 nm (typical)
General Filter Specifications Value
Angle of Incidence 45 ± 1 degrees
Cone Half-angle 2 degrees
Optical Damage Rating 1 J/cm² @ 532 nm (10 ns pulse width)
Reflected Wavefront Error < 6λ P-V RWE @ 632.8 nm
Flatness / RWE Classification   Laser
Physical Filter Specifications   Value
Transverse Dimensions (L x W) 25.2 mm x 35.6 mm
Transverse Tolerance ± 0.1 mm
Substrate Type Fused Silica
Filter Thickness (unmounted) 1.05 mm
Filter Thickness Tolerance (unmounted) ± 0.05 mm
Clear Aperture ≥ 80% (elliptical)
Scratch-Dig 60-40
Substrate Thickness (unmounted) 1.05 mm
Substrate Thickness Tolerance (unmounted) ± 0.05 mm
Orientation Reflective surface marked with part number - Orient in direction of incoming light
TopicDescription
Cleaning Optical FiltersInstructions for cleaning hard coated optical filters
Cube Assembly InstructionsPDF and video instruction for installing filters into popular filter cubes
Filter ReliabilityCompares the performance and reliability of hard coated filters to traditional soft-coated filters and provides information about the testing standards for Semrock filters
Flatness of Dichroic BeamsplittersDescribes the impact of non-flat dichroic beamsplitters on microscope image fidelity
Measuring Light with Wavelengths & WavenumbersCompares units of wavelength to wavenumbers and provides formulas for calculating wavenumber shift
Measurement of Optical FiltersDescribes the problems encountered when measuring optical filter spectra with commercially available spectrophotometers
Laser Damage ThresholdProvides information for calculating laser damage threshold for pulsed and continuous wave lasers
Tunable Bandpass FiltersCompares the spectral response of tunable bandpass filters to traditional filter spectra at non-normal angles of incidence

Specifications

TopicDescription
Cleaning Optical FiltersInstructions for cleaning hard coated optical filters
Cube Assembly InstructionsPDF and video instruction for installing filters into popular filter cubes
Filter ReliabilityCompares the performance and reliability of hard coated filters to traditional soft-coated filters and provides information about the testing standards for Semrock filters
Flatness of Dichroic BeamsplittersDescribes the impact of non-flat dichroic beamsplitters on microscope image fidelity
Measuring Light with Wavelengths & WavenumbersCompares units of wavelength to wavenumbers and provides formulas for calculating wavenumber shift
Measurement of Optical FiltersDescribes the problems encountered when measuring optical filter spectra with commercially available spectrophotometers
Laser Damage ThresholdProvides information for calculating laser damage threshold for pulsed and continuous wave lasers
Tunable Bandpass FiltersCompares the spectral response of tunable bandpass filters to traditional filter spectra at non-normal angles of incidence