No direct substitute. For Fluidics, contact Technical Support at IHSTechSupport@idexcorp.com // For Optical Filters, contact semrock@idexcorp.com
This full-multiband set is optimized for laser excitation utilizing a 375 or 405 nm laser source for DAPI, a 473 or 488 nm laser source for GFP or FITC, and a 593.5, 594.0 or 594.1 nm laser source for mCherry. This set provides high brightness, extremely low crosstalk, and superb signal-to-noise ratio.
Price Not Available.
Each
US Domestic pricing – contact your local distributor for other currency list prices
Price Not Available.
0.00
USD
Each
US Domestic pricing – contact your local distributor for other currency list prices
This set is mounted in a ZEISS Microscopy FL CUBE EC P&C Fluorescence Filter Holder, which is compatible with Axio Imager, Axiostar Plus, Axioskop 40, Axioskop 2 (post-2001), Axioplan 2i, Axioplan 2ie, Axiovert 200, Axiovert 40, Axio Observer, Axio Examiner, and Axio Scope A1, from ZEISS Microscopy.
Filter Role
Filter Size
Maximum Thickness
Exciter (Diameter)
25.0 mm
5.0 mm
Emitter (Diameter)
25.0 mm
5.0 mm
Dichroic (L × W)
25.2 mm × 35.6 mm
1.1 mm
Optimized – Filter set is specifically optimized for that fluorophore.
Compatible – Should result in nearly ideal performance in most situations.
Acceptable – Actual performance is dependent on specific experimental conditions.
Compares the performance and reliability of hard coated filters to traditional soft-coated filters and provides information about the testing standards for Semrock filters
This set is mounted in a ZEISS Microscopy FL CUBE EC P&C Fluorescence Filter Holder, which is compatible with Axio Imager, Axiostar Plus, Axioskop 40, Axioskop 2 (post-2001), Axioplan 2i, Axioplan 2ie, Axiovert 200, Axiovert 40, Axio Observer, Axio Examiner, and Axio Scope A1, from ZEISS Microscopy.
Compares the performance and reliability of hard coated filters to traditional soft-coated filters and provides information about the testing standards for Semrock filters