Semrock’s LED-based light engine filter sets are designed to use common excitation filters between single-band and corresponding multiband configurations to simplify interchangeability when installing the excitation filters into the light engine. This not only provides seamless transition between using single-band and multiband filter sets but also provides significant cost savings.
This filter set is optimized to simultaneously deliver bright signal and high signal-to-noise ratio (contrast) for measuring YFP (or other key fluorophores – see complete list above). This set is spectrally aligned for excitation with many of the broadband or discrete LED-based light engines available in the market.
Interested in learning how this filter set will perform with your light source? Try Semrock's SearchLight plotting & calculation tool.
-
EachUS Domestic pricing – contact your local distributor for other currency list prices
-
1,130.00 USD EachUS Domestic pricing – contact your local distributor for other currency list prices
-
-
0.000.00 -
-
- Notify me when available
Filter set mounted in microscope holders/cubes found below in related products section.
Set Components
FF01-509/22-25FL-004258
Each
|
FL-004258 |
|
FF01-544/24-25FL-004684
Each
|
FL-004684 |
|
FF526-Di01-25x36FL-007012
Each
|
FL-007012 |
total selected
Clear selection
Select all 13 products from all pages.
LED-YFP-A-U03
S-001130 / 0
This set is delivered unmounted and fits Olympus OFF cubes which is compatible with the BX3 (BX53, BX63) and IX3 Series (IX53, IX73, IX83) of Evident Scientific (Olympus) microscopes.
LED-YFP-A-NQF
S-000420 / 0
This set is delivered mounted in microscope filter holder, often called 'cube', ready for your microscope.
Nikon Quadfluor for microscopes: E200, E400, E600, E800, E1000, TS100, TS100F, TE200, TE300, ME600L, L150A, and some Labophot, Optiphot, and Diaphot series
LED-YFP-A-NTE
S-000421 / 0
This set is delivered mounted in microscope filter holder, often called 'cube', ready for your microscope.
Nikon TE 2000 for microscopes: TE 2000, 50i, 55i, 80i, 90i, Eclipse Ti, Ni, and Ci series, and any using the Epi-fluor Illuminator
LED-YFP-A-OMF
S-000424 / 0
This set is delivered mounted in microscope filter holder, often called 'cube', ready for your microscope.
Olympus U-MF2 for microscopes: AX70, BX, BX41, BX50, BX51, BX60, BX61, BX50/51WI, BX60/61WI, IX50, IX51, IX70, IX71, IX81
LED-YFP-A-ZHE
S-000426 / 0
This set is delivered mounted in microscope filter holder, often called 'cube', ready for your microscope.
Zeiss FL Cube EC P+C for microscopes: Axio Imager, Axiostar Plus, Axioskop 40, Axioskop 2 (post-2001), Axioplan 2i, Axioplan 2ie, Axiovert 200, Axiovert 40, Axio Observer, Axio Examiner and Axio Scope A1
LED-YFP-A-OFF
S-000423 / 0
This set is delivered mounted in microscope filter holder, often called 'cube', ready for your microscope.
Olympus U-FF for microscopes: BX53, BX63
LED-YFP-A-NQF-ZERO
S-001705 / 0
This set is delivered mounted in microscope filter holder, often called 'cube', ready for your microscope.
Nikon Quadfluor for microscopes: E200, E400, E600, E800, E1000, TS100, TS100F, TE200, TE300, ME600L, L150A, and some Labophot, Optiphot, and Diaphot series