{{product.AlternativeText}}
{{product.AlternativeText}}

/ 

|
OR Continue Checkout View Cart ()

All {{categoryNode2.CategoryNodeInfo.Description}}
{{productSuggestion.AlternativeText}}
{{productSuggestion.AlternativeText}}

/ 

  Switch Customer

  | 

Go to recently viewed Go to wish list Go to product list
Switch Customer
{{product.AlternativeText}}
{{product.AlternativeText}}

/ 

|
OR Continue Checkout View Cart ()

All {{categoryNode2.CategoryNodeInfo.Description}}

BrightLine® single-band filter set, optimized for mTFP (Teal) and other like fluorophores, illuminated with LED-based light sources

Semrock Part Number: LED-mTFP-A-NQF-ZERO

IDEX Part Number: S-002950  /

Semrock

This filter set is optimized to be simultaneously the brightest and the highest signal-to-noise ratio (contrast) available for measuring mTFP (Teal) (or other key fluorophores – see complete list above). This state-of-the-art set has been optimized for popular LED based light sources. This set has been designed to deliver significant fluorescence signal improvements for LED based light sources compared with traditional sets designed for standard broadband light sources such as mercury or xenon arc lamps.

Interested in learning how this filter set will perform with your light source? Try Semrock's SearchLight plotting & calculation tool.

  • Price Not Available.
  • Each
    US Domestic pricing – contact your local distributor for other currency list prices
  • Price Not Available.
  • 1,573.00 USD Each
    US Domestic pricing – contact your local distributor for other currency list prices
  • 0.00
    0.00
  • Notify me when available
Filter set mounted in microscope holders/cubes found below in related products section.
Add to List Add to List

This set is mounted in a Nikon NQF Quadfluor Fluorescence Filter Holder, which is compatible with Nikon microscopes E200, E400, E600, E800, E1000, TS100, TS100F, TE 200, TE 300, ME600L, L150A, and some Labophot, Optiphot, and Diaphot series.

Filter Role Filter Size Maximum Thickness
Exciter (Diameter)25.0 mm5.0 mm
Emitter (Diameter)25.0 mm3.5 mm
Dichroic (L × W)25.2 mm × 35.6 mm
The Nikon “true” cube needs a Di with corner chamfered (-QF)		1.1 mm
(Can accept a 2 mm dichroic)
Optimized – Filter set is specifically optimized for that fluorophore.
Compatible – Should result in nearly ideal performance in most situations.
Acceptable – Actual performance is dependent on specific experimental conditions.
Fluorophore Peak Excitation Wavelength(nm) Peak Emission Wavelength(nm) Compatibility Display on Plot above
Acridine Yellow 470 550
AmCyan1 458 489
Aqua 431 430 478
ATTO 425 436 484
ATTO 465 453 507
BD Horizon V500 410 500
BOBO™-1 461 484
Cerulean 434 473
CFP (ECFP) 433 475
DY-415 418 470
ECFP 435 475
evoglow-Bs1 449 496
LysoSensor Green 448 502
mBBr+GSH 394 490
mTFP1 462 492
POPO-1 433 457
PO-PRO-1 433 456
SpectrumAqua 434 481
SYTO 45 451 485
SYTOX Blue 444 470
TagCFP 458 480

NQF Holder/Cube

This set is mounted in a Nikon NQF Quadfluor Fluorescence Filter Holder, which is compatible with Nikon microscopes E200, E400, E600, E800, E1000, TS100, TS100F, TE 200, TE 300, ME600L, L150A, and some Labophot, Optiphot, and Diaphot series.

Filter Role Filter Size Maximum Thickness
Exciter (Diameter)25.0 mm5.0 mm
Emitter (Diameter)25.0 mm3.5 mm
Dichroic (L × W)25.2 mm × 35.6 mm
The Nikon “true” cube needs a Di with corner chamfered (-QF)		1.1 mm
(Can accept a 2 mm dichroic)

You might also be interested in the following products

{{crossRefProduct.AlternativeText}} {{crossRefProduct.HoverImageAlternativeText}}

/

Recently Viewed

View All

FF01-422/503/572-25

FL-004039