Semrock’s LED-based light engine filter sets are designed to use common excitation filters between single-band and corresponding multiband configurations to simplify interchangeability when installing the excitation filters into the light engine. This not only provides seamless transition between using single-band and multiband filter sets but also provides significant cost savings.
This 7-filter "Sedat" quad-band set is designed for high-speed, sequential imaging of DAPI, FITC, and Texas Red (and other key fluorophores – see complete list above). This set has been designed to deliver significant fluorescence signal improvements for LED-based light engines, including 365 nm DAPI LEDs, compared with traditional sets designed for standard broadband light sources such as mercury or xenon arc lamps. The complete set is comprised of a triple-band beamsplitter with three single-band emitters intended to be mounted in filter wheels and three single-band exciters which can be installed into the LED light engine or mounted in filter wheels.
Interested in learning how this filter set will perform with your light source? Try Semrock's SearchLight plotting & calculation tool.
-
EachUS Domestic pricing – contact your local distributor for other currency list prices
-
3,269.00 USD EachUS Domestic pricing – contact your local distributor for other currency list prices
-
-
0.000.00 -
-
- Notify me when available
Filter set mounted in microscope holders/cubes found below in related products section.
total selected
Clear selection
Select all 7 products from all pages.
FF01-432/36-25
FL-004373 / 0
- Tavg > 93% 414 – 450 nm
- Center Wavelength of 432 nm and GMBW of 36 nm
- FWHM of 39.6 nm
FF02-641/75-25
FL-004436 / 0
- Tavg > 93% 604 – 679 nm
- Center Wavelength of 641.5 nm and GMBW of 75 nm
- FWHM of 81.7 nm
FF03-575/25-25
FL-004522 / 0
- Tavg > 93% 562.5 – 587.5 nm
- Center Wavelength of 575 nm and GMBW of 25 nm
- FWHM of 31.3 nm
FF01-378/52-25
FL-004583 / 0
- Tavg > 85% 352 – 404 nm
- Center Wavelength of 378 nm and GMBW of 52 nm
- FWHM of 54.6 nm
FF01-474/27-25
FL-004596 / 0
- Tavg > 93% 461.0 – 487.5 nm
- Center Wavelength of 474.3 nm and GMBW of 26.5 nm
- FWHM of 30.9 nm
FF02-525/40-25
FL-004652 / 0
- Tavg > 90% 505 – 545 nm
- Center Wavelength of 525 nm and GMBW of 40 nm
- FWHM of 47 nm
FF409/493/596-Di02-25x36
FL-007086 / 0
- Dichroic Beamsplitter with edges at 409 nm, 493 nm & 596 nm
- Ravg > 95% 350 – 404 nm, Ravg > 95% 461 – 487.5 nm & Ravg > 95% 559.5 – 589.5 nm
- Tavg > 93% 414 – 450 nm, Tavg > 93% 499.5 – 546 nm & Tavg > 93% 604 – 850 nm
1 of 1
This set is mounted in a Leica Microsystems DMi8 (“P-Cube”) Fluorescence Filter Holder, which is compatible with the DMi8 Leica microscope.
| Filter Role | Filter Size | Maximum Thickness |
| Exciter (Diameter) | 25.0 mm | 5.0 mm |
| Emitter (Diameter) | 25.0 mm | 3.5 mm |
| Dichroic (L × W) | 25.2 mm × 35.6 mm | 1.1 mm |
Optimized – Filter set is specifically optimized for that fluorophore.
Compatible – Should result in nearly ideal performance in most situations.
Acceptable – Actual performance is dependent on specific experimental conditions.
| Fluorophore | Peak Excitation Wavelength(nm) | Peak Emission Wavelength(nm) | Compatibility | Display on Plot above |
|---|---|---|---|---|
| 2-dodecylresorufin-lipid | 582 | 595 |
|
|
| 5-carboxynapthofluorescein (pH 10) | 555 | 615 |
|
|
| 5-FAM (5-carboxyfluorescein) | 492 | 518 |
|
|
| 5-ROX (carboxy-X-rhodamine) | 578 | 604 |
|
|
| 7-AAD (7-aminoactinomycin D) | 548 | 648 |
|
|
| Acridine Orange (+DNA) | 502 | 526 |
|
|
| Acridine Yellow | 470 | 550 |
|
|
| Alexa Fluor® 405 | 401 | 422 |
|
|
| Alexa Fluor® 430 | 431 | 541 |
|
|
| Alexa Fluor® 488 | 499 | 520 |
|
|
| Alexa Fluor® 500 | 503 | 525 |
|
|
| Alexa Fluor® 568 | 579 | 603 |
|
|
| Alexa Fluor® 594 | 590 | 618 |
|
|
| Alexa Fluor® 660 | 663 | 691 |
|
|
| AmCyan1 | 458 | 489 |
|
|
| AsRed 2 | 576 | 592 |
|
|
| ATTO 465 | 453 | 507 |
|
|
| ATTO 488 | 500 | 525 |
|
|
| ATTO 495 | 495 | 527 |
|
|
| ATTO 565 | 563 | 592 |
|
|
| ATTO 590 | 594 | 624 |
|
|
| ATTO 594 | 601 | 624 |
|
|
| BD Horizon V450 | 406 | 449 |
|
|
| BFP (EBFP) | 380 | 440 |
|
|
| BOBO™-1 | 461 | 484 |
|
|
| BOBO™-3 | 570 | 605 |
|
|
| BODIPY FL | 505 | 512 |
|
|
| BODIPY FL-MeOH | 502 | 511 |
|
|
| BODIPY TR-X phallacidin | 590 | 621 |
|
|
| BV421 - BD Horizon Brilliant™ Violet 421 | 407 | 421 |
|
|
| Calcein | 494 | 514 |
|
|
| Calcium Crimson | 589 | 609 |
|
|
| Carboxynaphthofluorescein | 599 | 674 |
|
|
| Cascade Blue™ | 401 | 419 |
|
|
| CellTrace BODIPY TR methyl ester | 598 | 625 |
|
|
| CellTrace calcein violet | 400 | 452 |
|
|
| CellTracker Red CMTPX | 586 | 614 |
|
|
| CFP2 | 490 | 510 |
|
|
| Cy2™ | 492 | 507 |
|
|
| Cy3.5™ | 578 | 591 |
|
|
| CyQUANT GR-DNA | 502 | 523 |
|
|
| DAF-FM-NO | 495 | 519 |
|
|
| DAPI | 359 | 461 |
|
|
| DDAO | 648 | 657 |
|
|
| Dendra2 (Green) | 491 | 507 |
|
|
| DiO | 475 | 500 |
|
|
| Dronpa | 502 | 516 |
|
|
| DY-505-Phalloidin | 503 | 530 |
|
|
| DY-590 | 582 | 599 |
|