Semrock’s LED-based light engine filter sets are designed to use common excitation filters between single-band and corresponding multiband configurations to simplify interchangeability when installing the excitation filters into the light engine. This not only provides seamless transition between using single-band and multiband filter sets but also provides significant cost savings.
This filter set is optimized to simultaneously deliver bright signal and high signal-to-noise ratio (contrast) for measuring CFP (or other key fluorophores – see complete list above). This set is spectrally aligned for excitation with many of the broadband or discrete LED-based light engines available in the market. Interested in learning how this filter set will perform with your light source? Try Semrock's SearchLight plotting & calculation tool.
-
EachUS Domestic pricing – contact your local distributor for other currency list prices
-
1,354.00 USD EachUS Domestic pricing – contact your local distributor for other currency list prices
-
-
0.000.00 -
-
- Notify me when available
total selected
Clear selection
Select all 3 products from all pages.
FF01-483/32-25
FL-004598 / 0
- Tavg > 93% 467 – 499 nm
- Center Wavelength of 483 nm and GMBW of 32 nm
- FWHM of 38.2 nm
FF02-438/24-25
FL-004649 / 0
- Tavg > 93% 426 – 450 nm
- Center Wavelength of 438 nm and GMBW of 24 nm
- FWHM of 29.5 nm
FF458-Di02-25x36
FL-007114 / 0
- Dichroic Beamsplitter with edge at 458 nm
- Ravg > 98% 350 – 450 nm
- Tavg > 93% 467 – 950 nm
- Flatness / RWE: Standard Epi-fluorescence
Custom sizing delivery confirmed ARO (sizing fee applies).
1 of 1
This set is mounted in a ZEISS Microscopy FL CUBE EC P&C Fluorescence Filter Holder, which is compatible with Axio Imager, Axiostar Plus, Axioskop 40, Axioskop 2 (post-2001), Axioplan 2i, Axioplan 2ie, Axiovert 200, Axiovert 40, Axio Observer, Axio Examiner, and Axio Scope A1, from ZEISS Microscopy.
| Filter Role | Filter Size | Maximum Thickness |
| Exciter (Diameter) | 25.0 mm | 5.0 mm |
| Emitter (Diameter) | 25.0 mm | 5.0 mm |
| Dichroic (L × W) | 25.2 mm × 35.6 mm | 1.1 mm |
| Topic | Description |
| Cleaning Optical Filters | Instructions for cleaning hard coated optical filters |
| Filter Reliability | Compares the performance and reliability of hard coated filters to traditional soft-coated filters and provides information about the testing standards for Semrock filters |
| Working with Optical Density | Tables to describe the relationship between OD and transmission with tips for quickly calculating OD |
| What is Pixel Shift, and how does the Semrock ZERO™ option help? | Why Pixel Shift degrades multicolor fluorescence imaging performance, and how the ZERO™ option mitigates this for Avant and BrightLine filter sets. |
Optimized – Filter set is specifically optimized for that fluorophore.
Compatible – Should result in nearly ideal performance in most situations.
Acceptable – Actual performance is dependent on specific experimental conditions.
| Fluorophore | Peak Excitation Wavelength(nm) | Peak Emission Wavelength(nm) | Compatibility | Display on Plot above |
|---|---|---|---|---|
| Acridine Yellow | 470 | 550 |
|
|
| AmCyan1 | 458 | 489 |
|
|
| Aqua 431 | 430 | 478 |
|
|
| ATTO 425 | 436 | 484 |
|
|
| ATTO 465 | 453 | 507 |
|
|
| BD Horizon V500 | 410 | 500 |
|
|
| BOBO™-1 | 461 | 484 |
|
|
| Cerulean | 434 | 473 |
|
|
| CFP (ECFP) | 433 | 475 |
|
|
| DY-415 | 418 | 470 |
|
|
| ECFP | 435 | 475 |
|
|
| evoglow-Bs1 | 449 | 496 |
|
|
| LysoSensor Green | 448 | 502 |
|
|
| mBBr+GSH | 394 | 490 |
|
|
| mTFP1 | 462 | 492 |
|
|
| POPO-1 | 433 | 457 |
|
|
| PO-PRO-1 | 433 | 456 |
|
|
| SpectrumAqua | 434 | 481 |
|
|
| SYTO 45 | 451 | 485 |
|
|
| SYTOX Blue | 444 | 470 |
|
|
| TagCFP | 458 | 480 |
|
total selected
Clear selection
Select all 3 products from all pages.
FF01-483/32-25
FL-004598 / 0
- Tavg > 93% 467 – 499 nm
- Center Wavelength of 483 nm and GMBW of 32 nm
- FWHM of 38.2 nm
FF02-438/24-25
FL-004649 / 0
- Tavg > 93% 426 – 450 nm
- Center Wavelength of 438 nm and GMBW of 24 nm
- FWHM of 29.5 nm
FF458-Di02-25x36
FL-007114 / 0
- Dichroic Beamsplitter with edge at 458 nm
- Ravg > 98% 350 – 450 nm
- Tavg > 93% 467 – 950 nm
- Flatness / RWE: Standard Epi-fluorescence
Custom sizing delivery confirmed ARO (sizing fee applies).
1 of 1
This set is mounted in a ZEISS Microscopy FL CUBE EC P&C Fluorescence Filter Holder, which is compatible with Axio Imager, Axiostar Plus, Axioskop 40, Axioskop 2 (post-2001), Axioplan 2i, Axioplan 2ie, Axiovert 200, Axiovert 40, Axio Observer, Axio Examiner, and Axio Scope A1, from ZEISS Microscopy.
| Filter Role | Filter Size | Maximum Thickness |
| Exciter (Diameter) | 25.0 mm | 5.0 mm |
| Emitter (Diameter) | 25.0 mm | 5.0 mm |
| Dichroic (L × W) | 25.2 mm × 35.6 mm | 1.1 mm |
| Topic | Description |
| Cleaning Optical Filters | Instructions for cleaning hard coated optical filters |
| Filter Reliability | Compares the performance and reliability of hard coated filters to traditional soft-coated filters and provides information about the testing standards for Semrock filters |
| Working with Optical Density | Tables to describe the relationship between OD and transmission with tips for quickly calculating OD |
| What is Pixel Shift, and how does the Semrock ZERO™ option help? | Why Pixel Shift degrades multicolor fluorescence imaging performance, and how the ZERO™ option mitigates this for Avant and BrightLine filter sets. |
You might also be interested in the following products
Please contact your Partner with ARV Optics to purchase.
To purchase this product, click into product details for more information.
Adding...
Removing
Processing...
{{productContent.processedProductsCount}} of {{productContent.model.matrixProducts.length}}