Semrock’s LED-based light engine filter sets are designed to use common excitation filters between single-band and corresponding multiband configurations to simplify interchangeability when installing the excitation filters into the light engine. This not only provides seamless transition between using single-band and multiband filter sets but also provides significant cost savings.
This filter set is optimized to simultaneously deliver bright signal and high signal-to-noise ratio (contrast) for measuring CFP (or other key fluorophores – see complete list above). This set is spectrally aligned for excitation with many of the broadband or discrete LED-based light engines available in the market. Interested in learning how this filter set will perform with your light source? Try Semrock's SearchLight plotting & calculation tool.
-
EachUS Domestic pricing – contact your local distributor for other currency list prices
-
1,055.00 USD EachUS Domestic pricing – contact your local distributor for other currency list prices
-
-
0.000.00 -
-
- Notify me when available
Filter set mounted in microscope holders/cubes found below in related products section.
Set Components
FF01-483/32-25FL-004598
Each
|
FL-004598 |
|
FF02-438/24-25FL-004649
Each
|
FL-004649 |
|
FF458-Di02-25x36FL-007114
Each
Custom sizing delivery confirmed ARO (sizing fee applies). |
FL-007114 |
total selected
Clear selection
Select all 12 products from all pages.
LED-CFP-A-NQF
S-001633 / 0
This set is delivered mounted in microscope filter holder, often called 'cube', ready for your microscope.
Nikon Quadfluor for microscopes: E200, E400, E600, E800, E1000, TS100, TS100F, TE200, TE300, ME600L, L150A, and some Labophot, Optiphot, and Diaphot series
LED-CFP-A-NTE
S-001123 / 0
This set is delivered mounted in microscope filter holder, often called 'cube', ready for your microscope.
Nikon TE 2000 for microscopes: TE 2000, 50i, 55i, 80i, 90i, Eclipse Ti, Ni, and Ci series, and any using the Epi-fluor Illuminator
LED-CFP-A-OMF
S-000317 / 0
This set is delivered mounted in microscope filter holder, often called 'cube', ready for your microscope.
Olympus U-MF2 for microscopes: AX70, BX, BX41, BX50, BX51, BX60, BX61, BX50/51WI, BX60/61WI, IX50, IX51, IX70, IX71, IX81
LED-CFP-A-ZHE
S-001079 / 0
This set is delivered mounted in microscope filter holder, often called 'cube', ready for your microscope.
Zeiss FL Cube EC P+C for microscopes: Axio Imager, Axiostar Plus, Axioskop 40, Axioskop 2 (post-2001), Axioplan 2i, Axioplan 2ie, Axiovert 200, Axiovert 40, Axio Observer, Axio Examiner and Axio Scope A1
LED-CFP-A-OFF
S-001635 / 0
This set is delivered mounted in microscope filter holder, often called 'cube', ready for your microscope.
Olympus U-FF for microscopes: BX53, BX63
LED-CFP-A-NQF-ZERO
S-001634 / 0
This set is delivered mounted in microscope filter holder, often called 'cube', ready for your microscope.
Nikon Quadfluor for microscopes: E200, E400, E600, E800, E1000, TS100, TS100F, TE200, TE300, ME600L, L150A, and some Labophot, Optiphot, and Diaphot series
LED-CFP-A-NTE-ZERO
S-000316 / 0
This set is delivered mounted in microscope filter holder, often called 'cube', ready for your microscope.
Nikon TE 2000 for microscopes: TE 2000, 50i, 55i, 80i, 90i, Eclipse Ti, Ni, and Ci series, and any using the Epi-fluor Illuminator