This filter set is optimized to be a general-purpose longpass filter set for measuring LiCorIR800 and its variants.
-
EachUS Domestic pricing – contact your local distributor for other currency list prices
-
1,648.00 USD EachUS Domestic pricing – contact your local distributor for other currency list prices
-
-
0.000.00 -
-
- Notify me when available
total selected
Clear selection
Select all 3 products from all pages.
FF01-747/33-25
FL-004637 / 0
- Tavg > 93% 731 – 764 nm
- Center Wavelength of 747 nm and GMBW of 33 nm
- FWHM of 41.1 nm
FF776-Di01-25x36
FL-007130 / 0
- Dichroic Beamsplitter with edge at 776 nm
- Ravg > 98% 450 – 764 nm
- Tavg > 93% 789 – 1100 nm
- Flatness / RWE: Standard Epi-fluorescence
FF01-776/LP-25
FL-009105 / 0
- Filter with 50% edge at 785 nm
- Tavg > 93% 789 – 1200 nm
1 of 1
This set is mounted in a Nikon NQF Quadfluor Fluorescence Filter Holder, which is compatible with Nikon microscopes E200, E400, E600, E800, E1000, TS100, TS100F, TE 200, TE 300, ME600L, L150A, and some Labophot, Optiphot, and Diaphot series.
| Filter Role | Filter Size | Maximum Thickness |
| Exciter (Diameter) | 25.0 mm | 5.0 mm |
| Emitter (Diameter) | 25.0 mm | 3.5 mm |
| Dichroic (L × W) | 25.2 mm × 35.6 mm The Nikon “true” cube needs a Di with corner chamfered (-QF) | 1.1 mm (Can accept a 2 mm dichroic) |
Optimized – Filter set is specifically optimized for that fluorophore.
Compatible – Should result in nearly ideal performance in most situations.
Acceptable – Actual performance is dependent on specific experimental conditions.
| Fluorophore | Peak Excitation Wavelength(nm) | Peak Emission Wavelength(nm) | Compatibility | Display on Plot above |
|---|---|---|---|---|
| Alexa Fluor® 750 | 751 | 776 |
|
|
| Alexa Fluor® 790 | 782 | 805 |
|
|
| Cy7™ | 753 | 775 |
|
|
| DiR | 750 | 782 |
|
|
| DY-781 | 784 | 802 |
|
|
| DyLight 750 | 751 | 778 |
|
|
| DyLight 800 | 777 | 794 |
|
|
| HiLyte Fluor™ 750 | 750 | 778 |
|
|
| IRDye 800 CW-MeOH | 778 | 801 |
|
|
| IRDye 800CW | 775 | 792 |
|
|
| IRDye 800CW-NHS Ester | 775 | 792 |
|
|
| IRDye 800Phosphoramidite | 257 | 809 |
|
|
| IRDye 800RS | 787 | 812 |
|
|
| LIVE-DEAD Fixable Near-IR Dead Cell Stain | 752 | 776 |
|
|
| Qdot® 800 Nanocrystals | 300 | 792 |
|
total selected
Clear selection
Select all 3 products from all pages.
FF01-747/33-25
FL-004637 / 0
- Tavg > 93% 731 – 764 nm
- Center Wavelength of 747 nm and GMBW of 33 nm
- FWHM of 41.1 nm
FF776-Di01-25x36
FL-007130 / 0
- Dichroic Beamsplitter with edge at 776 nm
- Ravg > 98% 450 – 764 nm
- Tavg > 93% 789 – 1100 nm
- Flatness / RWE: Standard Epi-fluorescence
FF01-776/LP-25
FL-009105 / 0
- Filter with 50% edge at 785 nm
- Tavg > 93% 789 – 1200 nm
1 of 1
This set is mounted in a Nikon NQF Quadfluor Fluorescence Filter Holder, which is compatible with Nikon microscopes E200, E400, E600, E800, E1000, TS100, TS100F, TE 200, TE 300, ME600L, L150A, and some Labophot, Optiphot, and Diaphot series.
| Filter Role | Filter Size | Maximum Thickness |
| Exciter (Diameter) | 25.0 mm | 5.0 mm |
| Emitter (Diameter) | 25.0 mm | 3.5 mm |
| Dichroic (L × W) | 25.2 mm × 35.6 mm The Nikon “true” cube needs a Di with corner chamfered (-QF) | 1.1 mm (Can accept a 2 mm dichroic) |
You might also be interested in the following products
Adding...
Removing
Processing...
{{productContent.processedProductsCount}} of {{productContent.model.matrixProducts.length}}
Recently Viewed
View All
FF01-340/22-25
FL-004328