BrightLine® single-band filter set, optimized for Indocyanine Green and other like fluorophores

Semrock Part Number: ICG-B-NTE

IDEX Part Number: S-001596  /

Semrock

This filter set is ideal for use with ICG as well as other deep-red/near-infrared fluorophores. The longer excitation and emission wavelengths of these fluorophores enable deeper tissue penetration. The superb brightness and excellent signal-to-noise ratio of this filter set is also ideal since deep tissue imaging applications often also tend to yield very low light levels.

  • Price Not Available.
  • Each
    US Domestic pricing – contact your local distributor for other currency list prices
  • Price Not Available.
  • 1,569.00 USD Each
    US Domestic pricing – contact your local distributor for other currency list prices
  • 0.00
    0.00
  • Notify me when available

FF01-769/41-25

FL-004319 / 0

Out of Stock Backordered In Stock
  • Tavg > 93% 749 – 790 nm
  • Center Wavelength of 769.5 nm and GMBW of 41 nm
  • FWHM of 49.3 nm

FF01-832/37-25

FL-004507 / 0

Out of Stock Backordered In Stock
  • Tavg > 93% 813.5 – 850.5 nm
  • Center Wavelength of 832 nm and GMBW of 37 nm
  • FWHM of 45.4 nm

FF801-Di02-25x36

FL-007164 / 0

Out of Stock Backordered In Stock
  • Dichroic Beamsplitter with edge at 801 nm
  • Ravg > 98% 450 – 790 nm
  • Tavg > 93% 813.5 – 1100 nm
  •  Flatness / RWE: Standard Epi-fluorescence

1 of 1

This set is mounted in a Nikon NTE Fluorescence Filter Holder, which is compatible with Nikon microscopes TE 2000, 50i, 55i, 80i, 90i, Eclipse Ti, Ni, and Ci series, and any using the Epi-fluor Illuminator.

Filter Role Filter Size Maximum Thickness
Exciter (Diameter)25.0 mm5.0 mm
Emitter (Diameter)25.0 mm3.5 mm
Dichroic (L × W)25.2 mm × 35.6 mm1.1 mm
(Can accept 2 mm dichroic)
Optimized – Filter set is specifically optimized for that fluorophore.
Compatible – Should result in nearly ideal performance in most situations.
Acceptable – Actual performance is dependent on specific experimental conditions.
Fluorophore Peak Excitation Wavelength(nm) Peak Emission Wavelength(nm) Compatibility Display on Plot above
Alexa Fluor® 790 782 805
DY-781 784 802
ICG 768 807
IRDye 800 CW-MeOH 778 801
IRDye 800Phosphoramidite 257 809

Related Products

FF01-769/41-25

FL-004319 / 0

Out of Stock Backordered In Stock
  • Tavg > 93% 749 – 790 nm
  • Center Wavelength of 769.5 nm and GMBW of 41 nm
  • FWHM of 49.3 nm

FF01-832/37-25

FL-004507 / 0

Out of Stock Backordered In Stock
  • Tavg > 93% 813.5 – 850.5 nm
  • Center Wavelength of 832 nm and GMBW of 37 nm
  • FWHM of 45.4 nm

FF801-Di02-25x36

FL-007164 / 0

Out of Stock Backordered In Stock
  • Dichroic Beamsplitter with edge at 801 nm
  • Ravg > 98% 450 – 790 nm
  • Tavg > 93% 813.5 – 1100 nm
  •  Flatness / RWE: Standard Epi-fluorescence

1 of 1

This set is mounted in a Nikon NTE Fluorescence Filter Holder, which is compatible with Nikon microscopes TE 2000, 50i, 55i, 80i, 90i, Eclipse Ti, Ni, and Ci series, and any using the Epi-fluor Illuminator.

Filter Role Filter Size Maximum Thickness
Exciter (Diameter)25.0 mm5.0 mm
Emitter (Diameter)25.0 mm3.5 mm
Dichroic (L × W)25.2 mm × 35.6 mm1.1 mm
(Can accept 2 mm dichroic)