801 nm edge BrightLine® single-edge standard epi-fluorescence dichroic beamsplitter

Semrock Part Number: FF801-Di02-25x36

IDEX Part Number: FL-007164  /

Semrock
Semrock offers a wide range of dichroic beamsplitters that exhibit steep edges with very high reflection and transmission bands. This standard epi-fluorescence dichroic beamsplitter is optimized only for broadband light sources such as LEDs and metal halide lamps.
  • Price Not Available.
  • Each
    US Domestic pricing – contact your local distributor for other currency list prices
  • Price Not Available.
  • 380.00 USD Each
    US Domestic pricing – contact your local distributor for other currency list prices
  • 0.00
    0.00
  • Notify me when available
Optical Specifications Value
Transmission Band 1 Tavg > 93% 813.5 – 1100 nm
Transmission Band 2 Tavg > 93% 813.5 – 885 nm
Reflection Band 1 Ravg > 98% 450 – 790 nm
Reflection Band 2 Ravg > 98% 749 – 790 nm
Edge Wavelength 1 801.5 nm
General Filter Specifications Value
Angle of Incidence 45 ± 1.5 degrees
Cone Half-angle 2 degrees
Optical Damage Rating Testing has proven to show no signs of degradation when exposed to at least 6.0 W of power from an unfiltered xenon arc lamp over a 25 mm diameter (corresponding to 1.2 W/cm2) for over 500 hours.
Reflected Wavefront Error >> 6λ P-V RWE @ 632.8 nm
Steepness Standard
Flatness / RWE Classification   Standard Epi-fluorescence
Physical Filter Specifications   Value
Transverse Dimensions (L x W) 25.2 mm x 35.6 mm
Transverse Tolerance ± 0.1 mm
Clear Aperture ≥ 80%
Scratch-Dig 60-40
Filter Thickness (unmounted) 1.05 mm
Filter Thickness (unmounted) 1.05 mm
Filter Thickness Tolerance (unmounted) ± 0.05 mm
Filter Thickness Tolerance (unmounted) ± 0.05 mm
Orientation Reflective surface marked with part number - Orient in direction of incoming light
TopicDescription
Cleaning Optical FiltersInstructions for cleaning hard coated optical filters
Filter ReliabilityCompares the performance and reliability of hard coated filters to traditional soft-coated filters and provides information about the testing standards for Semrock filters
Flatness of Dichroic BeamsplittersDescribes the impact of non-flat dichroic beamsplitters on microscope image fidelity
Measuring Light with Wavelengths & WavenumbersCompares units of wavelength to wavenumbers and provides formulas for calculating wavenumber shift
Laser Damage ThresholdProvides information for calculating laser damage threshold for pulsed and continuous wave lasers
Filter Types for Raman Spectroscopy ApplicationsCompares the performance of different combinations of LWP and SWP edge filters, notch and laser line filters for Raman applications
RazorEdge Filter LayoutsDescribes two different filter layouts that are commonly used in Raman applications
Journal Article
TopicDescription
Thin-Film Filters for Raman SpectroscopyTuran Erdogan, PhD, and Victor Mizrahi, PhD, Semrock Inc., Spectroscopy, December 2004
Describes the types and functions of filters commonly used in Raman spectroscopy
White Paper
TopicDescription
Flatness of Dichroic Beamsplitters Affects Focus and Image QualityAnalysis of how the radius of curvature of a dichroic filter affects focal plane shift, spot size and image fidelity in fluorescence microscopy.
Application
TopicDescription
Raman SpectroscopyAn overview of Raman spectroscopy, including solutions from Semrock and additional learning resources.

Specifications

TopicDescription
Cleaning Optical FiltersInstructions for cleaning hard coated optical filters
Filter ReliabilityCompares the performance and reliability of hard coated filters to traditional soft-coated filters and provides information about the testing standards for Semrock filters
Flatness of Dichroic BeamsplittersDescribes the impact of non-flat dichroic beamsplitters on microscope image fidelity
Measuring Light with Wavelengths & WavenumbersCompares units of wavelength to wavenumbers and provides formulas for calculating wavenumber shift
Laser Damage ThresholdProvides information for calculating laser damage threshold for pulsed and continuous wave lasers
Filter Types for Raman Spectroscopy ApplicationsCompares the performance of different combinations of LWP and SWP edge filters, notch and laser line filters for Raman applications
RazorEdge Filter LayoutsDescribes two different filter layouts that are commonly used in Raman applications
Journal Article
TopicDescription
Thin-Film Filters for Raman SpectroscopyTuran Erdogan, PhD, and Victor Mizrahi, PhD, Semrock Inc., Spectroscopy, December 2004
Describes the types and functions of filters commonly used in Raman spectroscopy
White Paper
TopicDescription
Flatness of Dichroic Beamsplitters Affects Focus and Image QualityAnalysis of how the radius of curvature of a dichroic filter affects focal plane shift, spot size and image fidelity in fluorescence microscopy.
Application
TopicDescription
Raman SpectroscopyAn overview of Raman spectroscopy, including solutions from Semrock and additional learning resources.