635 nm edge BrightLine^® single-edge standard epi-fluorescence dichroic beamsplitter

Semrock Part Number: FF635-Di01-25x36

IDEX Part Number: FL-006868 /

Optical Specifications	Value
Transmission Band 1	Tavg > 90% 636 – 830 nm
Reflection Band 1	Ravg > 94% 507 – 622 nm
Edge Wavelength 1	635 nm
General Filter Specifications	Value
Angle of Incidence	45 ± 1.5 degrees
Cone Half-angle	2 degrees
Optical Damage Rating	Testing has proven to show no signs of degradation when exposed to at least 6.0 W of power from an unfiltered xenon arc lamp over a 25 mm diameter (corresponding to 1.2 W/cm2) for over 500 hours.
Flatness / RWE Classification	Standard Epi-fluorescence
Reflected Wavefront Error	>> 6λ P-V RWE @ 632.8 nm
Steepness	Standard
Physical Filter Specifications	Value
Transverse Dimensions (L x W)	25.2 mm x 35.6 mm
Transverse Tolerance	± 0.1 mm
Clear Aperture	≥ 80% (elliptical)
Scratch-Dig	60-40
Filter Thickness (unmounted)	1.05 mm
Filter Thickness (unmounted)	1.05 mm
Filter Thickness Tolerance (unmounted)	± 0.05 mm
Filter Thickness Tolerance (unmounted)	± 0.05 mm
Orientation	Reflective surface marked with part number - Orient in direction of incoming light

Optical Specifications: Value
Transmission Band 1: Tavg > 90% 636 – 830 nm
Reflection Band 1: Ravg > 94% 507 – 622 nm
Edge Wavelength 1: 635 nm
General Filter Specifications: Value
Angle of Incidence: 45 ± 1.5 degrees
Cone Half-angle: 2 degrees
Optical Damage Rating: Testing has proven to show no signs of degradation when exposed to at least 6.0 W of power from an unfiltered xenon arc lamp over a 25 mm diameter (corresponding to 1.2 W/cm2) for over 500 hours.
Flatness / RWE Classification: Standard Epi-fluorescence
Reflected Wavefront Error: >> 6λ P-V RWE @ 632.8 nm
Steepness: Standard
Physical Filter Specifications: Value
Transverse Dimensions (L x W): 25.2 mm x 35.6 mm
Transverse Tolerance: ± 0.1 mm
Clear Aperture: ≥ 80% (elliptical)
Scratch-Dig: 60-40
Filter Thickness (unmounted): 1.05 mm
Filter Thickness (unmounted): 1.05 mm
Filter Thickness Tolerance (unmounted): ± 0.05 mm
Filter Thickness Tolerance (unmounted): ± 0.05 mm
Orientation: Reflective surface marked with part number - Orient in direction of incoming light

Specifications