810/10 nm BrightLine^® single-band bandpass filter

Semrock Part Number: FF01-810/10-25

IDEX Part Number: FL-004643 /

Optical Specifications	Value
Transmission Band 1	Tavg > 90% 805 – 815 nm
Blocking Band 1	ODavg > 6 200 – 275 nm (Design specification - measurements are noise-floor limited)
Blocking Band 2	ODavg > 6 275 – 788 nm
Blocking Band 3	ODavg > 6 832 – 1200 nm
Center Wavelength 1	810 nm
Guaranteed Minimum Bandwidth 1	10 nm
FWHM Bandwidth 1 (nominal)	20.2 nm
General Filter Specifications	Value
Angle of Incidence	0 ± 5 degrees
Cone Half-angle	7 degrees
Optical Damage Rating	Testing has proven to show no signs of degradation when exposed to at least 6.0 W of power from an unfiltered xenon arc lamp over a 25 mm diameter (corresponding to 1.2 W/cm2) for over 500 hours.
Physical Filter Specifications	Value
Transverse Dimensions (diameter)	25 mm
Transverse Tolerance	+ 0.0 / – 0.1 mm
Filter Thickness (mounted)	3.5 mm
Filter Thickness Tolerance (mounted)	± 0.1 mm
Clear Aperture	≥ 22 mm
Scratch-Dig	60-40
Filter Thickness (unmounted)	2.0 mm
Filter Thickness Tolerance (unmounted)	± 0.1 mm
Orientation	Arrow on ring indicates preferred direction of propagation of light

total selected Clear selection Select all 7 products from all pages.

Available on

FF02-809/81-25

FL-004520 / 0

T_avg > 93% 768.5 – 849.5 nm
Center Wavelength of 809 nm and GMBW of 81 nm
FWHM of 88.4 nm

Available on

FF01-819/44-25

FL-004644 / 0

T_avg > 90% 797 – 841 nm
Center Wavelength of 819 nm and GMBW of 44 nm
FWHM of 58.6 nm

Available on

FF01-820/12-25

FL-004293 / 0

T_avg > 93% 814 – 826 nm
Center Wavelength of 820 nm and GMBW of 12 nm
FWHM of 20.6 nm

Available on

BLP01-830R-25

FL-008550 / 0

Filter with 50% edge at 846 nm
293.9 cm^-1 transition
T_avg > 93% from 853.2 – 1600 nm

Available on

BSP01-785R-25

FL-008521 / 0

Laser Wavelength = 785 nm
Filter 50% edge at 765.5 nm
313 cm^-1 transition
T_avg > 80% 350 – 400 nm
T_avg > 93% 400 – 758.2 nm

Available on

FF776-Di01-25x36

FL-007130 / 0

Dichroic Beamsplitter with edge at 776 nm
R_avg > 98% 450 – 764 nm
T_avg > 93% 789 – 1100 nm
Flatness / RWE: Standard Epi-fluorescence

Available on

FF875-Di01-25x36

FL-007131 / 0

Dichroic Beamsplitter with edge at 875 nm
R_avg > 98% 350 – 857.5 nm
T_avg > 93% 892.5 – 1600 nm
T_{avg p-pol} > 93% 892.5 – 1600 nm
T_{avg s-pol} > 93% 892.5 – 1600 nm
Flatness / RWE: Laser

1 of 1

Page Size

Topic	Description
Cleaning Optical Filters	Instructions for cleaning hard coated optical filters
Filter Reliability	Compares the performance and reliability of hard coated filters to traditional soft-coated filters and provides information about the testing standards for Semrock filters
Working with Optical Density	Tables to describe the relationship between OD and transmission with tips for quickly calculating OD

Link	Description
Request a Drawing	Looking for an optical filter drawing file for this product? Request one now!
Request Custom Optical Filters	Contact us today to start a conversation about custom optical filters.
Access Optical Filter Warranty	Find our warranty in our Terms & Conditions of Sale.
Semrock Optical Filters RoHS Certificate	RoHS, stands for Restriction of Hazardous Substances. The current RoHS Directive currently restricts the use of ten substances.
Semrock Optical Filters REACH Certificate	REACH is a regulation of the European Union, adopted to improve the protection of human health and the environment from the risks that can be posed by chemicals, while enhancing the competitiveness of the EU chemicals industry.
Download Optical Filters 101 Guide	Find an in-depth overview of optical filter principles, specifications, and applications. Request a digital copy of this guide now.
Request Clean Filter Checklist Poster	Looking to clean your optical filters? Need instructions? Request a printed copy of our Clean Filter Checklist Poster.

Optical Specifications: Value
Transmission Band 1: Tavg > 90% 805 – 815 nm
Blocking Band 1: ODavg > 6 200 – 275 nm (Design specification - measurements are noise-floor limited)
Blocking Band 2: ODavg > 6 275 – 788 nm
Blocking Band 3: ODavg > 6 832 – 1200 nm
Center Wavelength 1: 810 nm
Guaranteed Minimum Bandwidth 1: 10 nm
FWHM Bandwidth 1 (nominal): 20.2 nm
General Filter Specifications: Value
Angle of Incidence: 0 ± 5 degrees
Cone Half-angle: 7 degrees
Optical Damage Rating: Testing has proven to show no signs of degradation when exposed to at least 6.0 W of power from an unfiltered xenon arc lamp over a 25 mm diameter (corresponding to 1.2 W/cm2) for over 500 hours.
Physical Filter Specifications: Value
Transverse Dimensions (diameter): 25 mm
Transverse Tolerance: + 0.0 / – 0.1 mm
Filter Thickness (mounted): 3.5 mm
Filter Thickness Tolerance (mounted): ± 0.1 mm
Clear Aperture: ≥ 22 mm
Scratch-Dig: 60-40
Filter Thickness (unmounted): 2.0 mm
Filter Thickness Tolerance (unmounted): ± 0.1 mm
Orientation: Arrow on ring indicates preferred direction of propagation of light

total selected Clear selection Select all 7 products from all pages.

Available on

FF02-809/81-25

FL-004520 / 0

T_avg > 93% 768.5 – 849.5 nm
Center Wavelength of 809 nm and GMBW of 81 nm
FWHM of 88.4 nm

Available on

FF01-819/44-25

FL-004644 / 0

T_avg > 90% 797 – 841 nm
Center Wavelength of 819 nm and GMBW of 44 nm
FWHM of 58.6 nm

Available on

FF01-820/12-25

FL-004293 / 0

T_avg > 93% 814 – 826 nm
Center Wavelength of 820 nm and GMBW of 12 nm
FWHM of 20.6 nm

Available on

BLP01-830R-25

FL-008550 / 0

Filter with 50% edge at 846 nm
293.9 cm^-1 transition
T_avg > 93% from 853.2 – 1600 nm

Available on

BSP01-785R-25

FL-008521 / 0

Laser Wavelength = 785 nm
Filter 50% edge at 765.5 nm
313 cm^-1 transition
T_avg > 80% 350 – 400 nm
T_avg > 93% 400 – 758.2 nm

Available on

FF776-Di01-25x36

FL-007130 / 0

Dichroic Beamsplitter with edge at 776 nm
R_avg > 98% 450 – 764 nm
T_avg > 93% 789 – 1100 nm
Flatness / RWE: Standard Epi-fluorescence

Available on

FF875-Di01-25x36

FL-007131 / 0

Dichroic Beamsplitter with edge at 875 nm
R_avg > 98% 350 – 857.5 nm
T_avg > 93% 892.5 – 1600 nm
T_{avg p-pol} > 93% 892.5 – 1600 nm
T_{avg s-pol} > 93% 892.5 – 1600 nm
Flatness / RWE: Laser

1 of 1

Page Size

Topic	Description
Cleaning Optical Filters	Instructions for cleaning hard coated optical filters
Filter Reliability	Compares the performance and reliability of hard coated filters to traditional soft-coated filters and provides information about the testing standards for Semrock filters
Working with Optical Density	Tables to describe the relationship between OD and transmission with tips for quickly calculating OD

Link	Description
Request a Drawing	Looking for an optical filter drawing file for this product? Request one now!
Request Custom Optical Filters	Contact us today to start a conversation about custom optical filters.
Access Optical Filter Warranty	Find our warranty in our Terms & Conditions of Sale.
Semrock Optical Filters RoHS Certificate	RoHS, stands for Restriction of Hazardous Substances. The current RoHS Directive currently restricts the use of ten substances.
Semrock Optical Filters REACH Certificate	REACH is a regulation of the European Union, adopted to improve the protection of human health and the environment from the risks that can be posed by chemicals, while enhancing the competitiveness of the EU chemicals industry.
Download Optical Filters 101 Guide	Find an in-depth overview of optical filter principles, specifications, and applications. Request a digital copy of this guide now.
Request Clean Filter Checklist Poster	Looking to clean your optical filters? Need instructions? Request a printed copy of our Clean Filter Checklist Poster.

Recently Viewed

View All