792/64 nm BrightLine® single-band bandpass filter

Semrock Part Number: FF01-792/64-25

IDEX Part Number: FL-004149  /

Semrock
Individual fluorescence bandpass filters that have been optimized for use in a variety of fluorescence instruments. All thin-film, hard-coated construction for unsurpassed performance and reliability.
  • Price Not Available.
  • Each
    US Domestic pricing – contact your local distributor for other currency list prices
  • Price Not Available.
  • 525.00 USD Each
    US Domestic pricing – contact your local distributor for other currency list prices
  • 0.00
    0.00
  • Notify me when available
Optical Specifications Value
Transmission Band 1 Tavg > 93% 760 – 824 nm
Blocking Band 1 ODavg > 4 280 – 320 nm
Blocking Band 2   ODavg > 8 320 – 414 nm (Design specification - measurements are noise-floor limited).
Blocking Band 3 ODavg > 5 414 – 465 nm
Blocking Band 4   ODavg > 8 465 – 499 nm (Design specification - measurements are noise-floor limited)
Blocking Band 5 ODavg > 6 499 – 511 nm
Blocking Band 6   ODavg > 8 511 – 561 nm (Design specification - measurements are noise-floor limited)
Blocking Band 7 ODavg > 5 561 – 606 nm
Blocking Band 8   ODavg > 8 606 – 651 nm (Design specification - measurements are noise-floor limited)
Blocking Band 9 ODavg > 5 651 – 748 nm
Blocking Band 10 ODavg > 5 837 – 925 nm
Blocking Band 11 ODavg > 2 925 – 1100 nm
Center Wavelength 1 792 nm
Guaranteed Minimum Bandwidth 1 64 nm
FWHM Bandwidth 1 (nominal) 71.5 nm
General Filter Specifications Value
Angle of Incidence 0 ± 5 degrees
Cone Half-angle 7 degrees
Optical Damage Rating Testing has proven to show no signs of degradation when exposed to at least 6.0 W of power from an unfiltered xenon arc lamp over a 25 mm diameter (corresponding to 1.2 W/cm2) for over 500 hours.
Physical Filter Specifications   Value
Transverse Dimensions (diameter) 25 mm
Transverse Tolerance + 0.0 / – 0.1 mm
Filter Thickness (mounted) 3.5 mm
Filter Thickness Tolerance (mounted) ± 0.1 mm
Clear Aperture ≥ 22 mm
Scratch-Dig 60-40
Filter Thickness (unmounted) 2.0 mm
Filter Thickness Tolerance (unmounted) ± 0.1 mm
Orientation Arrow on ring indicates preferred direction of propagation of light
TopicDescription
Cleaning Optical FiltersInstructions for cleaning hard coated optical filters
Filter ReliabilityCompares the performance and reliability of hard coated filters to traditional soft-coated filters and provides information about the testing standards for Semrock filters
Working with Optical Density Tables to describe the relationship between OD and transmission with tips for quickly calculating OD

Specifications

TopicDescription
Cleaning Optical FiltersInstructions for cleaning hard coated optical filters
Filter ReliabilityCompares the performance and reliability of hard coated filters to traditional soft-coated filters and provides information about the testing standards for Semrock filters
Working with Optical Density Tables to describe the relationship between OD and transmission with tips for quickly calculating OD