Our website will be undergoing maintenance between Saturday, February 15, 2025 at 11:30 pm until Sunday, February 16, 2025 at 3:30 pm Eastern Standard Time. During this time frame, no orders can be placed, and website access may be limited. We appreciate your patience. Thank you.

711/25 nm BrightLine® single-band bandpass filter

Semrock Part Number: FF01-711/25-25

IDEX Part Number: FL-004052  /

Semrock
Individual fluorescence bandpass filters that have been optimized for use in a variety of fluorescence instruments. All thin-film, hard-coated construction for unsurpassed performance and reliability.
  • Price Not Available.
  • Each
    US Domestic pricing – contact your local distributor for other currency list prices
  • Price Not Available.
  • 525.00 USD Each
    US Domestic pricing – contact your local distributor for other currency list prices
  • 0.00
    0.00
  • Notify me when available
Optical Specifications Value
Transmission Band 1 Tavg > 90% 698.5 – 723.5 nm
Blocking Band 1   ODabs > 3 200 -­ 275 nm, (Design specification - measurements are noise-floor limited), ODabs > 3 200 -­ 275 nm, (Design specification - measurements are noise-floor limited)
Blocking Band 2 ODabs > 3 275 -­ 400 nm
Blocking Band 3 ODabs > 4 400 ­- 440 nm
Blocking Band 4 ODabs > 6 440 -­ 682 nm
Blocking Band 5 OD > 3.5 690 nm
Blocking Band 6 ODabs > 4 735 -­ 750 nm
Blocking Band 7 ODabs > 3 750 ­- 1200 nm
Center Wavelength 1 711 nm
Guaranteed Minimum Bandwidth 1 25 nm
FWHM Bandwidth 1 (nominal) 30.8 nm
General Filter Specifications Value
Angle of Incidence 0 ± 5 degrees
Cone Half-angle 7 degrees
Optical Damage Rating Testing has proven to show no signs of degradation when exposed to at least 6.0 W of power from an unfiltered xenon arc lamp over a 25 mm diameter (corresponding to 1.2 W/cm2) for over 500 hours.
Physical Filter Specifications   Value
Transverse Dimensions (diameter) 25 mm
Transverse Tolerance + 0.0 / – 0.1 mm
Filter Thickness (mounted) 5.0 mm
Filter Thickness Tolerance (mounted) ± 0.1 mm
Clear Aperture ≥ 21 mm
Scratch-Dig 60-40
Filter Thickness (unmounted) 3.5 mm
Filter Thickness Tolerance (unmounted) ± 0.1 mm
Orientation Arrow on ring indicates preferred direction of propagation of light

FF01-710/40-25

FL-003962 / 0

Out of Stock Backordered In Stock
  • Tavg > 93% 690 – 730 nm
  • Center Wavelength of 710 nm and GMBW of 40 nm
  • FWHM of 47.5 nm

FF01-716/40-25

FL-004457 / 0

Out of Stock Backordered In Stock
  • Tavg > 93% 696 – 736 nm
  • Center Wavelength of 716 nm and GMBW of 40 nm
  • FWHM of 47.2 nm

FF01-716/43-25

FL-003963 / 0

Out of Stock Backordered In Stock
• Tavg > 90% 694.5 – 737.5 nm
• Center Wavelength of 716 nm and GMBW of 43 nm
• FWHM of 50 nm

FF01-736/LP-25

FL-009027 / 0

Out of Stock Backordered In Stock
  • Filter with 50% edge at 754 nm
  • Tavg > 90% 761 – 850 nm

FF01-694/SP-25

FL-009449 / 0

Out of Stock Backordered In Stock
• Filter with 50% edge at 681 nm
• Tavg > 93% 481 – 676 nm

FF685-Di02-25x36

FL-007099 / 0

Out of Stock Backordered In Stock
  • Dichroic Beamsplitter with edge at 685 nm
  • Ravg > 98% 350 – 676 nm
  • Tavg > 93% 695 – 950 nm
  • Flatness / RWE: Standard Epi-fluorescence

FF740-Di01-25x36

FL-007065 / 0

Out of Stock Backordered In Stock
  • Dichroic Beamsplitter with edge at 740 nm
  • Ravg > 98% 480 – 720 nm
  • Tavg > 90% 750 – 825 nm
  • Flatness / RWE: Standard Epi-fluorescence

1 of 1

TopicDescription
Cleaning Optical FiltersInstructions for cleaning hard coated optical filters
Filter ReliabilityCompares the performance and reliability of hard coated filters to traditional soft-coated filters and provides information about the testing standards for Semrock filters
Working with Optical Density Tables to describe the relationship between OD and transmission with tips for quickly calculating OD

Specifications