692/40 nm BrightLine^® single-band bandpass filter

Semrock Part Number: FF01-692/40-25

IDEX Part Number: FL-004702 /

Optical Specifications	Value
Transmission Band 1	Tavg > 93% 672 – 712 nm
Blocking Band 1	ODavg > 1 200 - 275 nm (Design specification - measurements are noise-floor limited)
Blocking Band 2	ODavg > 1 275 – 400 nm
Blocking Band 3	ODavg > 2 400 – 545 nm
Blocking Band 4	ODavg > 5 545 – 608 nm
Blocking Band 5	ODavg > 10 608 – 648 nm (Design specification - measurements are noise-floor limited)
Blocking Band 6	OD > 4.5 660 nm
Blocking Band 7	ODavg > 5 728 – 925 nm
Center Wavelength 1	692 nm
Guaranteed Minimum Bandwidth 1	40 nm
FWHM Bandwidth 1 (nominal)	47.6 nm
General Filter Specifications	Value
Angle of Incidence	0 ± 5 degrees
Cone Half-angle	7 degrees
Optical Damage Rating	Testing has proven to show no signs of degradation when exposed to at least 6.0 W of power from an unfiltered xenon arc lamp over a 25 mm diameter (corresponding to 1.2 W/cm2) for over 500 hours.
Physical Filter Specifications	Value
Transverse Dimensions (diameter)	25 mm
Transverse Tolerance	+ 0.0 / – 0.1 mm
Filter Thickness (mounted)	3.5 mm
Filter Thickness Tolerance (mounted)	± 0.1 mm
Clear Aperture	≥ 22 mm
Scratch-Dig	60-40
Filter Thickness (unmounted)	2.0 mm
Filter Thickness Tolerance (unmounted)	± 0.1 mm
Orientation	Arrow on ring indicates preferred direction of propagation of light

total selected Clear selection Select all 8 products from all pages.

Available on

FF02-628/40-25

FL-004435 / 0

T_avg > 93% 608 – 648 nm
Center Wavelength of 628 nm and GMBW of 40 nm
FWHM of 46.5 nm

Available on

FF660-Di02-25x36

FL-007041 / 0

Dichroic Beamsplitter with edge at 660 nm
R_avg > 98% 350 – 651 nm
T_avg > 93% 669 – 950 nm
Flatness / RWE: Standard Epi-fluorescence

Available on

FF01-690/8-25

FL-004286 / 0

T_avg > 90% 686 – 694 nm
Center Wavelength of 690 nm and GMBW of 8 nm
FWHM of 12.0 nm

Available on

FF01-694/44-25

FL-004504 / 0

T_avg > 90% 672 – 716 nm
Center Wavelength of 694 nm and GMBW of 44 nm
FWHM of 52.4 nm

Available on

FF01-697/58-25

FL-003926 / 0

T_avg > 90% 667.5 – 725.5 nm
Center Wavelength of 696.5nm and GMBW of 58 nm
FWHM of 64.4 nm

Available on

FF01-715/LP-25

FL-009104 / 0

Filter with 50% edge at 723 nm
T_avg > 93% 725 – 1200 nm

Available on

FF01-680/SP-25

FL-009655 / 0

Filter with 50% edge at 654 nm
T_avg > 90% 350 – 650 nm

Available on

FF735-Di02-25x36

FL-007044 / 0

Dichroic Beamsplitter with edge at 735 nm
R_avg > 98% 350 – 720 nm
T_avg > 93% 750 – 1600 nm
T_{avg s-pol} > 90% 750 – 1600 nm
T_{avg p-pol} > 90% 750 – 1600 nm

Flatness / RWE: Standard Epi-fluorescence

1 of 1

Page Size

Topic	Description
Cleaning Optical Filters	Instructions for cleaning hard coated optical filters
Filter Reliability	Compares the performance and reliability of hard coated filters to traditional soft-coated filters and provides information about the testing standards for Semrock filters
Working with Optical Density	Tables to describe the relationship between OD and transmission with tips for quickly calculating OD

Optical Specifications: Value
Transmission Band 1: Tavg > 93% 672 – 712 nm
Blocking Band 1: ODavg > 1 200 - 275 nm (Design specification - measurements are noise-floor limited)
Blocking Band 2: ODavg > 1 275 – 400 nm
Blocking Band 3: ODavg > 2 400 – 545 nm
Blocking Band 4: ODavg > 5 545 – 608 nm
Blocking Band 5: ODavg > 10 608 – 648 nm (Design specification - measurements are noise-floor limited)
Blocking Band 6: OD > 4.5 660 nm
Blocking Band 7: ODavg > 5 728 – 925 nm
Center Wavelength 1: 692 nm
Guaranteed Minimum Bandwidth 1: 40 nm
FWHM Bandwidth 1 (nominal): 47.6 nm
General Filter Specifications: Value
Angle of Incidence: 0 ± 5 degrees
Cone Half-angle: 7 degrees
Optical Damage Rating: Testing has proven to show no signs of degradation when exposed to at least 6.0 W of power from an unfiltered xenon arc lamp over a 25 mm diameter (corresponding to 1.2 W/cm2) for over 500 hours.
Physical Filter Specifications: Value
Transverse Dimensions (diameter): 25 mm
Transverse Tolerance: + 0.0 / – 0.1 mm
Filter Thickness (mounted): 3.5 mm
Filter Thickness Tolerance (mounted): ± 0.1 mm
Clear Aperture: ≥ 22 mm
Scratch-Dig: 60-40
Filter Thickness (unmounted): 2.0 mm
Filter Thickness Tolerance (unmounted): ± 0.1 mm
Orientation: Arrow on ring indicates preferred direction of propagation of light

total selected Clear selection Select all 8 products from all pages.

Available on

FF02-628/40-25

FL-004435 / 0

T_avg > 93% 608 – 648 nm
Center Wavelength of 628 nm and GMBW of 40 nm
FWHM of 46.5 nm

Available on

FF660-Di02-25x36

FL-007041 / 0

Dichroic Beamsplitter with edge at 660 nm
R_avg > 98% 350 – 651 nm
T_avg > 93% 669 – 950 nm
Flatness / RWE: Standard Epi-fluorescence

Available on

FF01-690/8-25

FL-004286 / 0

T_avg > 90% 686 – 694 nm
Center Wavelength of 690 nm and GMBW of 8 nm
FWHM of 12.0 nm

Available on

FF01-694/44-25

FL-004504 / 0

T_avg > 90% 672 – 716 nm
Center Wavelength of 694 nm and GMBW of 44 nm
FWHM of 52.4 nm

Available on

FF01-697/58-25

FL-003926 / 0

T_avg > 90% 667.5 – 725.5 nm
Center Wavelength of 696.5nm and GMBW of 58 nm
FWHM of 64.4 nm

Available on

FF01-715/LP-25

FL-009104 / 0

Filter with 50% edge at 723 nm
T_avg > 93% 725 – 1200 nm

Available on

FF01-680/SP-25

FL-009655 / 0

Filter with 50% edge at 654 nm
T_avg > 90% 350 – 650 nm

Available on

FF735-Di02-25x36

FL-007044 / 0

Dichroic Beamsplitter with edge at 735 nm
R_avg > 98% 350 – 720 nm
T_avg > 93% 750 – 1600 nm
T_{avg s-pol} > 90% 750 – 1600 nm
T_{avg p-pol} > 90% 750 – 1600 nm

Flatness / RWE: Standard Epi-fluorescence

1 of 1

Page Size

Topic	Description
Cleaning Optical Filters	Instructions for cleaning hard coated optical filters
Filter Reliability	Compares the performance and reliability of hard coated filters to traditional soft-coated filters and provides information about the testing standards for Semrock filters
Working with Optical Density	Tables to describe the relationship between OD and transmission with tips for quickly calculating OD