650/13 nm BrightLine^® single-band bandpass filter

Semrock Part Number: FF01-650/13-25

IDEX Part Number: FL-004397 /

Optical Specifications	Value
Transmission Band 1	Tavg > 93% 643 – 656 nm
Blocking Band 1	ODavg > 5 200 – 275 nm (Design specification - measurements are noise-floor limited).
Blocking Band 2	ODavg > 5 275 – 623.5 nm
Blocking Band 3	ODavg > 10 677 – 722 nm (Design specification - measurements are noise-floor limited).
Blocking Band 4	ODavg > 5 722 – 925 nm
Center Wavelength 1	650 nm
Guaranteed Minimum Bandwidth 1	13 nm
FWHM Bandwidth 1 (nominal)	20.1 nm
General Filter Specifications	Value
Angle of Incidence	0 ± 5 degrees
Cone Half-angle	7 degrees
Optical Damage Rating	Testing has proven to show no signs of degradation when exposed to at least 6.0 W of power from an unfiltered xenon arc lamp over a 25 mm diameter (corresponding to 1.2 W/cm2) for over 500 hours.
Physical Filter Specifications	Value
Transverse Dimensions (diameter)	25 mm
Transverse Tolerance	+ 0.0 / - 0.1 mm
Filter Thickness (mounted)	5.0 mm
Filter Thickness Tolerance (mounted)	± 0.1 mm
Clear Aperture	≥ 21 mm
Scratch-Dig	60-40
Filter Thickness (unmounted)	2.0 mm
Filter Thickness Tolerance (unmounted)	± 0.1 mm
Orientation	Arrow on ring indicates preferred direction of propagation of light

total selected Clear selection Select all 9 products from all pages.

Available on

FF01-440/521/607/700-25

FL-004445 / 0

T_avg > 90% 420 – 460 nm, T_avg > 90% 510.5 – 531.5 nm, T_avg > 90% 590 – 624 nm & T_avg > 90% 677.5 – 722.5 nm
Center Wavelengths of 440 nm, 521 nm, 607 nm & 700 nm and GMBWs of 40 nm, 21 nm, 34 nm & 45 nm

Available on

FF410/504/582/669-Di01-25x36

FL-007087 / 0

Dichroic Beamsplitter with edges at 410 nm, 504 nm, 582 nm & 669 nm
R_avg > 95% 381.5 – 392.5 nm, R_avg > 95% 475 – 495 nm, R_avg > 95% 547 – 572 nm & R_avg > 95% 643 – 656 nm
T_avg > 90% 420 – 460 nm, T_avg > 90% 510 – 531 nm, T_avg > 90% 589.5 – 623.5 nm & T_avg > 90% 677 – 722 nm

Available on

FF01-647/57-25

FL-004142 / 0

T_avg > 92% 618.5 – 675.5 nm
Center Wavelength of 647 nm and GMBW of 57 nm
FWHM of 70 nm

Available on

FF01-650/54-25

FL-003710 / 0

• T_avg > 90% 623 – 677 nm
• Center Wavelength of 650 nm and GMBW of 54 nm
• FWHM of 64.9 nm

Available on

FF01-650/60-25

FL-004425 / 0

T_avg > 95% 620 – 680 nm
Center Wavelength of 650 nm and GMBW of 60 nm
FWHM of 66.5 nm

Available on

BLP01-664R-25

FL-008527 / 0

Filter with 50% edge at 677 nm
367 cm^-1 transition
T_avg > 93% from 682.6 – 1200 nm

Available on

BSP01-633R-25

FL-008495 / 0

Laser Wavelength = 632.8 nm
Filter 50% edge at 621.8 nm
385 cm^-1 transition
T_avg > 80% 350 – 400 nm
T_avg > 93% 400 – 615.1 nm

Available on

FF635-Di01-25x36

FL-006868 / 0

Dichroic Beamsplitter with edge at 635 nm
R_avg > 94% 507 – 622 nm
T_avg > 90% 636 – 830 nm
Flatness / RWE: Standard Epi-fluorescence

Available on

FF665-Di02-25x36

FL-007042 / 0

Dichroic Beamsplitter with edge at 665 nm
R_avg > 98% 350 – 650 nm
T_avg > 93% 680 – 1600 nm
T_{avg p-pol} > 90% 680 – 1600 nm
T_{avg s-pol} > 90% 680 – 1600 nm

Flatness / RWE: Standard Epi-fluorescence

1 of 1

Page Size

Topic	Description
Cleaning Optical Filters	Instructions for cleaning hard coated optical filters
Filter Reliability	Compares the performance and reliability of hard coated filters to traditional soft-coated filters and provides information about the testing standards for Semrock filters
Working with Optical Density	Tables to describe the relationship between OD and transmission with tips for quickly calculating OD

Optical Specifications: Value
Transmission Band 1: Tavg > 93% 643 – 656 nm
Blocking Band 1: ODavg > 5 200 – 275 nm (Design specification - measurements are noise-floor limited).
Blocking Band 2: ODavg > 5 275 – 623.5 nm
Blocking Band 3: ODavg > 10 677 – 722 nm (Design specification - measurements are noise-floor limited).
Blocking Band 4: ODavg > 5 722 – 925 nm
Center Wavelength 1: 650 nm
Guaranteed Minimum Bandwidth 1: 13 nm
FWHM Bandwidth 1 (nominal): 20.1 nm
General Filter Specifications: Value
Angle of Incidence: 0 ± 5 degrees
Cone Half-angle: 7 degrees
Optical Damage Rating: Testing has proven to show no signs of degradation when exposed to at least 6.0 W of power from an unfiltered xenon arc lamp over a 25 mm diameter (corresponding to 1.2 W/cm2) for over 500 hours.
Physical Filter Specifications: Value
Transverse Dimensions (diameter): 25 mm
Transverse Tolerance: + 0.0 / - 0.1 mm
Filter Thickness (mounted): 5.0 mm
Filter Thickness Tolerance (mounted): ± 0.1 mm
Clear Aperture: ≥ 21 mm
Scratch-Dig: 60-40
Filter Thickness (unmounted): 2.0 mm
Filter Thickness Tolerance (unmounted): ± 0.1 mm
Orientation: Arrow on ring indicates preferred direction of propagation of light

total selected Clear selection Select all 9 products from all pages.

Available on

FF01-440/521/607/700-25

FL-004445 / 0

T_avg > 90% 420 – 460 nm, T_avg > 90% 510.5 – 531.5 nm, T_avg > 90% 590 – 624 nm & T_avg > 90% 677.5 – 722.5 nm
Center Wavelengths of 440 nm, 521 nm, 607 nm & 700 nm and GMBWs of 40 nm, 21 nm, 34 nm & 45 nm

Available on

FF410/504/582/669-Di01-25x36

FL-007087 / 0

Dichroic Beamsplitter with edges at 410 nm, 504 nm, 582 nm & 669 nm
R_avg > 95% 381.5 – 392.5 nm, R_avg > 95% 475 – 495 nm, R_avg > 95% 547 – 572 nm & R_avg > 95% 643 – 656 nm
T_avg > 90% 420 – 460 nm, T_avg > 90% 510 – 531 nm, T_avg > 90% 589.5 – 623.5 nm & T_avg > 90% 677 – 722 nm

Available on

FF01-647/57-25

FL-004142 / 0

T_avg > 92% 618.5 – 675.5 nm
Center Wavelength of 647 nm and GMBW of 57 nm
FWHM of 70 nm

Available on

FF01-650/54-25

FL-003710 / 0

• T_avg > 90% 623 – 677 nm
• Center Wavelength of 650 nm and GMBW of 54 nm
• FWHM of 64.9 nm

Available on

FF01-650/60-25

FL-004425 / 0

T_avg > 95% 620 – 680 nm
Center Wavelength of 650 nm and GMBW of 60 nm
FWHM of 66.5 nm

Available on

BLP01-664R-25

FL-008527 / 0

Filter with 50% edge at 677 nm
367 cm^-1 transition
T_avg > 93% from 682.6 – 1200 nm

Available on

BSP01-633R-25

FL-008495 / 0

Laser Wavelength = 632.8 nm
Filter 50% edge at 621.8 nm
385 cm^-1 transition
T_avg > 80% 350 – 400 nm
T_avg > 93% 400 – 615.1 nm

Available on

FF635-Di01-25x36

FL-006868 / 0

Dichroic Beamsplitter with edge at 635 nm
R_avg > 94% 507 – 622 nm
T_avg > 90% 636 – 830 nm
Flatness / RWE: Standard Epi-fluorescence

Available on

FF665-Di02-25x36

FL-007042 / 0

Dichroic Beamsplitter with edge at 665 nm
R_avg > 98% 350 – 650 nm
T_avg > 93% 680 – 1600 nm
T_{avg p-pol} > 90% 680 – 1600 nm
T_{avg s-pol} > 90% 680 – 1600 nm

Flatness / RWE: Standard Epi-fluorescence

1 of 1

Page Size

Topic	Description
Cleaning Optical Filters	Instructions for cleaning hard coated optical filters
Filter Reliability	Compares the performance and reliability of hard coated filters to traditional soft-coated filters and provides information about the testing standards for Semrock filters
Working with Optical Density	Tables to describe the relationship between OD and transmission with tips for quickly calculating OD

Recently Viewed

View All