609/54 nm BrightLine^® single-band bandpass filter

Semrock Part Number: FF01-609/54-25

IDEX Part Number: FL-004693 /

Optical Specifications	Value
Transmission Band 1	Tavg > 93% 582 – 636 nm
Blocking Band 1	ODavg > 4 200 – 400 nm
Blocking Band 2	ODavg > 4 400 – 554 nm
Blocking Band 3	ODavg > 8 554 – 568 nm (Design specification - measurements are noise-floor limited).
Blocking Band 4	OD > 3.5 575 nm
Blocking Band 5	ODavg > 5 655 – 700 nm
Blocking Band 6	ODavg > 5 700 – 925 nm
Center Wavelength 1	609 nm
Guaranteed Minimum Bandwidth 1	54 nm
FWHM Bandwidth 1 (nominal)	60.6 nm
General Filter Specifications	Value
Angle of Incidence	0 ± 5 degrees
Cone Half-angle	7 degrees
Optical Damage Rating	Testing has proven to show no signs of degradation when exposed to at least 6.0 W of power from an unfiltered xenon arc lamp over a 25 mm diameter (corresponding to 1.2 W/cm2) for over 500 hours.
Physical Filter Specifications	Value
Transverse Dimensions (diameter)	25 mm
Transverse Tolerance	+ 0.0 / – 0.1 mm
Filter Thickness (mounted)	3.5 mm
Filter Thickness Tolerance (mounted)	± 0.1 mm
Clear Aperture	≥ 22 mm
Scratch-Dig	60-40
Filter Thickness (unmounted)	2.0 mm
Filter Thickness Tolerance (unmounted)	± 0.1 mm
Orientation	Arrow on ring indicates preferred direction of propagation of light

total selected Clear selection Select all 8 products from all pages.

Available on

FF01-554/23-25

FL-004612 / 0

T_avg > 93% 543.0 – 566.0 nm
Center Wavelength of 554.5 nm and GMBW of 23.0 nm
FWHM of 28.1 nm

Available on

FF573-Di01-25x36

FL-007123 / 0

Dichroic Beamsplitter with edge at 573 nm
R_avg > 98% 350 – 543 nm
T_avg > 93% 580 – 636 nm
Flatness / RWE: Standard Epi-fluorescence

Available on

FF01-607/70-25

FL-004176 / 0

T_avg > 92% 572 – 642 nm
Center Wavelength of 607 nm and GMBW of 70 nm
FWHM of 80 nm

Available on

FF01-609/57-25

FL-003289 / 0

T_avg > 94% 580.5 – 637.5 nm
Center Wavelength of 609 nm and GMBW of 57 nm
FWHM of 59.0 nm

Available on

FF01-609/181-25

FL-003418 / 0

T_avg > 93% 519 – 700 nm
Center Wavelength of 609 nm and GMBW of 181 nm
FWHM of 190.5 nm

Available on

BLP01-635R-25

FL-008533 / 0

Filter with 50% edge at 655 nm
380 cm^-1 transition
T_avg > 93% from 660 – 1200 nm

Available on

BSP01-532R-25

FL-008528 / 0

Laser Wavelength = 532 nm
Filter 50% edge at 522.7 nm
458 cm^-1 transition
T_avg > 80% 350 – 400 nm
T_avg > 93% 400 – 517.1 nm

Available on

FF649-Di01-25x36

FL-007061 / 0

Dichroic Beamsplitter with edge at 649 nm
R_avg > 98% 500 – 642 nm
T_avg > 90% 654 – 825 nm
Flatness / RWE: Standard Epi-fluorescence

1 of 1

Page Size

Topic	Description
Cleaning Optical Filters	Instructions for cleaning hard coated optical filters
Filter Reliability	Compares the performance and reliability of hard coated filters to traditional soft-coated filters and provides information about the testing standards for Semrock filters
Working with Optical Density	Tables to describe the relationship between OD and transmission with tips for quickly calculating OD

Optical Specifications: Value
Transmission Band 1: Tavg > 93% 582 – 636 nm
Blocking Band 1: ODavg > 4 200 – 400 nm
Blocking Band 2: ODavg > 4 400 – 554 nm
Blocking Band 3: ODavg > 8 554 – 568 nm (Design specification - measurements are noise-floor limited).
Blocking Band 4: OD > 3.5 575 nm
Blocking Band 5: ODavg > 5 655 – 700 nm
Blocking Band 6: ODavg > 5 700 – 925 nm
Center Wavelength 1: 609 nm
Guaranteed Minimum Bandwidth 1: 54 nm
FWHM Bandwidth 1 (nominal): 60.6 nm
General Filter Specifications: Value
Angle of Incidence: 0 ± 5 degrees
Cone Half-angle: 7 degrees
Optical Damage Rating: Testing has proven to show no signs of degradation when exposed to at least 6.0 W of power from an unfiltered xenon arc lamp over a 25 mm diameter (corresponding to 1.2 W/cm2) for over 500 hours.
Physical Filter Specifications: Value
Transverse Dimensions (diameter): 25 mm
Transverse Tolerance: + 0.0 / – 0.1 mm
Filter Thickness (mounted): 3.5 mm
Filter Thickness Tolerance (mounted): ± 0.1 mm
Clear Aperture: ≥ 22 mm
Scratch-Dig: 60-40
Filter Thickness (unmounted): 2.0 mm
Filter Thickness Tolerance (unmounted): ± 0.1 mm
Orientation: Arrow on ring indicates preferred direction of propagation of light

total selected Clear selection Select all 8 products from all pages.

Available on

FF01-554/23-25

FL-004612 / 0

T_avg > 93% 543.0 – 566.0 nm
Center Wavelength of 554.5 nm and GMBW of 23.0 nm
FWHM of 28.1 nm

Available on

FF573-Di01-25x36

FL-007123 / 0

Dichroic Beamsplitter with edge at 573 nm
R_avg > 98% 350 – 543 nm
T_avg > 93% 580 – 636 nm
Flatness / RWE: Standard Epi-fluorescence

Available on

FF01-607/70-25

FL-004176 / 0

T_avg > 92% 572 – 642 nm
Center Wavelength of 607 nm and GMBW of 70 nm
FWHM of 80 nm

Available on

FF01-609/57-25

FL-003289 / 0

T_avg > 94% 580.5 – 637.5 nm
Center Wavelength of 609 nm and GMBW of 57 nm
FWHM of 59.0 nm

Available on

FF01-609/181-25

FL-003418 / 0

T_avg > 93% 519 – 700 nm
Center Wavelength of 609 nm and GMBW of 181 nm
FWHM of 190.5 nm

Available on

BLP01-635R-25

FL-008533 / 0

Filter with 50% edge at 655 nm
380 cm^-1 transition
T_avg > 93% from 660 – 1200 nm

Available on

BSP01-532R-25

FL-008528 / 0

Laser Wavelength = 532 nm
Filter 50% edge at 522.7 nm
458 cm^-1 transition
T_avg > 80% 350 – 400 nm
T_avg > 93% 400 – 517.1 nm

Available on

FF649-Di01-25x36

FL-007061 / 0

Dichroic Beamsplitter with edge at 649 nm
R_avg > 98% 500 – 642 nm
T_avg > 90% 654 – 825 nm
Flatness / RWE: Standard Epi-fluorescence

1 of 1

Page Size

Topic	Description
Cleaning Optical Filters	Instructions for cleaning hard coated optical filters
Filter Reliability	Compares the performance and reliability of hard coated filters to traditional soft-coated filters and provides information about the testing standards for Semrock filters
Working with Optical Density	Tables to describe the relationship between OD and transmission with tips for quickly calculating OD

Recently Viewed

View All