578/21 nm BrightLine^® single-band bandpass filter

Semrock Part Number: FF01-578/21-25

IDEX Part Number: FL-004616 /

Optical Specifications	Value
Transmission Band 1	Tavg > 93% 567.4 – 588.6 nm
Blocking Band 1	ODavg > 5 200 – 275 nm (Design specification - measurements are noise-floor limited).
Blocking Band 2	ODavg > 5 275 – 300 nm
Blocking Band 3	ODavg > 6 300 – 554 nm
Blocking Band 4	ODavg > 8 464 – 486 nm (Design specification - measurements are noise-floor limited)
Blocking Band 5	ODavg > 8 532 – 554 nm (Design specification - measurements are noise-floor limited)
Blocking Band 6	OD > 3.5 560.7 nm
Blocking Band 7	OD > 3.5 595.8 nm
Blocking Band 8	ODavg > 8 603 – 800 nm (Design specification - measurements are noise-floor limited)
Blocking Band 9	ODavg > 6 800 – 850 nm
Blocking Band 10	ODavg > 4 850 – 925 nm
Blocking Band 11	ODavg > 2 925 – 1100 nm
Center Wavelength 1	578 nm
Guaranteed Minimum Bandwidth 1	21.2 nm
FWHM Bandwidth 1 (nominal)	26.1 nm
General Filter Specifications	Value
Angle of Incidence	0 ± 5 degrees
Cone Half-angle	7 degrees
Optical Damage Rating	Testing has proven to show no signs of degradation when exposed to at least 6.0 W of power from an unfiltered xenon arc lamp over a 25 mm diameter (corresponding to 1.2 W/cm2) for over 500 hours.
Physical Filter Specifications	Value
Transverse Dimensions (diameter)	25 mm
Transverse Tolerance	+ 0.0 / – 0.1 mm
Filter Thickness (mounted)	5.0 mm
Filter Thickness Tolerance (mounted)	± 0.1 mm
Clear Aperture	≥ 21 mm
Scratch-Dig	60-40
Filter Thickness (unmounted)	2.0 mm
Filter Thickness Tolerance (unmounted)	± 0.1 mm
Orientation	Arrow on ring indicates preferred direction of propagation of light

total selected Clear selection Select all 8 products from all pages.

Available on

FF02-641/75-25

FL-004436 / 0

T_avg > 93% 604 – 679 nm
Center Wavelength of 641.5 nm and GMBW of 75 nm
FWHM of 81.7 nm

Available on

FF596-Di01-25x36

FL-007156 / 0

Dichroic Beamsplitter with edge at 596 nm
R_avg > 98% 350 – 588.6 nm
T_avg > 93% 603 – 950 nm
Flatness / RWE: Standard Epi-fluorescence

Available on

FF01-576/10-25

FL-004165 / 0

• T_avg > 90% 571 – 581 nm
• Center Wavelength of 576 nm and GMBW of 10 nm
• FWHM of 19.1 nm

Available on

FF01-578/105-25

FL-003197 / 0

T_avg > 90% 525.5 – 630.5 nm
Center Wavelength of 578 nm and GMBW of 105 nm
FWHM of 111.6 nm

Available on

FF01-579/34-25

FL-004556 / 0

T_avg > 90% 562 – 596 nm
Center Wavelength of 579 nm and GMBW of 34 nm
FWHM of 43.5 nm

Available on

BLP01-594R-25

FL-008542 / 0

Filter with 50% edge at 607 nm
411 cm^-1 transition
T_avg > 93% from 610.9 – 900 nm

Available on

BSP01-532R-25

FL-008528 / 0

Laser Wavelength = 532 nm
Filter 50% edge at 522.7 nm
458 cm^-1 transition
T_avg > 80% 350 – 400 nm
T_avg > 93% 400 – 517.1 nm

Available on

FF555-Di03-25x36

FL-007150 / 0

Dichroic Beamsplitter with edge at 555 nm
R_avg > 98% 350 – 547.5 nm
T_avg > 93% 562.5 – 950 nm
Flatness / RWE: Standard Epi-fluorescence

1 of 1

Page Size

Topic	Description
Cleaning Optical Filters	Instructions for cleaning hard coated optical filters
Filter Reliability	Compares the performance and reliability of hard coated filters to traditional soft-coated filters and provides information about the testing standards for Semrock filters
Working with Optical Density	Tables to describe the relationship between OD and transmission with tips for quickly calculating OD

Optical Specifications: Value
Transmission Band 1: Tavg > 93% 567.4 – 588.6 nm
Blocking Band 1: ODavg > 5 200 – 275 nm (Design specification - measurements are noise-floor limited).
Blocking Band 2: ODavg > 5 275 – 300 nm
Blocking Band 3: ODavg > 6 300 – 554 nm
Blocking Band 4: ODavg > 8 464 – 486 nm (Design specification - measurements are noise-floor limited)
Blocking Band 5: ODavg > 8 532 – 554 nm (Design specification - measurements are noise-floor limited)
Blocking Band 6: OD > 3.5 560.7 nm
Blocking Band 7: OD > 3.5 595.8 nm
Blocking Band 8: ODavg > 8 603 – 800 nm (Design specification - measurements are noise-floor limited)
Blocking Band 9: ODavg > 6 800 – 850 nm
Blocking Band 10: ODavg > 4 850 – 925 nm
Blocking Band 11: ODavg > 2 925 – 1100 nm
Center Wavelength 1: 578 nm
Guaranteed Minimum Bandwidth 1: 21.2 nm
FWHM Bandwidth 1 (nominal): 26.1 nm
General Filter Specifications: Value
Angle of Incidence: 0 ± 5 degrees
Cone Half-angle: 7 degrees
Optical Damage Rating: Testing has proven to show no signs of degradation when exposed to at least 6.0 W of power from an unfiltered xenon arc lamp over a 25 mm diameter (corresponding to 1.2 W/cm2) for over 500 hours.
Physical Filter Specifications: Value
Transverse Dimensions (diameter): 25 mm
Transverse Tolerance: + 0.0 / – 0.1 mm
Filter Thickness (mounted): 5.0 mm
Filter Thickness Tolerance (mounted): ± 0.1 mm
Clear Aperture: ≥ 21 mm
Scratch-Dig: 60-40
Filter Thickness (unmounted): 2.0 mm
Filter Thickness Tolerance (unmounted): ± 0.1 mm
Orientation: Arrow on ring indicates preferred direction of propagation of light

total selected Clear selection Select all 8 products from all pages.

Available on

FF02-641/75-25

FL-004436 / 0

T_avg > 93% 604 – 679 nm
Center Wavelength of 641.5 nm and GMBW of 75 nm
FWHM of 81.7 nm

Available on

FF596-Di01-25x36

FL-007156 / 0

Dichroic Beamsplitter with edge at 596 nm
R_avg > 98% 350 – 588.6 nm
T_avg > 93% 603 – 950 nm
Flatness / RWE: Standard Epi-fluorescence

Available on

FF01-576/10-25

FL-004165 / 0

• T_avg > 90% 571 – 581 nm
• Center Wavelength of 576 nm and GMBW of 10 nm
• FWHM of 19.1 nm

Available on

FF01-578/105-25

FL-003197 / 0

T_avg > 90% 525.5 – 630.5 nm
Center Wavelength of 578 nm and GMBW of 105 nm
FWHM of 111.6 nm

Available on

FF01-579/34-25

FL-004556 / 0

T_avg > 90% 562 – 596 nm
Center Wavelength of 579 nm and GMBW of 34 nm
FWHM of 43.5 nm

Available on

BLP01-594R-25

FL-008542 / 0

Filter with 50% edge at 607 nm
411 cm^-1 transition
T_avg > 93% from 610.9 – 900 nm

Available on

BSP01-532R-25

FL-008528 / 0

Laser Wavelength = 532 nm
Filter 50% edge at 522.7 nm
458 cm^-1 transition
T_avg > 80% 350 – 400 nm
T_avg > 93% 400 – 517.1 nm

Available on

FF555-Di03-25x36

FL-007150 / 0

Dichroic Beamsplitter with edge at 555 nm
R_avg > 98% 350 – 547.5 nm
T_avg > 93% 562.5 – 950 nm
Flatness / RWE: Standard Epi-fluorescence

1 of 1

Page Size

Topic	Description
Cleaning Optical Filters	Instructions for cleaning hard coated optical filters
Filter Reliability	Compares the performance and reliability of hard coated filters to traditional soft-coated filters and provides information about the testing standards for Semrock filters
Working with Optical Density	Tables to describe the relationship between OD and transmission with tips for quickly calculating OD

Recently Viewed

View All