561/14 nm BrightLine^® single-band bandpass filter

Semrock Part Number: FF01-561/14-25

IDEX Part Number: FL-004455 /

Optical Specifications	Value
Transmission Band 1	Tavg > 93% 554 – 568 nm
Blocking Band 1	ODavg > 5 200 – 537 nm
Blocking Band 2	OD > 3.5 575 nm
Blocking Band 3	ODavg > 8 582 – 636 nm (Design specification - measurements are noise-floor limited)
Blocking Band 4	ODavg > 5 636 – 700 nm
Blocking Band 5	ODavg > 4 700 – 925 nm
Blocking Band 6	ODavg > 2 925 – 1100 nm
Center Wavelength 1	561 nm
Guaranteed Minimum Bandwidth 1	14 nm
FWHM Bandwidth 1 (nominal)	20.8 nm
General Filter Specifications	Value
Angle of Incidence	0 ± 5 degrees
Cone Half-angle	7 degrees
Optical Damage Rating	Testing has proven to show no signs of degradation when exposed to at least 6.0 W of power from an unfiltered xenon arc lamp over a 25 mm diameter (corresponding to 1.2 W/cm2) for over 500 hours.
Physical Filter Specifications	Value
Transverse Dimensions (diameter)	25 mm
Transverse Tolerance	+ 0.0 / – 0.1 mm
Filter Thickness (mounted)	5.0 mm
Filter Thickness Tolerance (mounted)	± 0.1 mm
Clear Aperture	≥ 21 mm
Scratch-Dig	60-40
Filter Thickness (unmounted)	2.0 mm
Filter Thickness Tolerance (unmounted)	± 0.1 mm
Orientation	Arrow on ring indicates preferred direction of propagation of light

total selected Clear selection Select all 8 products from all pages.

Available on

FF01-609/54-25

FL-004693 / 0

T_avg > 93% 582 – 636 nm
Center Wavelength of 609 nm and GMBW of 54 nm
FWHM of 60.6 nm

Available on

Di02-R561-25x36

FL-007137 / 0

Laser Dichroic Beamsplitter with edge at 573 nm
R_abs > 94% 554 – 568.2 nm
R_avg > 90% 350 – 554 nm
T_avg > 93% 582.4 – 1200 nm
Flatness / RWE: Laser

Available on

FF01-561/4-25

FL-003822 / 0

T_avg > 93% 559 – 563 nm
Center Wavelength of 561 nm and GMBW of 4 nm
FWHM of 7.2 nm

Available on

FF01-562/40-25

FL-004456 / 0

T_avg > 93% 542 – 582 nm
Center Wavelength of 562 nm and GMBW of 40 nm
FWHM of 45.5 nm

Available on

FF01-563/9-25

FL-004686 / 0

T_avg > 93% 559 – 568 nm
Center Wavelength of 563.5 nm and GMBW of 9 nm
FWHM of 14.5 nm

Available on

BLP02-561R-25

FL-008551 / 0

Filter with 50% edge at 572 nm
434.5 cm^-1 transition
T_avg > 93% from 577.1 – 900 nm

Available on

BSP01-532R-25

FL-008528 / 0

Laser Wavelength = 532 nm
Filter 50% edge at 522.7 nm
458 cm^-1 transition
T_avg > 80% 350 – 400 nm
T_avg > 93% 400 – 517.1 nm

Available on

FF538-FDi01-25x36

FL-007120 / 0

Imaging Dichroic Beamsplitter with edge at 538 nm
R_avg > 95% 350 – 528.4 nm
T_avg > 93% 547.7 – 950 nm
Common Fluorophore Pair to Split: GFP/mOrange
Flatness / RWE: Image-splitting

1 of 1

Page Size

Topic	Description
Cleaning Optical Filters	Instructions for cleaning hard coated optical filters
Filter Reliability	Compares the performance and reliability of hard coated filters to traditional soft-coated filters and provides information about the testing standards for Semrock filters
Working with Optical Density	Tables to describe the relationship between OD and transmission with tips for quickly calculating OD

Optical Specifications: Value
Transmission Band 1: Tavg > 93% 554 – 568 nm
Blocking Band 1: ODavg > 5 200 – 537 nm
Blocking Band 2: OD > 3.5 575 nm
Blocking Band 3: ODavg > 8 582 – 636 nm (Design specification - measurements are noise-floor limited)
Blocking Band 4: ODavg > 5 636 – 700 nm
Blocking Band 5: ODavg > 4 700 – 925 nm
Blocking Band 6: ODavg > 2 925 – 1100 nm
Center Wavelength 1: 561 nm
Guaranteed Minimum Bandwidth 1: 14 nm
FWHM Bandwidth 1 (nominal): 20.8 nm
General Filter Specifications: Value
Angle of Incidence: 0 ± 5 degrees
Cone Half-angle: 7 degrees
Optical Damage Rating: Testing has proven to show no signs of degradation when exposed to at least 6.0 W of power from an unfiltered xenon arc lamp over a 25 mm diameter (corresponding to 1.2 W/cm2) for over 500 hours.
Physical Filter Specifications: Value
Transverse Dimensions (diameter): 25 mm
Transverse Tolerance: + 0.0 / – 0.1 mm
Filter Thickness (mounted): 5.0 mm
Filter Thickness Tolerance (mounted): ± 0.1 mm
Clear Aperture: ≥ 21 mm
Scratch-Dig: 60-40
Filter Thickness (unmounted): 2.0 mm
Filter Thickness Tolerance (unmounted): ± 0.1 mm
Orientation: Arrow on ring indicates preferred direction of propagation of light

total selected Clear selection Select all 8 products from all pages.

Available on

FF01-609/54-25

FL-004693 / 0

T_avg > 93% 582 – 636 nm
Center Wavelength of 609 nm and GMBW of 54 nm
FWHM of 60.6 nm

Available on

Di02-R561-25x36

FL-007137 / 0

Laser Dichroic Beamsplitter with edge at 573 nm
R_abs > 94% 554 – 568.2 nm
R_avg > 90% 350 – 554 nm
T_avg > 93% 582.4 – 1200 nm
Flatness / RWE: Laser

Available on

FF01-561/4-25

FL-003822 / 0

T_avg > 93% 559 – 563 nm
Center Wavelength of 561 nm and GMBW of 4 nm
FWHM of 7.2 nm

Available on

FF01-562/40-25

FL-004456 / 0

T_avg > 93% 542 – 582 nm
Center Wavelength of 562 nm and GMBW of 40 nm
FWHM of 45.5 nm

Available on

FF01-563/9-25

FL-004686 / 0

T_avg > 93% 559 – 568 nm
Center Wavelength of 563.5 nm and GMBW of 9 nm
FWHM of 14.5 nm

Available on

BLP02-561R-25

FL-008551 / 0

Filter with 50% edge at 572 nm
434.5 cm^-1 transition
T_avg > 93% from 577.1 – 900 nm

Available on

BSP01-532R-25

FL-008528 / 0

Laser Wavelength = 532 nm
Filter 50% edge at 522.7 nm
458 cm^-1 transition
T_avg > 80% 350 – 400 nm
T_avg > 93% 400 – 517.1 nm

Available on

FF538-FDi01-25x36

FL-007120 / 0

Imaging Dichroic Beamsplitter with edge at 538 nm
R_avg > 95% 350 – 528.4 nm
T_avg > 93% 547.7 – 950 nm
Common Fluorophore Pair to Split: GFP/mOrange
Flatness / RWE: Image-splitting

1 of 1

Page Size

Topic	Description
Cleaning Optical Filters	Instructions for cleaning hard coated optical filters
Filter Reliability	Compares the performance and reliability of hard coated filters to traditional soft-coated filters and provides information about the testing standards for Semrock filters
Working with Optical Density	Tables to describe the relationship between OD and transmission with tips for quickly calculating OD

Recently Viewed

View All