560/14 nm BrightLine^® single-band bandpass filter

Semrock Part Number: FF01-560/14-25

IDEX Part Number: FL-004489 /

Optical Specifications	Value
Transmission Band 1	Tavg > 93% 553 – 567 nm
Blocking Band 1	ODavg > 5 300 - 538 nm
Blocking Band 2	ODavg > 8 405 - 522 nm (Design specification - measurements are noise-floor limited)
Blocking Band 3	ODabs > 3.5 @ 541.5 nm
Blocking Band 4	ODavg > 5 584 - 1050 nm
Center Wavelength 1	560 nm
Guaranteed Minimum Bandwidth 1	14 nm
FWHM Bandwidth 1 (nominal)	20 nm
General Filter Specifications	Value
Angle of Incidence	0 ± 5 degrees
Cone Half-angle	7 degrees
Optical Damage Rating	Testing has proven to show no signs of degradation when exposed to at least 6.0 W of power from an unfiltered xenon arc lamp over a 25 mm diameter (corresponding to 1.2 W/cm2) for over 500 hours.
Physical Filter Specifications	Value
Transverse Dimensions (diameter)	25 mm
Transverse Tolerance	+ 0.0 / – 0.1 mm
Filter Thickness (mounted)	5.0 mm
Filter Thickness Tolerance (mounted)	± 0.1 mm
Clear Aperture	≥ 21 mm
Scratch-Dig	60-40
Filter Thickness (unmounted)	2.0 mm
Filter Thickness Tolerance (unmounted)	± 0.1 mm
Orientation	Arrow on ring indicates preferred direction of propagation of light

total selected Clear selection Select all 7 products from all pages.

Available on

FF01-559/34-25

FL-004553 / 0

T_avg > 90% 541.8 – 576.2 nm
Center Wavelength of 559 nm and GMBW of 34.4 nm
FWHM of 40 nm

Available on

FF01-560/25-25

FL-004490 / 0

T_avg > 93% 547 – 572 nm
Center Wavelength of 559.5 nm and GMBW of 25 nm
FWHM of 32.3 nm

Available on

FF01-561/4-25

FL-003822 / 0

T_avg > 93% 559 – 563 nm
Center Wavelength of 561 nm and GMBW of 4 nm
FWHM of 7.2 nm

Available on

BLP01-568R-25

FL-008484 / 0

Filter with 50% edge at 579 nm
429 cm^-1 transition
T_avg > 93% from 584.1 – 900 nm

Available on

BSP01-532R-25

FL-008528 / 0

Laser Wavelength = 532 nm
Filter 50% edge at 522.7 nm
458 cm^-1 transition
T_avg > 80% 350 – 400 nm
T_avg > 93% 400 – 517.1 nm

Available on

FF538-FDi01-25x36

FL-007120 / 0

Imaging Dichroic Beamsplitter with edge at 538 nm
R_avg > 95% 350 – 528.4 nm
T_avg > 93% 547.7 – 950 nm
Common Fluorophore Pair to Split: GFP/mOrange
Flatness / RWE: Image-splitting

Available on

Di02-R561-25x36

FL-007137 / 0

Laser Dichroic Beamsplitter with edge at 573 nm
R_abs > 94% 554 – 568.2 nm
R_avg > 90% 350 – 554 nm
T_avg > 93% 582.4 – 1200 nm
Flatness / RWE: Laser

1 of 1

Page Size

Topic	Description
Cleaning Optical Filters	Instructions for cleaning hard coated optical filters
Filter Reliability	Compares the performance and reliability of hard coated filters to traditional soft-coated filters and provides information about the testing standards for Semrock filters
Working with Optical Density	Tables to describe the relationship between OD and transmission with tips for quickly calculating OD

Optical Specifications: Value
Transmission Band 1: Tavg > 93% 553 – 567 nm
Blocking Band 1: ODavg > 5 300 - 538 nm
Blocking Band 2: ODavg > 8 405 - 522 nm (Design specification - measurements are noise-floor limited)
Blocking Band 3: ODabs > 3.5 @ 541.5 nm
Blocking Band 4: ODavg > 5 584 - 1050 nm
Center Wavelength 1: 560 nm
Guaranteed Minimum Bandwidth 1: 14 nm
FWHM Bandwidth 1 (nominal): 20 nm
General Filter Specifications: Value
Angle of Incidence: 0 ± 5 degrees
Cone Half-angle: 7 degrees
Optical Damage Rating: Testing has proven to show no signs of degradation when exposed to at least 6.0 W of power from an unfiltered xenon arc lamp over a 25 mm diameter (corresponding to 1.2 W/cm2) for over 500 hours.
Physical Filter Specifications: Value
Transverse Dimensions (diameter): 25 mm
Transverse Tolerance: + 0.0 / – 0.1 mm
Filter Thickness (mounted): 5.0 mm
Filter Thickness Tolerance (mounted): ± 0.1 mm
Clear Aperture: ≥ 21 mm
Scratch-Dig: 60-40
Filter Thickness (unmounted): 2.0 mm
Filter Thickness Tolerance (unmounted): ± 0.1 mm
Orientation: Arrow on ring indicates preferred direction of propagation of light

total selected Clear selection Select all 7 products from all pages.

Available on

FF01-559/34-25

FL-004553 / 0

T_avg > 90% 541.8 – 576.2 nm
Center Wavelength of 559 nm and GMBW of 34.4 nm
FWHM of 40 nm

Available on

FF01-560/25-25

FL-004490 / 0

T_avg > 93% 547 – 572 nm
Center Wavelength of 559.5 nm and GMBW of 25 nm
FWHM of 32.3 nm

Available on

FF01-561/4-25

FL-003822 / 0

T_avg > 93% 559 – 563 nm
Center Wavelength of 561 nm and GMBW of 4 nm
FWHM of 7.2 nm

Available on

BLP01-568R-25

FL-008484 / 0

Filter with 50% edge at 579 nm
429 cm^-1 transition
T_avg > 93% from 584.1 – 900 nm

Available on

BSP01-532R-25

FL-008528 / 0

Laser Wavelength = 532 nm
Filter 50% edge at 522.7 nm
458 cm^-1 transition
T_avg > 80% 350 – 400 nm
T_avg > 93% 400 – 517.1 nm

Available on

FF538-FDi01-25x36

FL-007120 / 0

Imaging Dichroic Beamsplitter with edge at 538 nm
R_avg > 95% 350 – 528.4 nm
T_avg > 93% 547.7 – 950 nm
Common Fluorophore Pair to Split: GFP/mOrange
Flatness / RWE: Image-splitting

Available on

Di02-R561-25x36

FL-007137 / 0

Laser Dichroic Beamsplitter with edge at 573 nm
R_abs > 94% 554 – 568.2 nm
R_avg > 90% 350 – 554 nm
T_avg > 93% 582.4 – 1200 nm
Flatness / RWE: Laser

1 of 1

Page Size

Topic	Description
Cleaning Optical Filters	Instructions for cleaning hard coated optical filters
Filter Reliability	Compares the performance and reliability of hard coated filters to traditional soft-coated filters and provides information about the testing standards for Semrock filters
Working with Optical Density	Tables to describe the relationship between OD and transmission with tips for quickly calculating OD

Recently Viewed

View All