554/23 nm BrightLine® single-band bandpass filter

Semrock Part Number: FF01-554/23-25

IDEX Part Number: FL-004612  /

Semrock
Individual fluorescence bandpass filters that have been optimized for use in a variety of fluorescence instruments. All thin-film, hard-coated construction for unsurpassed performance and reliability.
  • Price Not Available.
  • Each
    US Domestic pricing – contact your local distributor for other currency list prices
  • Price Not Available.
  • 375.00 USD Each
    US Domestic pricing – contact your local distributor for other currency list prices
  • 0.00
    0.00
  • Notify me when available
Optical Specifications Value
Transmission Band 1 Tavg > 93% 543.0 – 566.0 nm
Blocking Band 1   ODavg > 5 200 – 300 nm (Design specification - measurements are noise-floor limited).
Blocking Band 2 ODavg > 6 300 – 530 nm
Blocking Band 3   ODavg > 8 414 – 450 nm (Design specification - measurements are noise-floor limited)
Blocking Band 4   ODavg > 8 499.5 – 530 nm (Design specification - measurements are noise-floor limited)
Blocking Band 5 OD > 3.5 536.5 nm
Blocking Band 6 OD > 3.5 573 nm
Blocking Band 7   ODavg > 8 580 – 611 nm (Design specification - measurements are noise-floor limited)
Blocking Band 8   ODavg > 8 659.5 – 800 nm (Design specification - measurements are noise-floor limited)
Blocking Band 9 ODavg > 6 611 – 850 nm
Blocking Band 10 ODavg > 4 850 – 925 nm
Blocking Band 11 ODavg > 2 925 – 1100 nm
Center Wavelength 1 554.5 nm
Guaranteed Minimum Bandwidth 1 23 nm
FWHM Bandwidth 1 (nominal) 28.1 nm
General Filter Specifications Value
Angle of Incidence 0 ± 5 degrees
Cone Half-angle 7 degrees
Optical Damage Rating Testing has proven to show no signs of degradation when exposed to at least 6.0 W of power from an unfiltered xenon arc lamp over a 25 mm diameter (corresponding to 1.2 W/cm2) for over 500 hours.
Physical Filter Specifications   Value
Transverse Dimensions (diameter) 25 mm
Transverse Tolerance + 0.0 / – 0.1 mm
Filter Thickness (mounted) 5.0 mm
Filter Thickness Tolerance (mounted) ± 0.1 mm
Clear Aperture ≥ 21 mm
Scratch-Dig 60-40
Filter Thickness (unmounted) 2.0 mm
Filter Thickness Tolerance (unmounted) ± 0.1 mm
Orientation Arrow on ring indicates preferred direction of propagation of light

FF01-609/54-25

FL-004693 / 0

Out of Stock Backordered In Stock
  • Tavg > 93% 582 – 636 nm
  • Center Wavelength of 609 nm and GMBW of 54 nm
  • FWHM of 60.6 nm

FF573-Di01-25x36

FL-007123 / 0

Out of Stock Backordered In Stock
  • Dichroic Beamsplitter with edge at 573 nm
  • Ravg > 98% 350 – 543 nm
  • Tavg > 93% 580 – 636 nm
  •  Flatness / RWE: Standard Epi-fluorescence

FF01-550/200-25

FL-003510 / 0

Out of Stock Backordered In Stock
  • Tavg > 90% 450 – 650 nm
  • Center Wavelength of 550 nm and GMBW of 200 nm
  • FWHM of 210.3 nm

FF01-556/20-25

FL-004552 / 0

Out of Stock Backordered In Stock
  • Tavg > 93% 546 – 566 nm
  • Center Wavelength of 556 nm and GMBW of 20 nm
  • FWHM of 25 nm

FF01-558/20-25

FL-004613 / 0

Out of Stock Backordered In Stock
  • Tavg > 90% 548 – 568 nm
  • Center Wavelength of 558 nm and GMBW of 20 nm
  • FWHM of 25.1 nm

BLP01-568R-25

FL-008484 / 0

Out of Stock Backordered In Stock
  • Filter with 50% edge at 579 nm
  • 429 cm-1 transition
  • Tavg > 93% from 584.1 – 900 nm

BSP01-532R-25

FL-008528 / 0

Out of Stock Backordered In Stock
  • Laser Wavelength = 532 nm
  • Filter 50% edge at 522.7 nm
  • 458 cm-1 transition
  • Tavg > 80% 350 – 400 nm
  • Tavg > 93% 400 – 517.1 nm

Di03-R532-t1-25x36

FL-007081 / 0

Out of Stock Backordered In Stock
  • Laser Dichroic Beamsplitter with edge at 538.4 nm
  • Rabs > 94% 514 – 532 nm
  • Ravg > 90% 350 – 514 nm
  • Tavg > 93% 541.6 – 1200 nm
  • Flatness / RWE: Super-resolution / TIRF