550/88 nm BrightLine^® single-band bandpass filter

Semrock Part Number: FF01-550/88-25

IDEX Part Number: FL-003868 /

Optical Specifications	Value
Transmission Band 1	Tavg > 92% 506 – 594 nm
Blocking Band 1	ODavg > 5 200 – 275 nm (Design specification - measurements are noise-floor limited).
Blocking Band 2	ODavg > 5 275 – 490 nm
Blocking Band 3	ODabs > 3.3 490 – 495 nm
Blocking Band 4	ODabs > 3.3 610 – 615 nm
Blocking Band 5	ODavg > 5 615 – 950 nm
Center Wavelength 1	550 nm
Guaranteed Minimum Bandwidth 1	88 nm
FWHM Bandwidth 1 (nominal)	100 nm
General Filter Specifications	Value
Angle of Incidence	0 ± 5 degrees
Cone Half-angle	7 degrees
Optical Damage Rating	Testing has proven to show no signs of degradation when exposed to at least 6.0 W of power from an unfiltered xenon arc lamp over a 25 mm diameter (corresponding to 1.2 W/cm2) for over 500 hours.
Physical Filter Specifications	Value
Transverse Dimensions (diameter)	25 mm
Transverse Tolerance	+ 0.0 / – 0.1 mm
Filter Thickness (mounted)	3.5 mm
Filter Thickness Tolerance (mounted)	± 0.1 mm
Clear Aperture	≥ 22 mm
Scratch-Dig	60-40
Filter Thickness (unmounted)	2.0 mm
Filter Thickness Tolerance (unmounted)	± 0.1 mm
Orientation	Arrow on ring indicates preferred direction of propagation of light

total selected Clear selection Select all 7 products from all pages.

Available on

FF01-550/49-25

FL-004611 / 0

T_avg > 90% 525.5 – 574.5 nm
Center Wavelength of 550 nm and GMBW of 49 nm
FWHM of 55.3 nm

Available on

FF01-550/200-25

FL-003510 / 0

T_avg > 90% 450 – 650 nm
Center Wavelength of 550 nm and GMBW of 200 nm
FWHM of 210.3 nm

Available on

FF01-554/23-25

FL-004612 / 0

T_avg > 93% 543.0 – 566.0 nm
Center Wavelength of 554.5 nm and GMBW of 23.0 nm
FWHM of 28.1 nm

Available on

BLP01-594R-25

FL-008542 / 0

Filter with 50% edge at 607 nm
411 cm^-1 transition
T_avg > 93% from 610.9 – 900 nm

Available on

FF01-492/SP-25

FL-009652 / 0

Filter with 50% edge at 483 nm
T_avg > 93% 400 – 480 nm

Available on

FF495-Di03-25x36

FL-007145 / 0

Dichroic Beamsplitter with edge at 495 nm
R_avg > 98% 350 – 487.5 nm
T_avg > 93% 502.5 – 950 nm
Flatness / RWE: Standard Epi-fluorescence

Available on

FF605-Di02-25x36

FL-007126 / 0

Dichroic Beamsplitter with edge at 605 nm
R_avg > 98% 350 – 596 nm
T_avg > 93% 612 – 950 nm
Flatness / RWE: Standard Epi-fluorescence

1 of 1

Page Size

Topic	Description
Cleaning Optical Filters	Instructions for cleaning hard coated optical filters
Filter Reliability	Compares the performance and reliability of hard coated filters to traditional soft-coated filters and provides information about the testing standards for Semrock filters
Working with Optical Density	Tables to describe the relationship between OD and transmission with tips for quickly calculating OD

Optical Specifications: Value
Transmission Band 1: Tavg > 92% 506 – 594 nm
Blocking Band 1: ODavg > 5 200 – 275 nm (Design specification - measurements are noise-floor limited).
Blocking Band 2: ODavg > 5 275 – 490 nm
Blocking Band 3: ODabs > 3.3 490 – 495 nm
Blocking Band 4: ODabs > 3.3 610 – 615 nm
Blocking Band 5: ODavg > 5 615 – 950 nm
Center Wavelength 1: 550 nm
Guaranteed Minimum Bandwidth 1: 88 nm
FWHM Bandwidth 1 (nominal): 100 nm
General Filter Specifications: Value
Angle of Incidence: 0 ± 5 degrees
Cone Half-angle: 7 degrees
Optical Damage Rating: Testing has proven to show no signs of degradation when exposed to at least 6.0 W of power from an unfiltered xenon arc lamp over a 25 mm diameter (corresponding to 1.2 W/cm2) for over 500 hours.
Physical Filter Specifications: Value
Transverse Dimensions (diameter): 25 mm
Transverse Tolerance: + 0.0 / – 0.1 mm
Filter Thickness (mounted): 3.5 mm
Filter Thickness Tolerance (mounted): ± 0.1 mm
Clear Aperture: ≥ 22 mm
Scratch-Dig: 60-40
Filter Thickness (unmounted): 2.0 mm
Filter Thickness Tolerance (unmounted): ± 0.1 mm
Orientation: Arrow on ring indicates preferred direction of propagation of light

total selected Clear selection Select all 7 products from all pages.

Available on

FF01-550/49-25

FL-004611 / 0

T_avg > 90% 525.5 – 574.5 nm
Center Wavelength of 550 nm and GMBW of 49 nm
FWHM of 55.3 nm

Available on

FF01-550/200-25

FL-003510 / 0

T_avg > 90% 450 – 650 nm
Center Wavelength of 550 nm and GMBW of 200 nm
FWHM of 210.3 nm

Available on

FF01-554/23-25

FL-004612 / 0

T_avg > 93% 543.0 – 566.0 nm
Center Wavelength of 554.5 nm and GMBW of 23.0 nm
FWHM of 28.1 nm

Available on

BLP01-594R-25

FL-008542 / 0

Filter with 50% edge at 607 nm
411 cm^-1 transition
T_avg > 93% from 610.9 – 900 nm

Available on

FF01-492/SP-25

FL-009652 / 0

Filter with 50% edge at 483 nm
T_avg > 93% 400 – 480 nm

Available on

FF495-Di03-25x36

FL-007145 / 0

Dichroic Beamsplitter with edge at 495 nm
R_avg > 98% 350 – 487.5 nm
T_avg > 93% 502.5 – 950 nm
Flatness / RWE: Standard Epi-fluorescence

Available on

FF605-Di02-25x36

FL-007126 / 0

Dichroic Beamsplitter with edge at 605 nm
R_avg > 98% 350 – 596 nm
T_avg > 93% 612 – 950 nm
Flatness / RWE: Standard Epi-fluorescence

1 of 1

Page Size

Topic	Description
Cleaning Optical Filters	Instructions for cleaning hard coated optical filters
Filter Reliability	Compares the performance and reliability of hard coated filters to traditional soft-coated filters and provides information about the testing standards for Semrock filters
Working with Optical Density	Tables to describe the relationship between OD and transmission with tips for quickly calculating OD