Our website will be undergoing maintenance between Saturday, February 15, 2025 at 11:30 pm until Sunday, February 16, 2025 at 3:30 pm Eastern Standard Time. During this time frame, no orders can be placed, and website access may be limited. We appreciate your patience. Thank you.

544/24 nm BrightLine® single-band bandpass filter

Semrock Part Number: FF01-544/24-25

IDEX Part Number: FL-004684  /

Semrock
Individual fluorescence bandpass filters that have been optimized for use in a variety of fluorescence instruments. All thin-film, hard-coated construction for unsurpassed performance and reliability.
  • Price Not Available.
  • Each
    US Domestic pricing – contact your local distributor for other currency list prices
  • Price Not Available.
  • 375.00 USD Each
    US Domestic pricing – contact your local distributor for other currency list prices
  • 0.00
    0.00
  • Notify me when available
Optical Specifications Value
Transmission Band 1 Tavg > 93% 532 – 556 nm
Blocking Band 1 ODavg > 5 200 – 497.6 nm
Blocking Band 2   ODavg > 8 426 – 450 nm (Design specification - measurements are noise-floor limited).
Blocking Band 3   ODavg > 8 497.6 – 519.5 nm (Design specification - measurements are noise-floor limited)
Blocking Band 4 OD > 3.5 525.8 nm
Blocking Band 5 OD > 3.5 562.7 nm
Blocking Band 6   ODavg > 8 567.4 – 588.6 nm (Design specification - measurements are noise-floor limited)
Blocking Band 7 ODavg > 6 588.6 – 750 nm
Blocking Band 8 ODavg > 5 750 – 925 nm
Blocking Band 9 ODavg > 2 925 – 1100 nm
Center Wavelength 1 544 nm
Guaranteed Minimum Bandwidth 1 24 nm
FWHM Bandwidth 1 (nominal) 29.1 nm
General Filter Specifications Value
Angle of Incidence 0 ± 5 degrees
Cone Half-angle 7 degrees
Optical Damage Rating Testing has proven to show no signs of degradation when exposed to at least 6.0 W of power from an unfiltered xenon arc lamp over a 25 mm diameter (corresponding to 1.2 W/cm2) for over 500 hours.
Physical Filter Specifications   Value
Transverse Dimensions (diameter) 25 mm
Transverse Tolerance + 0.0 / – 0.1 mm
Filter Thickness (mounted) 3.5 mm
Filter Thickness Tolerance (mounted) ± 0.1 mm
Clear Aperture ≥ 22 mm
Scratch-Dig 60-40
Filter Thickness (unmounted) 2.0 mm
Filter Thickness Tolerance (unmounted) ± 0.1 mm
Orientation Arrow on ring indicates preferred direction of propagation of light

FF01-509/22-25

FL-004258 / 0

Out of Stock Backordered In Stock
  • Tavg > 93% 497.6 – 519.5 nm
  • Center Wavelength of 508.6 nm and GMBW of 21.9 nm
  • FWHM of 26.1 nm

FF526-Di01-25x36

FL-007012 / 0

Out of Stock Backordered In Stock
  • Dichroic Beamsplitter with edge at 526 nm
  • Ravg > 98% 350 – 519.5 nm
  • Tavg > 93% 532 – 950 nm
  • Flatness / RWE: Standard Epi-fluorescence

FF01-543/22-25

FL-004717 / 0

Out of Stock Backordered In Stock
  • Tavg > 93% 532 – 554 nm
  • Center Wavelength of 543 nm and GMBW of 22 nm
  • FWHM of 27.1 nm

FF01-545/55-25

FL-004685 / 0

Out of Stock Backordered In Stock
  • Tavg > 90% 522 – 567 nm
  • Center Wavelength of 545 nm and GMBW of 55 nm
  • FWHM of 60.3 nm

FF01-546/6-25

FL-004610 / 0

Out of Stock Backordered In Stock
  • Tavg > 93% 543 – 549 nm
  • Center Wavelength of 546 nm and GMBW of 6 nm
  • FWHM of 12.9 nm

BLP01-568R-25

FL-008484 / 0

Out of Stock Backordered In Stock
  • Filter with 50% edge at 579 nm
  • 429 cm-1 transition
  • Tavg > 93% from 584.1 – 900 nm

BSP01-532R-25

FL-008528 / 0

Out of Stock Backordered In Stock
  • Laser Wavelength = 532 nm
  • Filter 50% edge at 522.7 nm
  • 458 cm-1 transition
  • Tavg > 80% 350 – 400 nm
  • Tavg > 93% 400 – 517.1 nm

FF573-Di01-25x36

FL-007123 / 0

Out of Stock Backordered In Stock
  • Dichroic Beamsplitter with edge at 573 nm
  • Ravg > 98% 350 – 543 nm
  • Tavg > 93% 580 – 636 nm
  •  Flatness / RWE: Standard Epi-fluorescence