525/15 nm BrightLine^® single-band bandpass filter

Semrock Part Number: FF01-525/15-25

IDEX Part Number: FL-004162 /

Optical Specifications	Value
Transmission Band 1	Tavg > 90% 517.5 – 532.5 nm
Blocking Band 1	ODavg > 6 200 – 403 nm
Blocking Band 2	ODavg > 8 403 – 455 nm (Design specification - measurements are noise-floor limited).
Blocking Band 3	ODavg > 5 455 – 502 nm
Blocking Band 4	ODavg > 5 546 – 925 nm
Blocking Band 5	ODavg > 2 925 – 1100 nm
Center Wavelength 1	525 nm
Guaranteed Minimum Bandwidth 1	15 nm
FWHM Bandwidth 1 (nominal)	18.4 nm
General Filter Specifications	Value
Angle of Incidence	0 ± 5 degrees
Cone Half-angle	7 degrees
Optical Damage Rating	Testing has proven to show no signs of degradation when exposed to at least 6.0 W of power from an unfiltered xenon arc lamp over a 25 mm diameter (corresponding to 1.2 W/cm2) for over 500 hours.
Physical Filter Specifications	Value
Transverse Dimensions (diameter)	25 mm
Transverse Tolerance	+ 0.0 / – 0.1 mm
Filter Thickness (mounted)	3.5 mm
Filter Thickness Tolerance (mounted)	± 0.1 mm
Clear Aperture	≥ 22 mm
Scratch-Dig	60-40
Filter Thickness (unmounted)	2.0 mm
Filter Thickness Tolerance (unmounted)	± 0.1 mm
Orientation	Arrow on ring indicates preferred direction of propagation of light

total selected Clear selection Select all 8 products from all pages.

Available on

FF02-435/40-25

FL-003733 / 0

T_avg > 90% 415 – 455 nm
Center Wavelength of 435 nm and GMBW of 40 nm
FWHM of 48.4 nm

Available on

FF510-Di02-25x36

FL-007118 / 0

Dichroic Beamsplitter with edge at 510 nm
R_avg > 98% 327 – 488 nm
T_avg > 93% 515 – 950 nm
Flatness / RWE: Standard Epi-fluorescence

Available on

FF01-524/24-25

FL-004545 / 0

T_avg > 93% 512.5 – 536.5 nm
Center Wavelength of 524.5 nm and GMBW of 24 nm
FWHM of 29.6 nm

Available on

FF01-525/30-25

FL-004450 / 0

T_avg > 90% 510 – 540 nm
Center Wavelength of 525 nm and GMBW of 30 nm
FWHM of 35.8 nm

Available on

FF01-525/39-25

FL-004547 / 0

T_avg > 90% 505.5 – 544.5 nm
Center Wavelength of 525 nm and GMBW of 39 nm
FWHM of 44.9 nm

Available on

BLP01-568R-25

FL-008484 / 0

Filter with 50% edge at 579 nm
429 cm^-1 transition
T_avg > 93% from 584.1 – 900 nm

Available on

FF01-492/SP-25

FL-009652 / 0

Filter with 50% edge at 483 nm
T_avg > 93% 400 – 480 nm

Available on

FF552-Di02-25x36

FL-007121 / 0

Dichroic Beamsplitter with edge at 552 nm
R_avg > 98% 350 – 544 nm
T_avg > 93% 558 – 950 nm
Flatness / RWE: Standard Epi-fluorescence

1 of 1

Page Size

Topic	Description
Cleaning Optical Filters	Instructions for cleaning hard coated optical filters
Filter Reliability	Compares the performance and reliability of hard coated filters to traditional soft-coated filters and provides information about the testing standards for Semrock filters
Working with Optical Density	Tables to describe the relationship between OD and transmission with tips for quickly calculating OD

Optical Specifications: Value
Transmission Band 1: Tavg > 90% 517.5 – 532.5 nm
Blocking Band 1: ODavg > 6 200 – 403 nm
Blocking Band 2: ODavg > 8 403 – 455 nm (Design specification - measurements are noise-floor limited).
Blocking Band 3: ODavg > 5 455 – 502 nm
Blocking Band 4: ODavg > 5 546 – 925 nm
Blocking Band 5: ODavg > 2 925 – 1100 nm
Center Wavelength 1: 525 nm
Guaranteed Minimum Bandwidth 1: 15 nm
FWHM Bandwidth 1 (nominal): 18.4 nm
General Filter Specifications: Value
Angle of Incidence: 0 ± 5 degrees
Cone Half-angle: 7 degrees
Optical Damage Rating: Testing has proven to show no signs of degradation when exposed to at least 6.0 W of power from an unfiltered xenon arc lamp over a 25 mm diameter (corresponding to 1.2 W/cm2) for over 500 hours.
Physical Filter Specifications: Value
Transverse Dimensions (diameter): 25 mm
Transverse Tolerance: + 0.0 / – 0.1 mm
Filter Thickness (mounted): 3.5 mm
Filter Thickness Tolerance (mounted): ± 0.1 mm
Clear Aperture: ≥ 22 mm
Scratch-Dig: 60-40
Filter Thickness (unmounted): 2.0 mm
Filter Thickness Tolerance (unmounted): ± 0.1 mm
Orientation: Arrow on ring indicates preferred direction of propagation of light

total selected Clear selection Select all 8 products from all pages.

Available on

FF02-435/40-25

FL-003733 / 0

T_avg > 90% 415 – 455 nm
Center Wavelength of 435 nm and GMBW of 40 nm
FWHM of 48.4 nm

Available on

FF510-Di02-25x36

FL-007118 / 0

Dichroic Beamsplitter with edge at 510 nm
R_avg > 98% 327 – 488 nm
T_avg > 93% 515 – 950 nm
Flatness / RWE: Standard Epi-fluorescence

Available on

FF01-524/24-25

FL-004545 / 0

T_avg > 93% 512.5 – 536.5 nm
Center Wavelength of 524.5 nm and GMBW of 24 nm
FWHM of 29.6 nm

Available on

FF01-525/30-25

FL-004450 / 0

T_avg > 90% 510 – 540 nm
Center Wavelength of 525 nm and GMBW of 30 nm
FWHM of 35.8 nm

Available on

FF01-525/39-25

FL-004547 / 0

T_avg > 90% 505.5 – 544.5 nm
Center Wavelength of 525 nm and GMBW of 39 nm
FWHM of 44.9 nm

Available on

BLP01-568R-25

FL-008484 / 0

Filter with 50% edge at 579 nm
429 cm^-1 transition
T_avg > 93% from 584.1 – 900 nm

Available on

FF01-492/SP-25

FL-009652 / 0

Filter with 50% edge at 483 nm
T_avg > 93% 400 – 480 nm

Available on

FF552-Di02-25x36

FL-007121 / 0

Dichroic Beamsplitter with edge at 552 nm
R_avg > 98% 350 – 544 nm
T_avg > 93% 558 – 950 nm
Flatness / RWE: Standard Epi-fluorescence

1 of 1

Page Size

Topic	Description
Cleaning Optical Filters	Instructions for cleaning hard coated optical filters
Filter Reliability	Compares the performance and reliability of hard coated filters to traditional soft-coated filters and provides information about the testing standards for Semrock filters
Working with Optical Density	Tables to describe the relationship between OD and transmission with tips for quickly calculating OD

Recently Viewed

View All