Our website e-store and registration process will be offline for maintenance from 6:00pm Eastern Time on Saturday, November 9 until 9:00am Eastern Time, November 10.
During this time frame, no orders can be placed and website registration is on pause. We appreciate your patience. Thank you.

509/22 nm BrightLine® single-band bandpass filter

Semrock Part Number: FF01-509/22-25

IDEX Part Number: FL-004258  /

Semrock
Individual fluorescence bandpass filters that have been optimized for use in a variety of fluorescence instruments. All thin-film, hard-coated construction for unsurpassed performance and reliability.
  • Price Not Available.
  • Each
    US Domestic pricing – contact your local distributor for other currency list prices
  • Price Not Available.
  • 375.00 USD Each
    US Domestic pricing – contact your local distributor for other currency list prices
  • 0.00
    0.00
  • Notify me when available
Optical Specifications Value
Transmission Band 1 Tavg > 93% 497.6 – 519.5 nm
Blocking Band 1   ODavg > 5 200 – 300 nm (Design specification - measurements are noise-floor limited).
Blocking Band 2 ODavg > 6 300 – 486 nm
Blocking Band 3   ODavg > 8 464 – 486 nm (Design specification - measurements are noise-floor limited)
Blocking Band 4 OD > 3.5 491.8 nm
Blocking Band 5 OD > 3.5 525.8 nm
Blocking Band 6   ODavg > 8 532 – 554 nm (Design specification - measurements are noise-floor limited)
Blocking Band 7   ODavg > 8 603 – 800 nm (Design specification - measurements are noise-floor limited)
Blocking Band 8 ODavg > 6 554 – 850 nm
Blocking Band 9 ODavg > 4 850 – 925 nm
Blocking Band 10 ODavg > 2 925 – 1100 nm
Center Wavelength 1 508.6 nm
Guaranteed Minimum Bandwidth 1 21.9 nm
FWHM Bandwidth 1 (nominal) 26.1 nm
General Filter Specifications Value
Angle of Incidence 0 ± 5 degrees
Cone Half-angle 7 degrees
Optical Damage Rating Testing has proven to show no signs of degradation when exposed to at least 6.0 W of power from an unfiltered xenon arc lamp over a 25 mm diameter (corresponding to 1.2 W/cm2) for over 500 hours.
Physical Filter Specifications   Value
Transverse Dimensions (diameter) 25 mm
Transverse Tolerance + 0.0 / – 0.1 mm
Filter Thickness (mounted) 5.0 mm
Filter Thickness Tolerance (mounted) ± 0.1 mm
Clear Aperture ≥ 21 mm
Scratch-Dig 60-40
Filter Thickness (unmounted) 2.0 mm
Filter Thickness Tolerance (unmounted) ± 0.1 mm
Orientation Arrow on ring indicates preferred direction of propagation of light

FF01-544/24-25

FL-004684 / 0

Out of Stock Backordered In Stock
  • Tavg > 93% 532 – 556 nm
  • Center Wavelength of 544 nm and GMBW of 24 nm
  • FWHM of 29.1 nm

FF526-Di01-25x36

FL-007012 / 0

Out of Stock Backordered In Stock
  • Dichroic Beamsplitter with edge at 526 nm
  • Ravg > 98% 350 – 519.5 nm
  • Tavg > 93% 532 – 950 nm
  • Flatness / RWE: Standard Epi-fluorescence

FF01-504/12-25

FL-004481 / 0

Out of Stock Backordered In Stock
  • Tavg > 93% 498 – 510 nm
  • Center Wavelength of 504 nm and GMBW of 12 nm
  • FWHM of 17 nm

FF02-510/10-25

FL-003881 / 0

Out of Stock Backordered In Stock
  • Tavg > 93% 505 – 515 nm
  • Center Wavelength of 510 nm and GMBW of 10 nm
  • FWHM of 15 nm

FF03-510/20-25

FL-004246 / 0

Out of Stock Backordered In Stock
  • Tavg > 90% 500 – 520 nm
  • Center Wavelength of 510 nm and GMBW of 20 nm
  • FWHM of 25 nm

BLP01-532R-25

FL-008541 / 0

Out of Stock Backordered In Stock
  • Filter with 50% edge at 542 nm
  • 458 cm-1 transition
  • Tavg > 93% from 546.9 – 900 nm

FF01-492/SP-25

FL-009652 / 0

Out of Stock Backordered In Stock
  • Filter with 50% edge at 483 nm
  • Tavg > 93% 400 – 480 nm

FF484-FDi01-25x36

FL-007022 / 0

Out of Stock Backordered In Stock
  • Imaging Dichroic Beamsplitter with edge at 484 nm
  • Ravg > 95% 350 – 475 nm
  • Tavg > 93% 492.3 – 950 nm
  • Common Fluorophore Pair to Split: DAPI/FITC
  • Flatness / RWE: Image-splitting

Custom sizing delivery confirmed ARO (sizing fee applies).