475/543/702 nm BrightLine® triple-band bandpass filter

Semrock Part Number: FF01-475/543/702-25

IDEX Part Number: FL-004065  /

Semrock
Individual multiband fluorescence bandpass filters that utilize Semrock's patented single-substrate construction. These filters have extremely high transmission, steep and well-defined edges, and outstanding blocking between the passbands. All thin-film, hard-coated construction for unsurpassed performance and reliability.
  • Price Not Available.
  • Each
  • Price Not Available.
  • 530.00 USD Each
  • 0.00
    0.00
  • Notify me when available
Optical Specifications Value
Transmission Band 1 Tavg > 93% 464 – 486 nm
Transmission Band 2 Tavg > 93% 532 – 554 nm
Transmission Band 3 Tavg > 93% 603 – 800 nm
Blocking Band 1 ODavg > 4 275 – 426 nm
Blocking Band 2   ODavg > 8 426 – 450 nm (Design specification - measurements are noise-floor limited).
Blocking Band 3 OD > 3.5 458.5 nm
Blocking Band 4 OD > 3.5 491.8 nm
Blocking Band 5   ODavg > 8 497.6 – 519.5 nm (Design specification - measurements are noise-floor limited)
Blocking Band 6 OD > 3.5 525.8 nm
Blocking Band 7 OD > 3.5 560.7 nm
Blocking Band 8   ODavg > 8 567.4 – 588.6 nm (Design specification - measurements are noise-floor limited)
Blocking Band 9 OD > 3.5 595.8 nm
Blocking Band 10 ODavg > 5 810.8 – 900 nm
Center Wavelength 1 475 nm
Center Wavelength 2 543 nm
Center Wavelength 3 701.5 nm
Guaranteed Minimum Bandwidth 1 22 nm
Guaranteed Minimum Bandwidth 2 22 nm
Guaranteed Minimum Bandwidth 3 197 nm
FWHM Bandwidth 1 (nominal) 27.2nm
FWHM Bandwidth 2 (nominal) 27.2 nm
FWHM Bandwidth 3 (nominal) 201.3 nm
General Filter Specifications Value
Angle of Incidence 0 ± 5 degrees
Cone Half-angle 7 degrees
Optical Damage Rating Testing has proven to show no signs of degradation when exposed to at least 6.0 W of power from an unfiltered xenon arc lamp over a 25 mm diameter (corresponding to 1.2 W/cm2) for over 500 hours.
Physical Filter Specifications   Value
Transverse Dimensions (Diameter) 25 mm
Transverse Tolerance (mounted) + 0.0 / – 0.1 mm
Filter Thickness (Mounted) 3.5 mm
Filter Thickness Tolerance (Mounted) ± 0.1 mm
Clear Aperture ≥ 22 mm
Scratch-Dig 60-40
Substrate Thickness (unmounted) 2.0 mm
Substrate Thickness Tolerance (unmounted) ± 0.1 mm
Orientation Arrow on ring indicates preferred direction of propagation of light

FF02-438/24-25

FL-004649 / 0

Out of Stock Backordered In Stock
  • Tavg > 93% 426 – 450 nm
  • Center Wavelength of 438 nm and GMBW of 24 nm
  • FWHM of 29.5 nm

FF01-509/22-25

FL-004258 / 0

Out of Stock Backordered In Stock
  • Tavg > 93% 497.6 – 519.5 nm
  • Center Wavelength of 508.6 nm and GMBW of 21.9 nm
  • FWHM of 26.1 nm

FF01-578/21-25

FL-004616 / 0

Out of Stock Backordered In Stock
  • Tavg > 93% 567.4 – 588.6 nm
  • Center Wavelength of 578 nm and GMBW of 21.2 nm
  • FWHM of 26.1 nm

FF459/526/596-Di01-25x36

FL-007091 / 0

Out of Stock Backordered In Stock
  • Dichroic Beamsplitter with edges at 459 nm, 526 nm & 596 nm
  • Ravg > 95% 350 – 450 nm, Ravg > 95% 497.6 – 519.5 nm & Ravg > 95% 567.4 – 588.6 nm
  • Tavg > 93% 464 – 486 nm, Tavg > 93% 532 – 554 nm & Tavg > 93% 603 – 800 nm

FF01-464/547-25

FL-003691 / 0

Out of Stock Backordered In Stock
• Tavg > 90% 452.5 – 475.5 nm & Tavg > 90% 531.5 – 562.5 nm
• Center Wavelengths of 464 nm & 547 nm and GMBWs of 23 nm & 31 nm

1 of 1

TopicDescription
Cleaning Optical FiltersInstructions for cleaning hard coated optical filters
Filter ReliabilityCompares the performance and reliability of hard coated filters to traditional soft-coated filters and provides information about the testing standards for Semrock filters
Working with Optical DensityTables to describe the relationship between OD and transmission with tips for quickly calculating OD
Multiband Filter Set TerminologyCompares benefits and drawbacks of full multiband, pinkel and sedat filter sets

Specifications

TopicDescription
Cleaning Optical FiltersInstructions for cleaning hard coated optical filters
Filter ReliabilityCompares the performance and reliability of hard coated filters to traditional soft-coated filters and provides information about the testing standards for Semrock filters
Working with Optical DensityTables to describe the relationship between OD and transmission with tips for quickly calculating OD
Multiband Filter Set TerminologyCompares benefits and drawbacks of full multiband, pinkel and sedat filter sets