Due to recent tariffs, a surcharge will be applied to all products in our webstore shipping on or after 4/21/2025. Read a letter from IDEX Health & Science Leadership.

446/510/581/703 nm BrightLine^® quad-band bandpass filter

Semrock Part Number: FF01-446/510/581/703-25

IDEX Part Number: FL-004412 /

Optical Specifications	Value
Transmission Band 1	Tavg > 93% 429.5 – 462.0 nm
Transmission Band 2	Tavg > 93% 502.5 – 518.5 nm
Transmission Band 3	Tavg > 93% 550 – 613 nm
Transmission Band 4	Tavg > 93% 663 – 743 nm
Blocking Band 1	ODavg > 4 200 – 370 nm
Blocking Band 2	ODavg > 8 370 – 410 nm (Design specification - measurements are noise-floor limited).
Blocking Band 3	OD > 3.5 419.8 nm
Blocking Band 4	OD > 3.5 467.5 nm
Blocking Band 5	ODavg > 8 473 – 491 nm (Design specification - measurements are noise-floor limited)
Blocking Band 6	OD > 3.5 496.8 nm
Blocking Band 7	OD > 3.5 524.5 nm
Blocking Band 8	ODavg > 8 530.5 – 533.5 nm (Design specification - measurements are noise-floor limited)
Blocking Band 9	OD > 3.5 541.8 nm
Blocking Band 10	OD > 3.5 622.9 nm
Blocking Band 11	ODavg > 8 632.8 – 647.1 nm (Design specification - measurements are noise-floor limited).
Blocking Band 12	OD > 3.5 655.1 nm
Blocking Band 13	ODavg > 5 760.9 – 900 nm
Blocking Band 14	OD > 5 1064 nm
Center Wavelength 1	445.8 nm
Center Wavelength 2	510.5 nm
Center Wavelength 3	581.5 nm
Center Wavelength 4	703 nm
Guaranteed Minimum Bandwidth 1	32.5 nm
Guaranteed Minimum Bandwidth 2	16 nm
Guaranteed Minimum Bandwidth 3	63 nm
Guaranteed Minimum Bandwidth 4	80 nm
FWHM Bandwidth 1 (nominal)	37.4 nm
FWHM Bandwidth 2 (nominal)	20.5 nm
FWHM Bandwidth 3 (nominal)	69.3 nm
FWHM Bandwidth 4 (nominal)	87.5 nm
General Filter Specifications	Value
Angle of Incidence	0 ± 5 degrees
Cone Half-angle	7 degrees
Optical Damage Rating	Testing has proven to show no signs of degradation when exposed to at least 6.0 W of power from an unfiltered xenon arc lamp over a 25 mm diameter (corresponding to 1.2 W/cm2) for over 500 hours.
Physical Filter Specifications	Value
Transverse Dimensions (diameter)	25 mm
Transverse Tolerance	+ 0.0 / – 0.1 mm
Filter Thickness (mounted)	3.5 mm
Filter Thickness Tolerance (mounted)	± 0.1 mm
Clear Aperture	≥ 22 mm
Scratch-Dig	60-40
Filter Thickness (unmounted)	2.0 mm
Filter Thickness Tolerance (unmounted)	± 0.1 mm
Orientation	Arrow on ring indicates preferred direction of propagation of light

total selected Clear selection Select all 6 products from all pages.

Available on

FF01-390/40-25

FL-004666 / 0

T_avg > 93% 370 – 410 nm
Center Wavelength of 390 nm and GMBW of 40 nm
FWHM of 44.6 nm

Available on

FF02-482/18-25

FL-004712 / 0

T_avg > 93% 473 – 491 nm
Center Wavelength of 482 nm and GMBW of 18 nm
FWHM of 24.4 nm

Available on

FF01-532/3-25

FL-004387 / 0

T_avg > 93% 530.5 – 533.5 nm
Center Wavelength of 532 nm and GMBW of 3 nm
FWHM of 9.2 nm

Available on

FF01-640/14-25

FL-004697 / 0

T_avg > 93% 633 – 647 nm
Center Wavelength of 640 nm and GMBW of 14 nm
FWHM of 20.2 nm

Available on

FF01-390/482/532/640-25

FL-004407 / 0

T_avg > 90% 370 – 410 nm, T_avg > 90% 473 – 491 nm, T_avg > 90% 530.5 – 533.5 nm & T_avg > 90% 632.8 – 647.1 nm
Center Wavelengths of 390 nm, 482 nm, 532 nm & 640 nm and GMBWs of 40 nm, 18 nm, 3 nm & 14 nm

Available on

Di01-R405/488/532/635-25x36

FL-006636 / 0

Laser Dichroic Beamsplitter with edges at 422.3 nm, 497.8 nm, 541.6 nm & 655.9 nm
R_abs > 94% 370 – 410 nm, R_abs > 94% 473 – 491 nm, R_avg > 94% 530.5 – 533.5 nm & R_avg > 94% 632.8 – 647.1 nm
T_avg > 93% 429.5 – 462.0 nm, T_avg > 93% 502.5 – 518.5 nm, T_avg > 93% 550 – 613 nm & T_avg > 93% 663 – 800 nm

1 of 1

Page Size

Topic	Description
Cleaning Optical Filters	Instructions for cleaning hard coated optical filters
Filter Reliability	Compares the performance and reliability of hard coated filters to traditional soft-coated filters and provides information about the testing standards for Semrock filters
Working with Optical Density	Tables to describe the relationship between OD and transmission with tips for quickly calculating OD
Multiband Filter Set Terminology	Compares benefits and drawbacks of full multiband, pinkel and sedat filter sets

Optical Specifications: Value
Transmission Band 1: Tavg > 93% 429.5 – 462.0 nm
Transmission Band 2: Tavg > 93% 502.5 – 518.5 nm
Transmission Band 3: Tavg > 93% 550 – 613 nm
Transmission Band 4: Tavg > 93% 663 – 743 nm
Blocking Band 1: ODavg > 4 200 – 370 nm
Blocking Band 2: ODavg > 8 370 – 410 nm (Design specification - measurements are noise-floor limited).
Blocking Band 3: OD > 3.5 419.8 nm
Blocking Band 4: OD > 3.5 467.5 nm
Blocking Band 5: ODavg > 8 473 – 491 nm (Design specification - measurements are noise-floor limited)
Blocking Band 6: OD > 3.5 496.8 nm
Blocking Band 7: OD > 3.5 524.5 nm
Blocking Band 8: ODavg > 8 530.5 – 533.5 nm (Design specification - measurements are noise-floor limited)
Blocking Band 9: OD > 3.5 541.8 nm
Blocking Band 10: OD > 3.5 622.9 nm
Blocking Band 11: ODavg > 8 632.8 – 647.1 nm (Design specification - measurements are noise-floor limited).
Blocking Band 12: OD > 3.5 655.1 nm
Blocking Band 13: ODavg > 5 760.9 – 900 nm
Blocking Band 14: OD > 5 1064 nm
Center Wavelength 1: 445.8 nm
Center Wavelength 2: 510.5 nm
Center Wavelength 3: 581.5 nm
Center Wavelength 4: 703 nm
Guaranteed Minimum Bandwidth 1: 32.5 nm
Guaranteed Minimum Bandwidth 2: 16 nm
Guaranteed Minimum Bandwidth 3: 63 nm
Guaranteed Minimum Bandwidth 4: 80 nm
FWHM Bandwidth 1 (nominal): 37.4 nm
FWHM Bandwidth 2 (nominal): 20.5 nm
FWHM Bandwidth 3 (nominal): 69.3 nm
FWHM Bandwidth 4 (nominal): 87.5 nm
General Filter Specifications: Value
Angle of Incidence: 0 ± 5 degrees
Cone Half-angle: 7 degrees
Optical Damage Rating: Testing has proven to show no signs of degradation when exposed to at least 6.0 W of power from an unfiltered xenon arc lamp over a 25 mm diameter (corresponding to 1.2 W/cm2) for over 500 hours.
Physical Filter Specifications: Value
Transverse Dimensions (diameter): 25 mm
Transverse Tolerance: + 0.0 / – 0.1 mm
Filter Thickness (mounted): 3.5 mm
Filter Thickness Tolerance (mounted): ± 0.1 mm
Clear Aperture: ≥ 22 mm
Scratch-Dig: 60-40
Filter Thickness (unmounted): 2.0 mm
Filter Thickness Tolerance (unmounted): ± 0.1 mm
Orientation: Arrow on ring indicates preferred direction of propagation of light

total selected Clear selection Select all 6 products from all pages.

Available on

FF01-390/40-25

FL-004666 / 0

T_avg > 93% 370 – 410 nm
Center Wavelength of 390 nm and GMBW of 40 nm
FWHM of 44.6 nm

Available on

FF02-482/18-25

FL-004712 / 0

T_avg > 93% 473 – 491 nm
Center Wavelength of 482 nm and GMBW of 18 nm
FWHM of 24.4 nm

Available on

FF01-532/3-25

FL-004387 / 0

T_avg > 93% 530.5 – 533.5 nm
Center Wavelength of 532 nm and GMBW of 3 nm
FWHM of 9.2 nm

Available on

FF01-640/14-25

FL-004697 / 0

T_avg > 93% 633 – 647 nm
Center Wavelength of 640 nm and GMBW of 14 nm
FWHM of 20.2 nm

Available on

FF01-390/482/532/640-25

FL-004407 / 0

T_avg > 90% 370 – 410 nm, T_avg > 90% 473 – 491 nm, T_avg > 90% 530.5 – 533.5 nm & T_avg > 90% 632.8 – 647.1 nm
Center Wavelengths of 390 nm, 482 nm, 532 nm & 640 nm and GMBWs of 40 nm, 18 nm, 3 nm & 14 nm

Available on

Di01-R405/488/532/635-25x36

FL-006636 / 0

Laser Dichroic Beamsplitter with edges at 422.3 nm, 497.8 nm, 541.6 nm & 655.9 nm
R_abs > 94% 370 – 410 nm, R_abs > 94% 473 – 491 nm, R_avg > 94% 530.5 – 533.5 nm & R_avg > 94% 632.8 – 647.1 nm
T_avg > 93% 429.5 – 462.0 nm, T_avg > 93% 502.5 – 518.5 nm, T_avg > 93% 550 – 613 nm & T_avg > 93% 663 – 800 nm

1 of 1

Page Size

Topic	Description
Cleaning Optical Filters	Instructions for cleaning hard coated optical filters
Filter Reliability	Compares the performance and reliability of hard coated filters to traditional soft-coated filters and provides information about the testing standards for Semrock filters
Working with Optical Density	Tables to describe the relationship between OD and transmission with tips for quickly calculating OD
Multiband Filter Set Terminology	Compares benefits and drawbacks of full multiband, pinkel and sedat filter sets