392/23 nm BrightLine® single-band bandpass filter

Semrock Part Number: FF01-392/23-25

IDEX Part Number: FL-004468  /

Semrock
Individual fluorescence bandpass filters that have been optimized for use in a variety of fluorescence instruments. All thin-film, hard-coated construction for unsurpassed performance and reliability.
  • Price Not Available.
  • Each
    US Domestic pricing – contact your local distributor for other currency list prices
  • Price Not Available.
  • 375.00 USD Each
    US Domestic pricing – contact your local distributor for other currency list prices
  • 0.00
    0.00
  • Notify me when available
Optical Specifications Value
Transmission Band 1 Tavg > 93% 381.0 – 404.0 nm
Blocking Band 1   ODavg > 5 200 – 300 nm (Design specification - measurements are noise-floor limited).
Blocking Band 2 ODavg > 6 300 – 375 nm
Blocking Band 3 OD > 3.5 409 nm
Blocking Band 4   ODavg > 8 414 – 450 nm (Design specification - measurements are noise-floor limited)
Blocking Band 5   ODavg > 8 499.5 – 530 nm (Design specification - measurements are noise-floor limited)
Blocking Band 6   ODavg > 8 580 – 611 nm (Design specification - measurements are noise-floor limited)
Blocking Band 7   ODavg > 8 659.5 – 800 nm (Design specification - measurements are noise-floor limited)
Blocking Band 8 ODavg > 6 450 – 850 nm
Blocking Band 9 ODavg > 4 850 – 925 nm
Blocking Band 10 ODavg > 2 925 – 1100 nm
Center Wavelength 1 392.5 nm
Guaranteed Minimum Bandwidth 1 23 nm
FWHM Bandwidth 1 (nominal) 26.7 nm
General Filter Specifications Value
Angle of Incidence 0 ± 5 degrees
Cone Half-angle 7 degrees
Optical Damage Rating Testing has proven to show no signs of degradation when exposed to at least 6.0 W of power from an unfiltered xenon arc lamp over a 25 mm diameter (corresponding to 1.2 W/cm2) for over 500 hours.
Physical Filter Specifications   Value
Transverse Dimensions (diameter) 25 mm
Transverse Tolerance + 0.0 / – 0.1 mm
Filter Thickness (mounted) 5.0 mm
Filter Thickness Tolerance (mounted) ± 0.1 mm
Clear Aperture ≥ 21 mm
Scratch-Dig 60-40
Filter Thickness (unmounted) 2.0 mm
Filter Thickness Tolerance (unmounted) ± 0.1 mm
Orientation Arrow on ring indicates preferred direction of propagation of light

FF02-447/60-25

FL-004651 / 0

Out of Stock Backordered In Stock
  • Tavg > 93% 417 – 477 nm
  • Center Wavelength of 447 nm and GMBW of 60 nm
  • FWHM of 65.3 nm

FF409-Di03-25x36

FL-007109 / 0

Out of Stock Backordered In Stock
  • Dichroic Beamsplitter with edge at 409 nm
  • Ravg > 98% 327 – 404 nm
  • Tavg > 93% 415 - 950 nm
  • Flatness / RWE: Standard Epi-fluorescence

Custom sizing delivery confirmed ARO (sizing fee applies).

FF01-390/40-25

FL-004666 / 0

Out of Stock Backordered In Stock
  • Tavg > 93% 370 – 410 nm
  • Center Wavelength of 390 nm and GMBW of 40 nm
  • FWHM of 44.6 nm

FF01-395/11-25

FL-004372 / 0

Out of Stock Backordered In Stock
  • Tavg > 85% 389.5 – 400.5 nm
  • Center Wavelength of 395 nm and GMBW of 11 nm
  • FWHM of 16.1 nm

FF01-400/40-25

FL-004122 / 0

Out of Stock Backordered In Stock
  • Tavg > 90% 380 – 420 nm
  • Center Wavelength of 400 nm and GMBW of 40 nm
  • FWHM of 47.5 nm

BLP01-405R-25

FL-008529 / 0

Out of Stock Backordered In Stock
  • Filter with 50% edge at 418 nm
  • 595 cm-1 transition
  • Tavg > 93% from 421.5 – 900 nm

FF01-311/SP-25

FL-009639 / 0

Out of Stock Backordered In Stock
  • Filter with 50% edge at 304 nm
  • Tavg > 70% 250 – 300 nm

FF365-Di01-25x36

FL-006989 / 0

Out of Stock Backordered In Stock
  • Dichroic Beamsplitter with edge at 365 nm
  • Ravg > 94% 230 – 360 nm
  • Tavg > 90% 370 – 508 nm
  • Flatness / RWE: Standard Epi-fluorescence

Custom sizing delivery confirmed ARO (sizing fee applies)