391/477/549/639/741 nm BrightLine^® penta-band bandpass filter

Semrock Part Number: FF01-391/477/549/639/741-25

IDEX Part Number: FL-410455 /

Optical Specifications	Value
Transmission Band 1	Tavg > 85% 369 – 413 nm
Transmission Band 2	Tavg > 90% 471 – 483 nm
Transmission Band 3	Tavg > 90% 541 – 557nm
Transmission Band 4	Tavg > 90% 630 – 647 nm
Transmission Band 5	Tavg > 90% 725 – 757 nm
Blocking Band 1	ODavg > 6 200 – 275 nm (Design specification - measurements are noise-floor limited).
Blocking Band 2	ODavg > 6 275 – 358 nm
Blocking Band 3	OD > 3.5 420 nm
Blocking Band 4	ODavg > 6 426 – 456 nm
Blocking Band 5	OD > 3.5 463 nm
Blocking Band 6	OD > 3.5 491 nm
Blocking Band 7	ODavg > 6 498 – 524 nm
Blocking Band 8	OD > 3.5 532 nm
Blocking Band 9	OD > 3.5 566 nm
Blocking Band 10	ODavg > 6 574 – 611 nm
Blocking Band 11	OD > 3.5 620 nm
Blocking Band 12	OD > 3.5 657.5 nm
Blocking Band 13	ODavg > 6 667 – 701 nm
Blocking Band 14	OD > 3.5 712 nm
Blocking Band 15	OD > 3.5 771 nm
Blocking Band 16	ODavg > 6 784 – 850 nm
Blocking Band 17	ODavg > 4 850 – 925 nm
Blocking Band 18	ODavg > 2 925 – 1100 nm
Center Wavelength 1	391 nm
Center Wavelength 2	477 nm
Center Wavelength 3	549 nm
Center Wavelength 4	638.5 nm
Center Wavelength 5	741 nm
Guaranteed Minimum Bandwidth 1	44 nm
Guaranteed Minimum Bandwidth 2	12 nm
Guaranteed Minimum Bandwidth 3	16 nm
Guaranteed Minimum Bandwidth 4	17 nm
Guaranteed Minimum Bandwidth 5	32 nm
FWHM Bandwidth 1 (nominal)	54.4 nm
FWHM Bandwidth 2 (nominal)	20.4 nm
FWHM Bandwidth 3 (nominal)	25.7 nm
FWHM Bandwidth 4 (nominal)	27.6 nm
FWHM Bandwidth 5 (nominal)	45.1 nm
General Filter Specifications	Value
Angle of Incidence	0 ± 5 degrees
Cone Half-angle	7 degrees
Optical Damage Rating	Testing has proven to show no signs of degradation when exposed to at least 6.0 W of power from an unfiltered xenon arc lamp over a 25 mm diameter (corresponding to 1.2 W/cm2) for over 500 hours.
Physical Filter Specifications	Value
Transverse Dimensions (diameter)	25 mm
Transverse Tolerance	+ 0.0 / – 0.1 mm
Filter Thickness (mounted)	5.0 mm
Filter Thickness Tolerance (mounted)	± 0.1 mm
Clear Aperture	≥ 21 mm
Scratch-Dig	60-40
Filter Thickness (unmounted)	3.5 mm
Filter Thickness Tolerance (unmounted)	± 0.1 mm
Orientation	Arrow on ring indicates preferred direction of propagation of light

total selected Clear selection Select all 2 products from all pages.

Available on

FF01-441/511/593/684/817-25

FL-410484 / 0

T_avg > 90% 426 – 456 nm, T_avg > 90% 498 – 524 nm, T_avg > 90% 574 – 611 nm, T_avg > 90% 667 – 701 nm & T_avg > 90% 784 – 850 nm
Center Wavelengths of 441nm, 511 nm, 592.5 nm, 684 nm & 817 nm and GMBWs of 30 nm, 26 nm, 37 nm, 34 nm & 66 nm
Optimized for Lumencor CELESTA light engine® utilizing 408 nm, 473 nm, 545 nm, 635 nm & 750 nm wavelengths

Available on

FF421/491/567/659/776-Di01-25x36

FL-410491 / 0

Dichroic Beamsplitter with edges at 421 nm, 491 nm, 567 nm, 659 nm & 776 nm
R_avg > 95% 369 – 413 nm, R_avg > 95% 471 – 483 nm, R_avg > 95% 541 – 557 nm, R_avg > 95% 630 – 647 nm & R_avg > 95% 725 – 757 nm
T_avg > 93% 426 – 456 nm, T_avg > 93% 498 – 524 nm, T_avg > 93% 574 – 611 nm, Tavg > 93% 667 – 701 nm, T_avg > 93% 784 – 850 nm
Optimized for Lumencor CELESTA light engine® utilizing 408 nm, 473 nm, 545 nm, 635 nm & 750 nm wavelengths

1 of 1

Page Size

Topic	Description
Cleaning Optical Filters	Instructions for cleaning hard coated optical filters
Filter Reliability	Compares the performance and reliability of hard coated filters to traditional soft-coated filters and provides information about the testing standards for Semrock filters
Working with Optical Density	Tables to describe the relationship between OD and transmission with tips for quickly calculating OD
Multiband Filter Set Terminology	Compares benefits and drawbacks of full multiband, pinkel and sedat filter sets

Optical Specifications: Value
Transmission Band 1: Tavg > 85% 369 – 413 nm
Transmission Band 2: Tavg > 90% 471 – 483 nm
Transmission Band 3: Tavg > 90% 541 – 557nm
Transmission Band 4: Tavg > 90% 630 – 647 nm
Transmission Band 5: Tavg > 90% 725 – 757 nm
Blocking Band 1: ODavg > 6 200 – 275 nm (Design specification - measurements are noise-floor limited).
Blocking Band 2: ODavg > 6 275 – 358 nm
Blocking Band 3: OD > 3.5 420 nm
Blocking Band 4: ODavg > 6 426 – 456 nm
Blocking Band 5: OD > 3.5 463 nm
Blocking Band 6: OD > 3.5 491 nm
Blocking Band 7: ODavg > 6 498 – 524 nm
Blocking Band 8: OD > 3.5 532 nm
Blocking Band 9: OD > 3.5 566 nm
Blocking Band 10: ODavg > 6 574 – 611 nm
Blocking Band 11: OD > 3.5 620 nm
Blocking Band 12: OD > 3.5 657.5 nm
Blocking Band 13: ODavg > 6 667 – 701 nm
Blocking Band 14: OD > 3.5 712 nm
Blocking Band 15: OD > 3.5 771 nm
Blocking Band 16: ODavg > 6 784 – 850 nm
Blocking Band 17: ODavg > 4 850 – 925 nm
Blocking Band 18: ODavg > 2 925 – 1100 nm
Center Wavelength 1: 391 nm
Center Wavelength 2: 477 nm
Center Wavelength 3: 549 nm
Center Wavelength 4: 638.5 nm
Center Wavelength 5: 741 nm
Guaranteed Minimum Bandwidth 1: 44 nm
Guaranteed Minimum Bandwidth 2: 12 nm
Guaranteed Minimum Bandwidth 3: 16 nm
Guaranteed Minimum Bandwidth 4: 17 nm
Guaranteed Minimum Bandwidth 5: 32 nm
FWHM Bandwidth 1 (nominal): 54.4 nm
FWHM Bandwidth 2 (nominal): 20.4 nm
FWHM Bandwidth 3 (nominal): 25.7 nm
FWHM Bandwidth 4 (nominal): 27.6 nm
FWHM Bandwidth 5 (nominal): 45.1 nm
General Filter Specifications: Value
Angle of Incidence: 0 ± 5 degrees
Cone Half-angle: 7 degrees
Optical Damage Rating: Testing has proven to show no signs of degradation when exposed to at least 6.0 W of power from an unfiltered xenon arc lamp over a 25 mm diameter (corresponding to 1.2 W/cm2) for over 500 hours.
Physical Filter Specifications: Value
Transverse Dimensions (diameter): 25 mm
Transverse Tolerance: + 0.0 / – 0.1 mm
Filter Thickness (mounted): 5.0 mm
Filter Thickness Tolerance (mounted): ± 0.1 mm
Clear Aperture: ≥ 21 mm
Scratch-Dig: 60-40
Filter Thickness (unmounted): 3.5 mm
Filter Thickness Tolerance (unmounted): ± 0.1 mm
Orientation: Arrow on ring indicates preferred direction of propagation of light

total selected Clear selection Select all 2 products from all pages.

Available on

FF01-441/511/593/684/817-25

FL-410484 / 0

T_avg > 90% 426 – 456 nm, T_avg > 90% 498 – 524 nm, T_avg > 90% 574 – 611 nm, T_avg > 90% 667 – 701 nm & T_avg > 90% 784 – 850 nm
Center Wavelengths of 441nm, 511 nm, 592.5 nm, 684 nm & 817 nm and GMBWs of 30 nm, 26 nm, 37 nm, 34 nm & 66 nm
Optimized for Lumencor CELESTA light engine® utilizing 408 nm, 473 nm, 545 nm, 635 nm & 750 nm wavelengths

Available on

FF421/491/567/659/776-Di01-25x36

FL-410491 / 0

Dichroic Beamsplitter with edges at 421 nm, 491 nm, 567 nm, 659 nm & 776 nm
R_avg > 95% 369 – 413 nm, R_avg > 95% 471 – 483 nm, R_avg > 95% 541 – 557 nm, R_avg > 95% 630 – 647 nm & R_avg > 95% 725 – 757 nm
T_avg > 93% 426 – 456 nm, T_avg > 93% 498 – 524 nm, T_avg > 93% 574 – 611 nm, Tavg > 93% 667 – 701 nm, T_avg > 93% 784 – 850 nm
Optimized for Lumencor CELESTA light engine® utilizing 408 nm, 473 nm, 545 nm, 635 nm & 750 nm wavelengths

1 of 1

Page Size

Topic	Description
Cleaning Optical Filters	Instructions for cleaning hard coated optical filters
Filter Reliability	Compares the performance and reliability of hard coated filters to traditional soft-coated filters and provides information about the testing standards for Semrock filters
Working with Optical Density	Tables to describe the relationship between OD and transmission with tips for quickly calculating OD
Multiband Filter Set Terminology	Compares benefits and drawbacks of full multiband, pinkel and sedat filter sets

Recently Viewed

View All