405 nm laser BrightLine® single-edge laser dichroic beamsplitter

Semrock Part Number: Di02-R405-25x36

IDEX Part Number: FL-007134  /

Semrock

The perfect dichroic beamsplitters for the most popular lasers used in fluorescence imaging, including newer all-solid-state lasers. All beamsplitters in this category have exceptional reflectance at the laser wavelengths, and anti-reflection (AR) coatings to minimize imaging artifacts resulting from the coherent laser light. This laser dichroic beamsplitter is optimized for reflecting laser beams up to 2.5 mm in diameter while minimizing RWE.

Interested in an improved Flatness / RWE version? Consider Semrock's Super-resolution / TIRF dichroics:
1λ P-V RWE on 1mm Di03-R405-t1 , optimized for reflecting laser beams up to 10 mm in diameter while minimizing RWE
λ/5 P-V RWE on 3mm Di03-R405-t3, optimized for reflecting laser beams up to 22.5 mm in diameter while minimizing RWE
  • Price Not Available.
  • Each
    US Domestic pricing – contact your local distributor for other currency list prices
  • Price Not Available.
  • 505.00 USD Each
    US Domestic pricing – contact your local distributor for other currency list prices
  • 0.00
    0.00
  • Notify me when available
Optical Specifications Value
Transmission Band 1 Tavg > 93% 417.4 – 900 nm
Reflection Band 1 Rabs > 94% 372 – 410 nm
Reflection Band 1 (p-pol) Rabs > 90% 372 – 410 nm
Reflection Band 1 (s-pol) Rabs > 98% 372 – 410 nm
Reflection Band 2 Ravg > 90% 350 – 372 nm
Edge Wavelength 1 414 nm
General Filter Specifications Value
Angle of Incidence 45 degrees with a shift of 0.35%/degree (40 – 50 degrees)
Cone Half-angle 0.5 degrees
Optical Damage Rating 1 J/cm² @ 532 nm (10 ns pulse width)
Flatness / RWE Classification   Laser
Reflected Wavefront Error < 6λ P-V RWE @ 632.8 nm
Steepness Steep
Physical Filter Specifications   Value
Transverse Dimensions (L x W) 25.2 mm x 35.6 mm
Transverse Tolerance ± 0.1 mm
Clear Aperture ≥ 80% (elliptical)
Scratch-Dig 60-40
Substrate Type Fused Silica
Filter Thickness (unmounted) 1.05 mm
Filter Thickness (unmounted) 1.05 mm
Filter Thickness Tolerance (unmounted) ± 0.05 mm
Filter Thickness Tolerance (unmounted) ± 0.05 mm
Orientation Reflective surface marked with part number - Orient in direction of incoming light

FF01-390/40-25

FL-004666 / 0

Out of Stock Backordered In Stock
  • Tavg > 93% 370 – 410 nm
  • Center Wavelength of 390 nm and GMBW of 40 nm
  • FWHM of 44.6 nm

FF01-452/45-25

FL-004300 / 0

Out of Stock Backordered In Stock
  • Tavg > 93% 429.5 – 474.5 nm
  • Center Wavelength of 452 nm and GMBW of 45 nm
  • FWHM of 50.5 nm

LL01-407-12.5

FL-007916 / 0

Out of Stock Backordered In Stock
  • Laser Wavelength = 407 nm
  • Tabs > 90% 407 nm
  • FWHM of 1.5 nm (typical); 2.8 nm (maximum)

LD01-405/10-12.5

FL-007696 / 0

Out of Stock Backordered In Stock
  • Laser Wavelength = 405 nm
  • Tabs > 90% 400 – 410 nm
  • Center Wavelength of 405 nm and GMBW of 10 nm

BLP01-405R-25

FL-008529 / 0

Out of Stock Backordered In Stock
  • Filter with 50% edge at 418 nm
  • 595 cm-1 transition
  • Tavg > 93% from 421.5 – 900 nm

NF03-405E-25

FL-009355 / 0

Out of Stock Backordered In Stock
  • Laser Wavelength = 405 nm
  • Typical Notch Bandwidth = 9 nm
  • ODabs > 6 405 nm

NFD01-405-25X36

FL-009323 / 0

Out of Stock Backordered In Stock
  • Laser Wavelength = 405 nm
  • R > 98% 405 nm
  • Tavg > 90% 350 – 386 nm & 464 – 1600 nm

Di03-R405-t1-25x36

FL-007078 / 0

Out of Stock Backordered In Stock
  • Laser Dichroic Beamsplitter with edge at 414 nm,
  • Rabs > 94% 372 – 410 nm
  • Ravg > 90% 350 – 372 nm
  • Tavg > 93% 417.4 – 1200 nm
  •  Flatness / RWE: Super-resolution / TIRF