This filter set is ideal for use with Cy7™ and Alexa Fluor 750, as well as other similar near-infrared fluorophores. The longer excitation and emission wavelengths of these fluorophores enable deeper tissue penetration. The superb brightness and excellent signal-to-noise ratio of this filter set is also ideal since deep tissue imaging applications often also tend to yield very low light levels.
-
EachUS Domestic pricing – contact your local distributor for other currency list prices
-
1,573.00 USD EachUS Domestic pricing – contact your local distributor for other currency list prices
-
-
0.000.00 -
-
- Notify me when available
total selected
Clear selection
Select all 3 products from all pages.
FF02-809/81-25
FL-004520 / 0
- Tavg > 93% 768.5 – 849.5 nm
- Center Wavelength of 809 nm and GMBW of 81 nm
- FWHM of 88.4 nm
FF01-708/75-25
FL-004636 / 0
- Tavg > 93% 671 – 746 nm
- Center Wavelength of 708.5 nm and GMBW of 75 nm
- FWHM of 82.9 nm
FF757-Di01-25x36
FL-007068 / 0
- Dichroic Beamsplitter with edge at 757 nm
- Ravg > 98% 450 – 746 nm
- Tavg > 93% 768 – 1100 nm
- Flatness / RWE: Standard Epi-fluorescence
1 of 1
This set is mounted in a Nikon NQF Quadfluor Fluorescence Filter Holder, which is compatible with Nikon microscopes E200, E400, E600, E800, E1000, TS100, TS100F, TE 200, TE 300, ME600L, L150A, and some Labophot, Optiphot, and Diaphot series.
| Filter Role | Filter Size | Maximum Thickness |
| Exciter (Diameter) | 25.0 mm | 5.0 mm |
| Emitter (Diameter) | 25.0 mm | 3.5 mm |
| Dichroic (L × W) | 25.2 mm × 35.6 mm The Nikon “true” cube needs a Di with corner chamfered (-QF) | 1.1 mm (Can accept a 2 mm dichroic) |
Optimized – Filter set is specifically optimized for that fluorophore.
Compatible – Should result in nearly ideal performance in most situations.
Acceptable – Actual performance is dependent on specific experimental conditions.
| Fluorophore | Peak Excitation Wavelength(nm) | Peak Emission Wavelength(nm) | Compatibility | Display on Plot above |
|---|---|---|---|---|
| Alexa Fluor® 750 | 751 | 776 |
|
|
| ATTO 725 | 727 | 754 |
|
|
| ATTO 740 | 740 | 764 |
|
|
| Cy7™ | 753 | 775 |
|
|
| DiR | 750 | 782 |
|
|
| DyLight 750 | 751 | 778 |
|
|
| HiLyte Fluor™ 750 | 750 | 778 |
|
|
| IRDye 800RS | 787 | 812 |
|
|
| LIVE-DEAD Fixable Near-IR Dead Cell Stain | 752 | 776 |
|
total selected
Clear selection
Select all 3 products from all pages.
FF02-809/81-25
FL-004520 / 0
- Tavg > 93% 768.5 – 849.5 nm
- Center Wavelength of 809 nm and GMBW of 81 nm
- FWHM of 88.4 nm
FF01-708/75-25
FL-004636 / 0
- Tavg > 93% 671 – 746 nm
- Center Wavelength of 708.5 nm and GMBW of 75 nm
- FWHM of 82.9 nm
FF757-Di01-25x36
FL-007068 / 0
- Dichroic Beamsplitter with edge at 757 nm
- Ravg > 98% 450 – 746 nm
- Tavg > 93% 768 – 1100 nm
- Flatness / RWE: Standard Epi-fluorescence
1 of 1
This set is mounted in a Nikon NQF Quadfluor Fluorescence Filter Holder, which is compatible with Nikon microscopes E200, E400, E600, E800, E1000, TS100, TS100F, TE 200, TE 300, ME600L, L150A, and some Labophot, Optiphot, and Diaphot series.
| Filter Role | Filter Size | Maximum Thickness |
| Exciter (Diameter) | 25.0 mm | 5.0 mm |
| Emitter (Diameter) | 25.0 mm | 3.5 mm |
| Dichroic (L × W) | 25.2 mm × 35.6 mm The Nikon “true” cube needs a Di with corner chamfered (-QF) | 1.1 mm (Can accept a 2 mm dichroic) |
You might also be interested in the following products
Adding...
Removing
Processing...
{{productContent.processedProductsCount}} of {{productContent.model.matrixProducts.length}}
Recently Viewed
View All
FF01-340/22-25
FL-004328