This filter set is ideal for use with Cy5 and other fluorophores. This hard-coated filter set is the best value on the market, delivering substantially higher brightness and contrast than the comparable premium soft-coated filter sets.
-
EachUS Domestic pricing – contact your local distributor for other currency list prices
-
1,324.00 USD EachUS Domestic pricing – contact your local distributor for other currency list prices
-
-
0.000.00 -
-
- Notify me when available
total selected
Clear selection
Select all 3 products from all pages.
FF01-630/38-25
FL-004502 / 0
- Tavg > 90% 611 – 649 nm
- Center Wavelength of 630 nm and GMBW of 38 nm
- FWHM of 45.5 nm
FF01-694/44-25
FL-004504 / 0
- Tavg > 90% 672 – 716 nm
- Center Wavelength of 694 nm and GMBW of 44 nm
- FWHM of 52.4 nm
FF655-Di01-25x36
FL-007062 / 0
- Dichroic Beamsplitter with edge at 655 nm
- Ravg > 98% 470 – 645 nm
- Tavg > 90% 665 – 726 nm
- Flatness / RWE: Standard Epi-fluorescence
1 of 1
This set is mounted in a Nikon NQF Quadfluor Fluorescence Filter Holder, which is compatible with Nikon microscopes E200, E400, E600, E800, E1000, TS100, TS100F, TE 200, TE 300, ME600L, L150A, and some Labophot, Optiphot, and Diaphot series.
| Filter Role | Filter Size | Maximum Thickness |
| Exciter (Diameter) | 25.0 mm | 5.0 mm |
| Emitter (Diameter) | 25.0 mm | 3.5 mm |
| Dichroic (L × W) | 25.2 mm × 35.6 mm The Nikon “true” cube needs a Di with corner chamfered (-QF) | 1.1 mm (Can accept a 2 mm dichroic) |
Optimized – Filter set is specifically optimized for that fluorophore.
Compatible – Should result in nearly ideal performance in most situations.
Acceptable – Actual performance is dependent on specific experimental conditions.
| Fluorophore | Peak Excitation Wavelength(nm) | Peak Emission Wavelength(nm) | Compatibility | Display on Plot above |
|---|---|---|---|---|
| 5-carboxynapthofluorescein (pH 10) | 555 | 615 |
|
|
| Alexa Fluor® 647 | 653 | 668 |
|
|
| Alexa Fluor® 660 | 663 | 691 |
|
|
| Alexa Fluor® 680 | 679 | 702 |
|
|
| APC (Allophycocyanin) | 651 | 660 |
|
|
| ATTO 620 | 618 | 642 |
|
|
| ATTO 633 | 629 | 658 |
|
|
| ATTO 635 | 635 | 658 |
|
|
| ATTO 647 | 644 | 670 |
|
|
| ATTO 647N | 645 | 668 |
|
|
| ATTO 655 | 663 | 683 |
|
|
| ATTO 680 | 680 | 700 |
|
|
| BODIPY 650/665-X | 646 | 664 |
|
|
| Carboxynaphthofluorescein | 599 | 674 |
|
|
| Cy5.5™ | 672 | 690 |
|
|
| Cy5™ | 649 | 666 |
|
|
| DiD (DiIC18(5)) - Lipophilic Tracer | 648 | 670 |
|
|
| DyLight 649 | 651 | 673 |
|
|
| DyLight 680 | 676 | 705 |
|
|
| FluoSpheres Crimson fluorescent microspheres | 620 | 646 |
|
|
| FluoSpheres Dark Red fluorescent microspheres | 656 | 683 |
|
|
| HCS CellMask Red cytoplasmic | 622 | 644 |
|
|
| HiLyte Fluor™ 647 | 649 | 673 |
|
|
| LDS 751 | 560 | 711 |
|
|
| LIVE-DEAD Fixable Far Red Dead Cell Stain | 653 | 668 |
|
|
| MitoTracker™ Deep Red | 641 | 662 |
|
|
| Nile blue-EtOH | 631 | 660 |
|
|
| Qdot® 705 Nanocrystals | 300 | 702 |
|
|
| Red 650 | 649 | 665 |
|
|
| SpectrumFRed (Far Red) | 650 | 673 |
|
|
| SYTO 59 | 622 | 644 |
|
|
| SYTO 60 | 650 | 681 |
|
|
| SYTO 61 | 618 | 650 |
|
|
| SYTOX Red-DNA | 640 | 658 |
|
|
| TO-PRO-3 | 642 | 657 |
|
|
| TOTO-3 | 642 | 661 |
|
total selected
Clear selection
Select all 3 products from all pages.
FF01-630/38-25
FL-004502 / 0
- Tavg > 90% 611 – 649 nm
- Center Wavelength of 630 nm and GMBW of 38 nm
- FWHM of 45.5 nm
FF01-694/44-25
FL-004504 / 0
- Tavg > 90% 672 – 716 nm
- Center Wavelength of 694 nm and GMBW of 44 nm
- FWHM of 52.4 nm
FF655-Di01-25x36
FL-007062 / 0
- Dichroic Beamsplitter with edge at 655 nm
- Ravg > 98% 470 – 645 nm
- Tavg > 90% 665 – 726 nm
- Flatness / RWE: Standard Epi-fluorescence
1 of 1
This set is mounted in a Nikon NQF Quadfluor Fluorescence Filter Holder, which is compatible with Nikon microscopes E200, E400, E600, E800, E1000, TS100, TS100F, TE 200, TE 300, ME600L, L150A, and some Labophot, Optiphot, and Diaphot series.
| Filter Role | Filter Size | Maximum Thickness |
| Exciter (Diameter) | 25.0 mm | 5.0 mm |
| Emitter (Diameter) | 25.0 mm | 3.5 mm |
| Dichroic (L × W) | 25.2 mm × 35.6 mm The Nikon “true” cube needs a Di with corner chamfered (-QF) | 1.1 mm (Can accept a 2 mm dichroic) |
You might also be interested in the following products
Adding...
Removing
Processing...
{{productContent.processedProductsCount}} of {{productContent.model.matrixProducts.length}}
Recently Viewed
View All
FF596-Di01-25x36
FL-007156