This filter set is ideal for use with Cyan Fluorescent Protein (CFP) and other similar fluorophores. This hard-coated filter set is the best value on the market, delivering higher brightness than the comparable premium soft-coated filter sets with similar or better contrast.
-
EachUS Domestic pricing – contact your local distributor for other currency list prices
-
1,374.00 USD EachUS Domestic pricing – contact your local distributor for other currency list prices
-
-
0.000.00 -
-
- Notify me when available
total selected
Clear selection
Select all 3 products from all pages.
FF01-434/17-25
FL-004472 / 0
- Tavg > 90% 425.5 – 442.5 nm
- Center Wavelength of 434 nm and GMBW of 17 nm
- FWHM of 21 nm
FF01-479/40-25
FL-004597 / 0
- Tavg > 90% 459 – 499 nm
- Center Wavelength of 479 nm and GMBW of 40 nm
- FWHM of 44.1 nm
FF452-Di01-25x36
FL-007052 / 0
- Dichroic Beamsplitter with edge at 452 nm
- Ravg > 90% 423 – 445 nm
- Tavg > 90% 460 – 610 nm
- Flatness / RWE: Standard Epi-fluorescence
Custom sizing delivery confirmed ARO (sizing fee applies).
1 of 1
This set is mounted in a Leica Microsystems DMi8 (“P-Cube”) Fluorescence Filter Holder, which is compatible with the DMi8 Leica microscope.
| Filter Role | Filter Size | Maximum Thickness |
| Exciter (Diameter) | 25.0 mm | 5.0 mm |
| Emitter (Diameter) | 25.0 mm | 3.5 mm |
| Dichroic (L × W) | 25.2 mm × 35.6 mm | 1.1 mm |
Optimized – Filter set is specifically optimized for that fluorophore.
Compatible – Should result in nearly ideal performance in most situations.
Acceptable – Actual performance is dependent on specific experimental conditions.
| Fluorophore | Peak Excitation Wavelength(nm) | Peak Emission Wavelength(nm) | Compatibility | Display on Plot above |
|---|---|---|---|---|
| Acridine Yellow | 470 | 550 |
|
|
| AmCyan1 | 458 | 489 |
|
|
| Aqua 431 | 430 | 478 |
|
|
| ATTO 425 | 436 | 484 |
|
|
| ATTO 465 | 453 | 507 |
|
|
| BD Horizon V500 | 410 | 500 |
|
|
| BOBO™-1 | 461 | 484 |
|
|
| Cerulean | 434 | 473 |
|
|
| CFP (ECFP) | 433 | 475 |
|
|
| DEAC | 432 | 472 |
|
|
| DY-415 | 418 | 470 |
|
|
| ECFP | 435 | 475 |
|
|
| evoglow-Bs1 | 449 | 496 |
|
|
| LysoSensor Green | 448 | 502 |
|
|
| mBBr+GSH | 394 | 490 |
|
|
| mTFP1 | 462 | 492 |
|
|
| POPO-1 | 433 | 457 |
|
|
| PO-PRO-1 | 433 | 456 |
|
|
| SpectrumAqua | 434 | 481 |
|
|
| SYTO 45 | 451 | 485 |
|
|
| SYTOX Blue | 444 | 470 |
|
|
| TagCFP | 458 | 480 |
|
total selected
Clear selection
Select all 3 products from all pages.
FF01-434/17-25
FL-004472 / 0
- Tavg > 90% 425.5 – 442.5 nm
- Center Wavelength of 434 nm and GMBW of 17 nm
- FWHM of 21 nm
FF01-479/40-25
FL-004597 / 0
- Tavg > 90% 459 – 499 nm
- Center Wavelength of 479 nm and GMBW of 40 nm
- FWHM of 44.1 nm
FF452-Di01-25x36
FL-007052 / 0
- Dichroic Beamsplitter with edge at 452 nm
- Ravg > 90% 423 – 445 nm
- Tavg > 90% 460 – 610 nm
- Flatness / RWE: Standard Epi-fluorescence
Custom sizing delivery confirmed ARO (sizing fee applies).
1 of 1
This set is mounted in a Leica Microsystems DMi8 (“P-Cube”) Fluorescence Filter Holder, which is compatible with the DMi8 Leica microscope.
| Filter Role | Filter Size | Maximum Thickness |
| Exciter (Diameter) | 25.0 mm | 5.0 mm |
| Emitter (Diameter) | 25.0 mm | 3.5 mm |
| Dichroic (L × W) | 25.2 mm × 35.6 mm | 1.1 mm |
You might also be interested in the following products
Adding...
Removing
Processing...
{{productContent.processedProductsCount}} of {{productContent.model.matrixProducts.length}}
Recently Viewed
View All
FF01-340/22-25
FL-004328