This filter set is ideal for use with Brilliant™ Violet 480 and a variety of other blue fluorophores. It is optimized to provide the highest brightness, while maintaining a very high signal-to-noise ratio. Are you co-labeling with BUV395, BV421? This filter set is optimized to minimize crosstalk with BUV395 and BV421.
-
EachUS Domestic pricing – contact your local distributor for other currency list prices
-
1,354.00 USD EachUS Domestic pricing – contact your local distributor for other currency list prices
-
-
0.000.00 -
-
- Notify me when available
total selected
Clear selection
Select all 3 products from all pages.
FF01-483/32-25
FL-004598 / 0
- Tavg > 93% 467 – 499 nm
- Center Wavelength of 483 nm and GMBW of 32 nm
- FWHM of 38.2 nm
FF02-438/24-25
FL-004649 / 0
- Tavg > 93% 426 – 450 nm
- Center Wavelength of 438 nm and GMBW of 24 nm
- FWHM of 29.5 nm
FF458-Di02-25x36
FL-007114 / 0
- Dichroic Beamsplitter with edge at 458 nm
- Ravg > 98% 350 – 450 nm
- Tavg > 93% 467 – 950 nm
- Flatness / RWE: Standard Epi-fluorescence
Custom sizing delivery confirmed ARO (sizing fee applies).
1 of 1
This set is mounted in a ZEISS Microscopy FL CUBE EC P&C Fluorescence Filter Holder, which is compatible with Axio Imager, Axiostar Plus, Axioskop 40, Axioskop 2 (post-2001), Axioplan 2i, Axioplan 2ie, Axiovert 200, Axiovert 40, Axio Observer, Axio Examiner, and Axio Scope A1, from ZEISS Microscopy.
| Filter Role | Filter Size | Maximum Thickness |
| Exciter (Diameter) | 25.0 mm | 5.0 mm |
| Emitter (Diameter) | 25.0 mm | 5.0 mm |
| Dichroic (L × W) | 25.2 mm × 35.6 mm | 1.1 mm |
Optimized – Filter set is specifically optimized for that fluorophore.
Compatible – Should result in nearly ideal performance in most situations.
Acceptable – Actual performance is dependent on specific experimental conditions.
| Fluorophore | Peak Excitation Wavelength(nm) | Peak Emission Wavelength(nm) | Compatibility | Display on Plot above |
|---|---|---|---|---|
| Acridine Yellow | 470 | 550 |
|
|
| AmCyan1 | 458 | 489 |
|
|
| Aqua 431 | 430 | 478 |
|
|
| ATTO 425 | 436 | 484 |
|
|
| ATTO 465 | 453 | 507 |
|
|
| BD Horizon V500 | 410 | 500 |
|
|
| BOBO™-1 | 461 | 484 |
|
|
| BV480 - BD Horizon Brilliant™ Violet 480 | 440 | 479 |
|
|
| Cerulean | 434 | 473 |
|
|
| CFP (ECFP) | 433 | 475 |
|
|
| DY-415 | 418 | 470 |
|
|
| ECFP | 435 | 475 |
|
|
| evoglow-Bs1 | 449 | 496 |
|
|
| LysoSensor Green | 448 | 502 |
|
|
| mBBr+GSH | 394 | 490 |
|
|
| mTFP1 | 462 | 492 |
|
|
| POPO-1 | 433 | 457 |
|
|
| PO-PRO-1 | 433 | 456 |
|
|
| SpectrumAqua | 434 | 481 |
|
|
| SYTO 45 | 451 | 485 |
|
|
| SYTOX Blue | 444 | 470 |
|
|
| TagCFP | 458 | 480 |
|
total selected
Clear selection
Select all 3 products from all pages.
FF01-483/32-25
FL-004598 / 0
- Tavg > 93% 467 – 499 nm
- Center Wavelength of 483 nm and GMBW of 32 nm
- FWHM of 38.2 nm
FF02-438/24-25
FL-004649 / 0
- Tavg > 93% 426 – 450 nm
- Center Wavelength of 438 nm and GMBW of 24 nm
- FWHM of 29.5 nm
FF458-Di02-25x36
FL-007114 / 0
- Dichroic Beamsplitter with edge at 458 nm
- Ravg > 98% 350 – 450 nm
- Tavg > 93% 467 – 950 nm
- Flatness / RWE: Standard Epi-fluorescence
Custom sizing delivery confirmed ARO (sizing fee applies).
1 of 1
This set is mounted in a ZEISS Microscopy FL CUBE EC P&C Fluorescence Filter Holder, which is compatible with Axio Imager, Axiostar Plus, Axioskop 40, Axioskop 2 (post-2001), Axioplan 2i, Axioplan 2ie, Axiovert 200, Axiovert 40, Axio Observer, Axio Examiner, and Axio Scope A1, from ZEISS Microscopy.
| Filter Role | Filter Size | Maximum Thickness |
| Exciter (Diameter) | 25.0 mm | 5.0 mm |
| Emitter (Diameter) | 25.0 mm | 5.0 mm |
| Dichroic (L × W) | 25.2 mm × 35.6 mm | 1.1 mm |
You might also be interested in the following products
Adding...
Removing
Processing...
{{productContent.processedProductsCount}} of {{productContent.model.matrixProducts.length}}
Recently Viewed
View All
FF596-Di01-25x36
FL-007156