532 nm EdgeBasic™ best-value short-pass edge filter

Semrock Part Number: BSP01-532R-25

IDEX Part Number: FL-008528  /

Semrock
EdgeBasic filters offer an ideal combination of performance and value for applications including Raman spectroscopy and fluorescence imaging and measurements. They offer exceptional laser-line blocking and high transmission for Raman applications that do not require measuring the smallest possible Raman shifts and when cost is an issue.
  • Price Not Available.
  • Each
  • Price Not Available.
  • 455.00 USD Each
  • 0.00
    0.00
  • Notify me when available
Optical Specifications Value
Transmission Band 1 Tavg > 80% 350 – 400 nm
Transmission Band 2 Tavg > 93% 400 – 517.1 nm
Blocking Band 1 ODabs > 6 532.0 – 638.4 nm
Blocking Band 2 ODavg > 5 638.4 – 750 nm
Blocking Band 3 ODavg > 4 750 – 925 nm
Blocking Band 4 ODavg > 3 925 – 1200 nm
Edge Wavelength 1 522.7 nm
Edge Steepness (%) 1.5%
Edge Steepness (cm-1) 277.8 cm-1
Edge Steepness (nm) 8.0 nm
Laser Wavelength 1 532 nm
Laser Wavelength 1 (high) 532 nm
Laser Wavelength 1 (low) 532 nm
Transition Width (nm) 13.3 nm
Transition Width (cm-1) 458 cm-1
General Filter Specifications Value
Angle of Incidence 0 ± 2 degrees
Cone Half-angle 5 degrees
Optical Damage Rating Not tested
Physical Filter Specifications   Value
Transverse Dimensions (Diameter) 25 mm
Transverse Tolerance (mounted) + 0.0 / – 0.1 mm
Filter Thickness (Mounted) 3.5 mm
Filter Thickness Tolerance (Mounted) ± 0.1 mm
Clear Aperture ≥ 22 mm
Scratch-Dig 60-40
Substrate Thickness (unmounted) 2.0 mm
Substrate Thickness Tolerance (unmounted) ± 0.1 mm
Orientation Arrow on ring indicates preferred direction of propagation of light

LL01-532-12.5

FL-007949 / 0

Out of Stock Backordered In Stock
  • Laser Wavelength = 532 nm
  • Tabs > 90% 532 nm
  • FWHM of 2.0 nm (typical); 3.7 nm (maximum)

NFD01-532-25x36

FL-009363 / 0

Out of Stock Backordered In Stock
  • Laser Wavelength = 532 nm
  • R > 98% 532 nm
  • Tavg > 90% 350 – 507.5 nm & 570 – 1600 nm

BLP01-532R-25

FL-008541 / 0

Out of Stock Backordered In Stock
  • Filter with 50% edge at 542 nm
  • 458 cm-1 transition
  • Tavg > 93% from 546.9 – 900 nm

SP01-532RU-25

FL-009622 / 0

Out of Stock Backordered In Stock
  • Laser Wavelength = 532 nm
  • 186 cm-1 transition
  • Tavg > 93% 350 – 525.2 nm

LP03-532RU-25

FL-009095 / 0

Out of Stock Backordered In Stock
  • Laser Wavelength = 532 nm
  • 186 cm-1 transition
  • Tavg > 93% 538.9 – 1200 nm

LP03-532RE-25

FL-009094 / 0

Out of Stock Backordered In Stock
  • Laser Wavelength = 532 nm
  • 90 cm-1 transition
  • Tavg > 93% 535.4 – 1200 nm

1 of 1

TopicDescription
Cleaning Optical FiltersInstructions for cleaning hard coated optical filters
Filter ReliabilityCompares the performance and reliability of hard coated filters to traditional soft-coated filters and provides information about the testing standards for Semrock filters
Measuring Light with Wavelengths & WavenumbersCompares units of wavelength to wavenumbers and provides formulas for calculating wavenumber shift
Laser Damage ThresholdProvides information for calculating laser damage threshold for pulsed and continuous wave lasers
Working with Optical Density Tables to describe the relationship between OD and transmission with tips for quickly calculating OD
Filter Spectra at Non-normal Angles of IncidenceDiscusses how angle tuning affects the spectral response of different types of filters.
Filter Types for Raman Spectroscopy ApplicationsCompares the performance of different combinations of LWP and SWP edge filters, notch and laser line filters for Raman applications
RazorEdge Filter LayoutsDescribes two different filter layouts that are commonly used in Raman applications
Journal Article
TopicDescription
Thin-Film Filters for Raman SpectroscopyTuran Erdogan, PhD, and Victor Mizrahi, PhD, Semrock Inc., Spectroscopy, December 2004
Describes the types and functions of filters commonly used in Raman spectroscopy
Application
TopicDescription
Raman SpectroscopyAn overview of Raman spectroscopy, including solutions from Semrock and additional learning resources.

Specifications

TopicDescription
Cleaning Optical FiltersInstructions for cleaning hard coated optical filters
Filter ReliabilityCompares the performance and reliability of hard coated filters to traditional soft-coated filters and provides information about the testing standards for Semrock filters
Measuring Light with Wavelengths & WavenumbersCompares units of wavelength to wavenumbers and provides formulas for calculating wavenumber shift
Laser Damage ThresholdProvides information for calculating laser damage threshold for pulsed and continuous wave lasers
Working with Optical Density Tables to describe the relationship between OD and transmission with tips for quickly calculating OD
Filter Spectra at Non-normal Angles of IncidenceDiscusses how angle tuning affects the spectral response of different types of filters.
Filter Types for Raman Spectroscopy ApplicationsCompares the performance of different combinations of LWP and SWP edge filters, notch and laser line filters for Raman applications
RazorEdge Filter LayoutsDescribes two different filter layouts that are commonly used in Raman applications
Journal Article
TopicDescription
Thin-Film Filters for Raman SpectroscopyTuran Erdogan, PhD, and Victor Mizrahi, PhD, Semrock Inc., Spectroscopy, December 2004
Describes the types and functions of filters commonly used in Raman spectroscopy
Application
TopicDescription
Raman SpectroscopyAn overview of Raman spectroscopy, including solutions from Semrock and additional learning resources.