BrightLine® Pinkel filter set, optimized for FITC & Texas Red and other like fluorophores

Semrock Part Number: FITC/TXRED-2X-B-000

IDEX Part Number: S-001048  /

Semrock

This 4-filter "Pinkel" set is perfectly optimized for imaging FITC and Texas Red with high brightness, extremely low crosstalk, and superb signal-to-noise ratio. It is also very popular for imaging GFP and mCherry. It is comprised of two single-band exciters along with a dual-band beamsplitter and a dual-band emitter, and thus works best with an exciter filter wheel or slider.

  • Price Not Available.
  • Each
    US Domestic pricing – contact your local distributor for other currency list prices
  • Price Not Available.
  • 1,680.00 USD Each
    US Domestic pricing – contact your local distributor for other currency list prices
  • 0.00
    0.00
  • Notify me when available
Filter set mounted in microscope holders/cubes found below in related products section.
Set Components

FF01-524/628-25

FL-004030

Each
  • Tavg > 90% 509.5 – 538.5 nm & Tavg > 90% 611.5 – 644.5 nm
  • Center Wavelengths of 524 nm & 628 nm and GMBWs of 29 nm & 33 nm

FL-004030

FF01-586/20-25x5

FL-004496

Each
• Tavg > 93% 576 – 596 nm
• Center Wavelength of 586 nm and GMBW of 20 nm
• FWHM of 25.9 nm

FL-004496

FF02-485/20-25

FL-004432

Each
  • Tavg > 93% 475 – 495 nm
  • Center Wavelength of 485 nm and GMBW of 20 nm
  • FWHM of 24.9 nm

FL-004432

FF505/606-Di01-25x36

FL-006825

Each
  • Dichroic Beamsplitter with edges at 505 nm & 606 nm
  • Ravg > 95% 458 – 499 nm & Ravg > 95% 570 – 600 nm
  • Tavg > 90% 509 – 541 nm & Tavg > 90% 612 – 647 nm

FL-006825

Optical Specifications Value
Blocking BrightLine filters have blocking far exceeding OD 6 as needed to ensure a black background, even when using modern low-noise CCD cameras. The blocking is optimized for microscopy applications using our exclusive SpecMaker™ fluorescence filter design.
General Filter Specifications Value
Optical Damage Rating Testing has proven to show no signs of degradation when exposed to at least 6.0 W of power from an unfiltered xenon arc lamp over a 25 mm diameter (corresponding to 1.2 W/cm2) for over 500 hours.
Microscope Compatibility BrightLine filters are available to fit Leica, Nikon, Olympus, Zeiss, and Aperio microscopes.
Physical Filter Specifications   Value
Scratch-Dig 60-40
Dichroic Orientation Reflective coating side should face toward light source.

FITC/TXRED-2X-B-NQF

S-001462 / 0

Out of Stock Backordered In Stock

This set is delivered mounted in microscope filter holder, often called 'cube', ready for your microscope.
Nikon Quadfluor for microscopes: E200, E400, E600, E800, E1000, TS100, TS100F, TE200, TE300, ME600L, L150A, and some Labophot, Optiphot, and Diaphot series

FITC/TXRED-2X-B-NTE

S-001463 / 0

Out of Stock Backordered In Stock

This set is delivered mounted in microscope filter holder, often called 'cube', ready for your microscope.
Nikon TE 2000 for microscopes: TE 2000, 50i, 55i, 80i, 90i, Eclipse Ti, Ni, and Ci series, and any using the Epi-fluor Illuminator

FITC/TXRED-2X-B-OMF

S-000203 / 0

Out of Stock Backordered In Stock

This set is delivered mounted in microscope filter holder, often called 'cube', ready for your microscope.
Olympus U-MF2 for microscopes: AX70, BX, BX41, BX50, BX51, BX60, BX61, BX50/51WI, BX60/61WI, IX50, IX51, IX70, IX71, IX81

FITC/TXRED-2X-B-ZHE

S-001465 / 0

Out of Stock Backordered In Stock

This set is delivered mounted in microscope filter holder, often called 'cube', ready for your microscope.
Zeiss FL Cube EC P+C for microscopes: Axio Imager, Axiostar Plus, Axioskop 40, Axioskop 2 (post-2001), Axioplan 2i, Axioplan 2ie, Axiovert 200, Axiovert 40, Axio Observer, Axio Examiner and Axio Scope A1

FITC/TXRED-2X-B-OFF

S-001464 / 0

Out of Stock Backordered In Stock

This set is delivered mounted in microscope filter holder, often called 'cube', ready for your microscope.
Olympus U-FF for microscopes: BX53, BX63

FITC/TXRED-2X-B-LDMK

S-001460 / 0

Out of Stock Backordered In Stock

This set is delivered mounted in microscope filter holder, often called 'cube', ready for your microscope.
Leica DM-K for microscopes: DM-2000, DM-2500, DM-3000, DMI3000 B, DM-4000, DMI4000 B, DM-5000, DM-5500, DM-6000, DMI6000 B, DM4 and DM6

FITC/TXRED-2X-B-LDMP

S-001461 / 0

Out of Stock Backordered In Stock

This set is delivered mounted in microscope filter holder, often called 'cube', ready for your microscope.
Leica DMi8 (P-Cube) for microscopes: DMi8

1 of 1

TopicDescription
Cleaning Optical FiltersInstructions for cleaning hard coated optical filters
Filter ReliabilityCompares the performance and reliability of hard coated filters to traditional soft-coated filters and provides information about the testing standards for Semrock filters
Working with Optical Density Tables to describe the relationship between OD and transmission with tips for quickly calculating OD
What is Pixel Shift, and how does the Semrock ZERO option help? Why Pixel Shift degrades multicolor fluorescence imaging performance, and how the ZERO™ option mitigates this for Avant and BrightLine filter sets.
Optimized – Filter set is specifically optimized for that fluorophore.
Compatible – Should result in nearly ideal performance in most situations.
Acceptable – Actual performance is dependent on specific experimental conditions.
Fluorophore Peak Excitation Wavelength(nm) Peak Emission Wavelength(nm) Compatibility Display on Plot above
2-dodecylresorufin-lipid 582 595
5-carboxy-2,7-dichlorofluorescein 500 525
5-FAM (5-carboxyfluorescein)